aiot/waterDataStatisticsCrossAssociation/dataAssociation/rtuHydrantCorrelationCalculation.c

/*
 *  linux/arch/arm/mach-pxa/z2.c
 *
 *  Support for the Zipit Z2 Handheld device.
 *
 *  Copyright (C) 2009-2010 Marek Vasut <marek.vasut@gmail.com>
 *
 *  Based on research and code by: Ken McGuire
 *  Based on mainstone.c as modified for the Zipit Z2.
 *
 *  This program is free software; you can redistribute it and/or modify
 *  it under the terms of the GNU General Public License version 2 as
 *  published by the Free Software Foundation.
 */

#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/pwm_backlight.h>
#include <linux/z2_battery.h>
#include <linux/dma-mapping.h>
#include <linux/spi/spi.h>
#include <linux/spi/pxa2xx_spi.h>
#include <linux/spi/libertas_spi.h>
#include <linux/spi/lms283gf05.h>
#include <linux/power_supply.h>
#include <linux/mtd/physmap.h>
#include <linux/gpio.h>
#include <linux/gpio_keys.h>
#include <linux/delay.h>
#include <linux/regulator/machine.h>
#include <linux/i2c/pxa-i2c.h>

#include <asm/mach-types.h>
#include <asm/mach/arch.h>

#include <mach/pxa27x.h>
#include <mach/mfp-pxa27x.h>
#include <mach/z2.h>
#include <linux/platform_data/video-pxafb.h>
#include <linux/platform_data/mmc-pxamci.h>
#include <linux/platform_data/keypad-pxa27x.h>
#include <mach/pm.h>

#include "generic.h"
#include "devices.h"

/******************************************************************************
 * Pin configuration
 ******************************************************************************/
static unsigned long z2_pin_config[] = {

	/* LCD - 16bpp Active TFT */
	GPIO58_LCD_LDD_0,
	GPIO59_LCD_LDD_1,
	GPIO60_LCD_LDD_2,
	GPIO61_LCD_LDD_3,
	GPIO62_LCD_LDD_4,
	GPIO63_LCD_LDD_5,
	GPIO64_LCD_LDD_6,
	GPIO65_LCD_LDD_7,
	GPIO66_LCD_LDD_8,
	GPIO67_LCD_LDD_9,
	GPIO68_LCD_LDD_10,
	GPIO69_LCD_LDD_11,
	GPIO70_LCD_LDD_12,
	GPIO71_LCD_LDD_13,
	GPIO72_LCD_LDD_14,
	GPIO73_LCD_LDD_15,
	GPIO74_LCD_FCLK,
	GPIO75_LCD_LCLK,
	GPIO76_LCD_PCLK,
	GPIO77_LCD_BIAS,
	GPIO19_GPIO,		/* LCD reset */
	GPIO88_GPIO,		/* LCD chipselect */

	/* PWM */
	GPIO115_PWM1_OUT,	/* Keypad Backlight */
	GPIO11_PWM2_OUT,	/* LCD Backlight */

	/* MMC */
	GPIO32_MMC_CLK,
	GPIO112_MMC_CMD,
	GPIO92_MMC_DAT_0,
	GPIO109_MMC_DAT_1,
	GPIO110_MMC_DAT_2,
	GPIO111_MMC_DAT_3,
	GPIO96_GPIO,		/* SD detect */

	/* STUART */
	GPIO46_STUART_RXD,
	GPIO47_STUART_TXD,

	/* Keypad */
	GPIO100_KP_MKIN_0,
	GPIO101_KP_MKIN_1,
	GPIO102_KP_MKIN_2,
	GPIO34_KP_MKIN_3,
	GPIO38_KP_MKIN_4,
	GPIO16_KP_MKIN_5,
	GPIO17_KP_MKIN_6,
	GPIO103_KP_MKOUT_0,
	GPIO104_KP_MKOUT_1,
	GPIO105_KP_MKOUT_2,
	GPIO106_KP_MKOUT_3,
	GPIO107_KP_MKOUT_4,
	GPIO108_KP_MKOUT_5,
	GPIO35_KP_MKOUT_6,
	GPIO41_KP_MKOUT_7,

	/* I2C */
	GPIO117_I2C_SCL,
	GPIO118_I2C_SDA,

	/* SSP1 */
	GPIO23_SSP1_SCLK,	/* SSP1_SCK */
	GPIO25_SSP1_TXD,	/* SSP1_TXD */
	GPIO26_SSP1_RXD,	/* SSP1_RXD */

	/* SSP2 */
	GPIO22_SSP2_SCLK,	/* SSP2_SCK */
	GPIO13_SSP2_TXD,	/* SSP2_TXD */
	GPIO40_SSP2_RXD,	/* SSP2_RXD */

	/* LEDs */
	GPIO10_GPIO,		/* WiFi LED */
	GPIO83_GPIO,		/* Charging LED */
	GPIO85_GPIO,		/* Charged LED */

	/* I2S */
	GPIO28_I2S_BITCLK_OUT,
	GPIO29_I2S_SDATA_IN,
	GPIO30_I2S_SDATA_OUT,
	GPIO31_I2S_SYNC,
	GPIO113_I2S_SYSCLK,

	/* MISC */
	GPIO0_GPIO,		/* AC power detect */
	GPIO1_GPIO,		/* Power button */
	GPIO37_GPIO,		/* Headphone detect */
	GPIO98_GPIO,		/* Lid switch */
	GPIO14_GPIO,		/* WiFi Power */
	GPIO24_GPIO,		/* WiFi CS */
	GPIO36_GPIO,		/* WiFi IRQ */
	GPIO88_GPIO,		/* LCD CS */
};

/******************************************************************************
 * NOR Flash
 ******************************************************************************/
#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
static struct resource z2_flash_resource = {
	.start	= PXA_CS0_PHYS,
	.end	= PXA_CS0_PHYS + SZ_8M - 1,
	.flags	= IORESOURCE_MEM,
};

static struct mtd_partition z2_flash_parts[] = {
	{
		.name	= "U-Boot Bootloader",
		.offset	= 0x0,
		.size	= 0x40000,
	}, {
		.name	= "U-Boot Environment",
		.offset	= 0x40000,
		.size	= 0x20000,
	}, {
		.name	= "Flash",
		.offset	= 0x60000,
		.size	= MTDPART_SIZ_FULL,
	},
};

static struct physmap_flash_data z2_flash_data = {
	.width		= 2,
	.parts		= z2_flash_parts,
	.nr_parts	= ARRAY_SIZE(z2_flash_parts),
};

static struct platform_device z2_flash = {
	.name		= "physmap-flash",
	.id		= -1,
	.resource	= &z2_flash_resource,
	.num_resources	= 1,
	.dev = {
		.platform_data	= &z2_flash_data,
	},
};

static void __init z2_nor_init(void)
{
	platform_device_register(&z2_flash);
}
#else
static inline void z2_nor_init(void) {}
#endif

/******************************************************************************
 * Backlight
 ******************************************************************************/
#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
static struct platform_pwm_backlight_data z2_backlight_data[] = {
	[0] = {
		/* Keypad Backlight */
		.pwm_id		= 1,
		.max_brightness	= 1023,
		.dft_brightness	= 0,
		.pwm_period_ns	= 1260320,
	},
	[1] = {
		/* LCD Backlight */
		.pwm_id		= 2,
		.max_brightness	= 1023,
		.dft_brightness	= 512,
		.pwm_period_ns	= 1260320,
	},
};

static struct platform_device z2_backlight_devices[2] = {
	{
		.name	= "pwm-backlight",
		.id	= 0,
		.dev	= {
			.platform_data	= &z2_backlight_data[1],
		},
	},
	{
		.name	= "pwm-backlight",
		.id	= 1,
		.dev	= {
			.platform_data	= &z2_backlight_data[0],
		},
	},
};
static void __init z2_pwm_init(void)
{
	platform_device_register(&z2_backlight_devices[0]);
	platform_device_register(&z2_backlight_devices[1]);
}
#else
static inline void z2_pwm_init(void) {}
#endif

/******************************************************************************
 * Framebuffer
 ******************************************************************************/
#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
static struct pxafb_mode_info z2_lcd_modes[] = {
{
	.pixclock	= 192000,
	.xres		= 240,
	.yres		= 320,
	.bpp		= 16,

	.left_margin	= 4,
	.right_margin	= 8,
	.upper_margin	= 4,
	.lower_margin	= 8,

	.hsync_len	= 4,
	.vsync_len	= 4,
},
};

static struct pxafb_mach_info z2_lcd_screen = {
	.modes		= z2_lcd_modes,
	.num_modes      = ARRAY_SIZE(z2_lcd_modes),
	.lcd_conn	= LCD_COLOR_TFT_16BPP | LCD_BIAS_ACTIVE_LOW |
			  LCD_ALTERNATE_MAPPING,
};

static void __init z2_lcd_init(void)
{
	pxa_set_fb_info(NULL, &z2_lcd_screen);
}
#else
static inline void z2_lcd_init(void) {}
#endif

/******************************************************************************
 * SD/MMC card controller
 ******************************************************************************/
#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
static struct pxamci_platform_data z2_mci_platform_data = {
	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
	.gpio_card_detect	= GPIO96_ZIPITZ2_SD_DETECT,
	.gpio_power		= -1,
	.gpio_card_ro		= -1,
	.detect_delay_ms	= 200,
};

static void __init z2_mmc_init(void)
{
	pxa_set_mci_info(&z2_mci_platform_data);
}
#else
static inline void z2_mmc_init(void) {}
#endif

/******************************************************************************
 * LEDs
 ******************************************************************************/
#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
struct gpio_led z2_gpio_leds[] = {
{
	.name			= "z2:green:wifi",
	.default_trigger	= "none",
	.gpio			= GPIO10_ZIPITZ2_LED_WIFI,
	.active_low		= 1,
}, {