aiot/waterDataDiscreteRateMining/monitoringDataProcessing/connectionSignalSlot.c

/*
 * KZM-A9-GT board support
 *
 * Copyright (C) 2012	Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; version 2 of the License.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
 */

#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/gpio_keys.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/i2c.h>
#include <linux/i2c/pcf857x.h>
#include <linux/input.h>
#include <linux/mmc/host.h>
#include <linux/mmc/sh_mmcif.h>
#include <linux/mmc/sh_mobile_sdhi.h>
#include <linux/mfd/tmio.h>
#include <linux/platform_device.h>
#include <linux/regulator/fixed.h>
#include <linux/regulator/machine.h>
#include <linux/smsc911x.h>
#include <linux/usb/r8a66597.h>
#include <linux/usb/renesas_usbhs.h>
#include <linux/videodev2.h>
#include <sound/sh_fsi.h>
#include <sound/simple_card.h>
#include <mach/irqs.h>
#include <mach/sh73a0.h>
#include <mach/common.h>
#include <asm/hardware/cache-l2x0.h>
#include <asm/hardware/gic.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <video/sh_mobile_lcdc.h>

/*
 * external GPIO
 */
#define GPIO_PCF8575_BASE	(GPIO_NR)
#define GPIO_PCF8575_PORT10	(GPIO_NR + 8)
#define GPIO_PCF8575_PORT11	(GPIO_NR + 9)
#define GPIO_PCF8575_PORT12	(GPIO_NR + 10)
#define GPIO_PCF8575_PORT13	(GPIO_NR + 11)
#define GPIO_PCF8575_PORT14	(GPIO_NR + 12)
#define GPIO_PCF8575_PORT15	(GPIO_NR + 13)
#define GPIO_PCF8575_PORT16	(GPIO_NR + 14)

/* Dummy supplies, where voltage doesn't matter */
static struct regulator_consumer_supply dummy_supplies[] = {
	REGULATOR_SUPPLY("vddvario", "smsc911x"),
	REGULATOR_SUPPLY("vdd33a", "smsc911x"),
};

/*
 * FSI-AK4648
 *
 * this command is required when playback.
 *
 * # amixer set "LINEOUT Mixer DACL" on
 */

/* SMSC 9221 */
static struct resource smsc9221_resources[] = {
	[0] = {
		.start	= 0x10000000, /* CS4 */
		.end	= 0x100000ff,
		.flags	= IORESOURCE_MEM,
	},
	[1] = {
		.start	= intcs_evt2irq(0x260), /* IRQ3 */
		.flags	= IORESOURCE_IRQ,
	},
};

static struct smsc911x_platform_config smsc9221_platdata = {
	.flags		= SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
	.phy_interface	= PHY_INTERFACE_MODE_MII,
	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
};

static struct platform_device smsc_device = {
	.name		= "smsc911x",
	.dev  = {
		.platform_data = &smsc9221_platdata,
	},
	.resource	= smsc9221_resources,
	.num_resources	= ARRAY_SIZE(smsc9221_resources),
};

/* USB external chip */
static struct r8a66597_platdata usb_host_data = {
	.on_chip	= 0,
	.xtal		= R8A66597_PLATDATA_XTAL_48MHZ,
};

static struct resource usb_resources[] = {
	[0] = {
		.start	= 0x10010000,
		.end	= 0x1001ffff - 1,
		.flags	= IORESOURCE_MEM,
	},
	[1] = {
		.start	= intcs_evt2irq(0x220), /* IRQ1 */
		.flags	= IORESOURCE_IRQ,
	},
};

static struct platform_device usb_host_device = {
	.name	= "r8a66597_hcd",
	.dev = {
		.platform_data		= &usb_host_data,
		.dma_mask		= NULL,
		.coherent_dma_mask	= 0xffffffff,
	},
	.num_resources	= ARRAY_SIZE(usb_resources),
	.resource	= usb_resources,
};

/* USB Func CN17 */
struct usbhs_private {
	void __iomem *phy;
	void __iomem *cr2;
	struct renesas_usbhs_platform_info info;
};

#define IRQ15			intcs_evt2irq(0x03e0)
#define USB_PHY_MODE		(1 << 4)
#define USB_PHY_INT_EN		((1 << 3) | (1 << 2))
#define USB_PHY_ON		(1 << 1)
#define USB_PHY_OFF		(1 << 0)
#define USB_PHY_INT_CLR		(USB_PHY_ON | USB_PHY_OFF)

#define usbhs_get_priv(pdev) \
	container_of(renesas_usbhs_get_info(pdev), struct usbhs_private, info)

static int usbhs_get_vbus(struct platform_device *pdev)
{
	struct usbhs_private *priv = usbhs_get_priv(pdev);

	return !((1 << 7) & __raw_readw(priv->cr2));
}

static void usbhs_phy_reset(struct platform_device *pdev)
{
	struct usbhs_private *priv = usbhs_get_priv(pdev);

	/* init phy */
	__raw_writew(0x8a0a, priv->cr2);
}

static int usbhs_get_id(struct platform_device *pdev)
{
	return USBHS_GADGET;
}

static irqreturn_t usbhs_interrupt(int irq, void *data)
{
	struct platform_device *pdev = data;
	struct usbhs_private *priv = usbhs_get_priv(pdev);

	renesas_usbhs_call_notify_hotplug(pdev);

	/* clear status */
	__raw_writew(__raw_readw(priv->phy) | USB_PHY_INT_CLR, priv->phy);

	return IRQ_HANDLED;
}

static int usbhs_hardware_init(struct platform_device *pdev)
{
	struct usbhs_private *priv = usbhs_get_priv(pdev);
	int ret;

	/* clear interrupt status */
	__raw_writew(USB_PHY_MODE | USB_PHY_INT_CLR, priv->phy);

	ret = request_irq(IRQ15, usbhs_interrupt, IRQF_TRIGGER_HIGH,
			  dev_name(&pdev->dev), pdev);
	if (ret) {
		dev_err(&pdev->dev, "request_irq err\n");
		return ret;
	}

	/* enable USB phy interrupt */
	__raw_writew(USB_PHY_MODE | USB_PHY_INT_EN, priv->phy);

	return 0;
}

static void usbhs_hardware_exit(struct platform_device *pdev)
{
	struct usbhs_private *priv = usbhs_get_priv(pdev);

	/* clear interrupt status */
	__raw_writew(USB_PHY_MODE | USB_PHY_INT_CLR, priv->phy);

	free_irq(IRQ15, pdev);
}

static u32 usbhs_pipe_cfg[] = {
	USB_ENDPOINT_XFER_CONTROL,
	USB_ENDPOINT_XFER_ISOC,
	USB_ENDPOINT_XFER_ISOC,
	USB_ENDPOINT_XFER_BULK,
	USB_ENDPOINT_XFER_BULK,
	USB_ENDPOINT_XFER_BULK,
	USB_ENDPOINT_XFER_INT,
	USB_ENDPOINT_XFER_INT,
	USB_ENDPOINT_XFER_INT,
	USB_ENDPOINT_XFER_BULK,
	USB_ENDPOINT_XFER_BULK,
	USB_ENDPOINT_XFER_BULK,
	USB_ENDPOINT_XFER_BULK,
	USB_ENDPOINT_XFER_BULK,
	USB_ENDPOINT_XFER_BULK,
	USB_ENDPOINT_XFER_BULK,
};

static struct usbhs_private usbhs_private = {
	.phy	= IOMEM(0xe60781e0),		/* USBPHYINT */
	.cr2	= IOMEM(0xe605810c),		/* USBCR2 */
	.info = {
		.platform_callback = {
			.hardware_init	= usbhs_hardware_init,
			.hardware_exit	= usbhs_hardware_exit,
			.get_id		= usbhs_get_id,
			.phy_reset	= usbhs_phy_reset,
			.get_vbus	= usbhs_get_vbus,
		},
		.driver_param = {
			.buswait_bwait	= 4,
			.has_otg	= 1,
			.pipe_type	= usbhs_pipe_cfg,
			.pipe_size	= ARRAY_SIZE(usbhs_pipe_cfg),
		},
	},
};

static struct resource usbhs_resources[] = {
	[0] = {
		.start	= 0xE6890000,
		.end	= 0xE68900e6 - 1,
		.flags	= IORESOURCE_MEM,
	},
	[1] = {
		.start	= gic_spi(62),
		.end	= gic_spi(62),
		.flags	= IORESOURCE_IRQ,
	},
};

static struct platform_device usbhs_device = {
	.name	= "renesas_usbhs",
	.id	= -1,
	.dev = {
		.dma_mask		= NULL,
		.coherent_dma_mask	= 0xffffffff,
		.platform_data		= &usbhs_private.info,
	},
	.num_resources	= ARRAY_SIZE(usbhs_resources),
	.resource	= usbhs_resources,
};

/* LCDC */
static struct fb_videomode kzm_lcdc_mode = {
	.name		= "WVGA Panel",
	.xres		= 800,
	.yres		= 480,
	.left_margin	= 220,
	.right_margin	= 110,
	.hsync_len	= 70,
	.upper_margin	= 20,
	.lower_margin	= 5,
	.vsync_len	= 5,
	.sync		= 0,
};

static struct sh_mobile_lcdc_info lcdc_info = {
	.clock_source = LCDC_CLK_BUS,
	.ch[0] = {
		.chan		= LCDC_CHAN_MAINLCD,
		.fourcc		= V4L2_PIX_FMT_RGB565,
		.interface_type	= RGB24,
		.lcd_modes	= &kzm_lcdc_mode,
		.num_modes	= 1,
		.clock_divider	= 5,
		.flags		= 0,
		.panel_cfg = {
			.width	= 152,
			.height	= 91,
		},
	}
};

static struct resource lcdc_resources[] = {
	[0] = {
		.name	= "LCDC",
		.start	= 0xfe940000,
		.end	= 0xfe943fff,
		.flags	= IORESOURCE_MEM,
	},
	[1] = {
		.start	= intcs_evt2irq(0x580),
		.flags	= IORESOURCE_IRQ,
	},
};

static struct platform_device lcdc_device = {
	.name		= "sh_mobile_lcdc_fb",
	.num_resources	= ARRAY_SIZE(lcdc_resources),
	.resource	= lcdc_resources,
	.dev	= {
		.platform_data	= &lcdc_info,
		.coherent_dma_mask = ~0,
	},
};

/* Fixed 1.8V regulator to be used by MMCIF */
static struct regulator_consumer_supply fixed1v8_power_consumers[] =
{
	REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"),
	REGULATOR_SUPPLY("vqmmc", "sh_mmcif.0"),
};

/* MMCIF */
static struct resource sh_mmcif_resources[] = {
	[0] = {
		.name	= "MMCIF",
		.start	= 0xe6bd0000,
		.end	= 0xe6bd00ff,
		.flags	= IORESOURCE_MEM,
	},
	[1] = {
		.start	= gic_spi(140),
		.flags	= IORESOURCE_IRQ,
	},
	[2] = {
		.start	= gic_spi(141),
		.flags	= IORESOURCE_IRQ,
	},
};

static struct sh_mmcif_plat_data sh_mmcif_platdata = {
	.ocr		= MMC_VDD_165_195,
	.caps		= MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE,
	.slave_id_tx	= SHDMA_SLAVE_MMCIF_TX,
	.slave_id_rx	= SHDMA_SLAVE_MMCIF_RX,
};

static struct platform_device mmc_device = {
	.name		= "sh_mmcif",
	.dev		= {
		.dma_mask		= NULL,
		.coherent_dma_mask	= 0xffffffff,
		.platform_data		= &sh_mmcif_platdata,
	},
	.num_resources	= ARRAY_SIZE(sh_mmcif_resources),
	.resource	= sh_mmcif_resources,
};

/* Fixed 2.8V regulators to be used by SDHI0 and SDHI2 */
static struct regulator_consumer_supply fixed2v8_power_consumers[] =
{
	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
	REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.2"),
	REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.2"),
};

/* SDHI */
static struct sh_mobile_sdhi_info sdhi0_info = {
	.dma_slave_tx	= SHDMA_SLAVE_SDHI0_TX,
	.dma_slave_rx	= SHDMA_SLAVE_SDHI0_RX,
	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT,
	.tmio_caps	= MMC_CAP_SD_HIGHSPEED,
	.tmio_ocr_mask	= MMC_VDD_27_28 | MMC_VDD_28_29,
};

static struct resource sdhi0_resources[] = {
	[0] = {
		.name	= "SDHI0",
		.start	= 0xee100000,
		.end	= 0xee1000ff,
		.flags	= IORESOURCE_MEM,
	},
	[1] = {
		.name	= SH_MOBILE_SDHI_IRQ_CARD_DETECT,
		.start	= gic_spi(83),
		.flags	= IORESOURCE_IRQ,
	},
	[2] = {
		.name	= SH_MOBILE_SDHI_IRQ_SDCARD,
		.start	= gic_spi(84),