| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278 | 
							- /*
 
-  *  linux/arch/arm/mach-nomadik/board-8815nhk.c
 
-  *
 
-  *  Copyright (C) STMicroelectronics
 
-  *
 
-  * This program is free software; you can redistribute it and/or modify
 
-  * it under the terms of the GNU General Public License version 2, as
 
-  * published by the Free Software Foundation.
 
-  *
 
-  *  NHK15 board specifc driver definition
 
-  */
 
- #include <linux/types.h>
 
- #include <linux/kernel.h>
 
- #include <linux/init.h>
 
- #include <linux/platform_device.h>
 
- #include <linux/amba/bus.h>
 
- #include <linux/amba/mmci.h>
 
- #include <linux/interrupt.h>
 
- #include <linux/gpio.h>
 
- #include <linux/mtd/mtd.h>
 
- #include <linux/mtd/nand.h>
 
- #include <linux/mtd/fsmc.h>
 
- #include <linux/mtd/onenand.h>
 
- #include <linux/mtd/partitions.h>
 
- #include <linux/i2c.h>
 
- #include <linux/io.h>
 
- #include <linux/pinctrl/machine.h>
 
- #include <linux/platform_data/pinctrl-nomadik.h>
 
- #include <linux/platform_data/clocksource-nomadik-mtu.h>
 
- #include <asm/hardware/vic.h>
 
- #include <asm/sizes.h>
 
- #include <asm/mach-types.h>
 
- #include <asm/mach/arch.h>
 
- #include <asm/mach/flash.h>
 
- #include <asm/mach/time.h>
 
- #include <mach/irqs.h>
 
- #include "cpu-8815.h"
 
- /* Initial value for SRC control register: all timers use MXTAL/8 source */
 
- #define SRC_CR_INIT_MASK	0x00007fff
 
- #define SRC_CR_INIT_VAL		0x2aaa8000
 
- #define ALE_OFF 0x1000000
 
- #define CLE_OFF 0x800000
 
- /* These addresses span 16MB, so use three individual pages */
 
- static struct resource nhk8815_nand_resources[] = {
 
- 	{
 
- 		.name = "nand_data",
 
- 		.start = 0x40000000,
 
- 		.end = 0x40000000 + SZ_16K - 1,
 
- 		.flags = IORESOURCE_MEM,
 
- 	}, {
 
- 		.name = "nand_addr",
 
- 		.start = 0x40000000 + ALE_OFF,
 
- 		.end = 0x40000000 +ALE_OFF + SZ_16K - 1,
 
- 		.flags = IORESOURCE_MEM,
 
- 	}, {
 
- 		.name = "nand_cmd",
 
- 		.start = 0x40000000 + CLE_OFF,
 
- 		.end = 0x40000000 + CLE_OFF + SZ_16K - 1,
 
- 		.flags = IORESOURCE_MEM,
 
- 	}, {
 
- 		.name  = "fsmc_regs",
 
- 		.start = NOMADIK_FSMC_BASE,
 
- 		.end   = NOMADIK_FSMC_BASE + SZ_4K - 1,
 
- 		.flags = IORESOURCE_MEM,
 
- 	},
 
- };
 
- /*
 
-  * These partitions are the same as those used in the 2.6.20 release
 
-  * shipped by the vendor; the first two partitions are mandated
 
-  * by the boot ROM, and the bootloader area is somehow oversized...
 
-  */
 
- static struct mtd_partition nhk8815_partitions[] = {
 
- 	{
 
- 		.name	= "X-Loader(NAND)",
 
- 		.offset = 0,
 
- 		.size	= SZ_256K,
 
- 	}, {
 
- 		.name	= "MemInit(NAND)",
 
- 		.offset	= MTDPART_OFS_APPEND,
 
- 		.size	= SZ_256K,
 
- 	}, {
 
- 		.name	= "BootLoader(NAND)",
 
- 		.offset	= MTDPART_OFS_APPEND,
 
- 		.size	= SZ_2M,
 
- 	}, {
 
- 		.name	= "Kernel zImage(NAND)",
 
- 		.offset	= MTDPART_OFS_APPEND,
 
- 		.size	= 3 * SZ_1M,
 
- 	}, {
 
- 		.name	= "Root Filesystem(NAND)",
 
- 		.offset	= MTDPART_OFS_APPEND,
 
- 		.size	= 22 * SZ_1M,
 
- 	}, {
 
- 		.name	= "User Filesystem(NAND)",
 
- 		.offset	= MTDPART_OFS_APPEND,
 
- 		.size	= MTDPART_SIZ_FULL,
 
- 	}
 
- };
 
- static struct fsmc_nand_timings nhk8815_nand_timings = {
 
- 	.thiz	= 0,
 
- 	.thold	= 0x10,
 
- 	.twait	= 0x0A,
 
- 	.tset	= 0,
 
- };
 
- static struct fsmc_nand_platform_data nhk8815_nand_platform_data = {
 
- 	.nand_timings = &nhk8815_nand_timings,
 
- 	.partitions = nhk8815_partitions,
 
- 	.nr_partitions = ARRAY_SIZE(nhk8815_partitions),
 
- 	.width = FSMC_NAND_BW8,
 
- };
 
- static struct platform_device nhk8815_nand_device = {
 
- 	.name = "fsmc-nand",
 
- 	.id = -1,
 
- 	.resource = nhk8815_nand_resources,
 
- 	.num_resources = ARRAY_SIZE(nhk8815_nand_resources),
 
- 	.dev = {
 
- 		.platform_data = &nhk8815_nand_platform_data,
 
- 	},
 
- };
 
- /* These are the partitions for the OneNand device, different from above */
 
- static struct mtd_partition nhk8815_onenand_partitions[] = {
 
- 	{
 
- 		.name	= "X-Loader(OneNAND)",
 
- 		.offset = 0,
 
- 		.size	= SZ_256K,
 
- 	}, {
 
- 		.name	= "MemInit(OneNAND)",
 
- 		.offset	= MTDPART_OFS_APPEND,
 
- 		.size	= SZ_256K,
 
- 	}, {
 
- 		.name	= "BootLoader(OneNAND)",
 
- 		.offset	= MTDPART_OFS_APPEND,
 
- 		.size	= SZ_2M-SZ_256K,
 
- 	}, {
 
- 		.name	= "SysImage(OneNAND)",
 
- 		.offset	= MTDPART_OFS_APPEND,
 
- 		.size	= 4 * SZ_1M,
 
- 	}, {
 
- 		.name	= "Root Filesystem(OneNAND)",
 
- 		.offset	= MTDPART_OFS_APPEND,
 
- 		.size	= 22 * SZ_1M,
 
- 	}, {
 
- 		.name	= "User Filesystem(OneNAND)",
 
- 		.offset	= MTDPART_OFS_APPEND,
 
- 		.size	= MTDPART_SIZ_FULL,
 
- 	}
 
- };
 
- static struct onenand_platform_data nhk8815_onenand_data = {
 
- 	.parts		= nhk8815_onenand_partitions,
 
- 	.nr_parts	= ARRAY_SIZE(nhk8815_onenand_partitions),
 
- };
 
- static struct resource nhk8815_onenand_resource[] = {
 
- 	{
 
- 		.start		= 0x30000000,
 
- 		.end		= 0x30000000 + SZ_128K - 1,
 
- 		.flags		= IORESOURCE_MEM,
 
- 	},
 
- };
 
- static struct platform_device nhk8815_onenand_device = {
 
- 	.name		= "onenand-flash",
 
- 	.id		= -1,
 
- 	.dev		= {
 
- 		.platform_data	= &nhk8815_onenand_data,
 
- 	},
 
- 	.resource	= nhk8815_onenand_resource,
 
- 	.num_resources	= ARRAY_SIZE(nhk8815_onenand_resource),
 
- };
 
- /* bus control reg. and bus timing reg. for CS0..CS3 */
 
- #define FSMC_BCR(x)	(NOMADIK_FSMC_VA + (x << 3))
 
- #define FSMC_BTR(x)	(NOMADIK_FSMC_VA + (x << 3) + 0x04)
 
- static void __init nhk8815_onenand_init(void)
 
- {
 
- #ifdef CONFIG_MTD_ONENAND
 
-        /* Set up SMCS0 for OneNand */
 
- 	writel(0x000030db, FSMC_BCR(0));
 
- 	writel(0x02100551, FSMC_BTR(0));
 
- #endif
 
- }
 
- static struct mmci_platform_data mmcsd_plat_data = {
 
- 	.ocr_mask = MMC_VDD_29_30,
 
- 	.f_max = 48000000,
 
- 	.gpio_wp = -1,
 
- 	.gpio_cd = 111,
 
- 	.cd_invert = true,
 
- 	.capabilities = MMC_CAP_MMC_HIGHSPEED |
 
- 	MMC_CAP_SD_HIGHSPEED | MMC_CAP_4_BIT_DATA,
 
- };
 
- static int __init nhk8815_mmcsd_init(void)
 
- {
 
- 	int ret;
 
- 	ret = gpio_request(112, "card detect bias");
 
- 	if (ret)
 
- 		return ret;
 
- 	gpio_direction_output(112, 0);
 
- 	amba_apb_device_add(NULL, "mmci", NOMADIK_SDI_BASE, SZ_4K, IRQ_SDMMC, 0, &mmcsd_plat_data, 0x10180180);
 
- 	return 0;
 
- }
 
- module_init(nhk8815_mmcsd_init);
 
- static struct resource nhk8815_eth_resources[] = {
 
- 	{
 
- 		.name = "smc91x-regs",
 
- 		.start = 0x34000000 + 0x300,
 
- 		.end = 0x34000000 + SZ_64K - 1,
 
- 		.flags = IORESOURCE_MEM,
 
- 	}, {
 
- 		.start = NOMADIK_GPIO_TO_IRQ(115),
 
- 		.end = NOMADIK_GPIO_TO_IRQ(115),
 
- 		.flags = IORESOURCE_IRQ | IRQF_TRIGGER_RISING,
 
- 	}
 
- };
 
- static struct platform_device nhk8815_eth_device = {
 
- 	.name = "smc91x",
 
- 	.resource = nhk8815_eth_resources,
 
- 	.num_resources = ARRAY_SIZE(nhk8815_eth_resources),
 
- };
 
- static int __init nhk8815_eth_init(void)
 
- {
 
- 	int gpio_nr = 115; /* hardwired in the board */
 
- 	int err;
 
- 	err = gpio_request(gpio_nr, "eth_irq");
 
- 	if (!err) err = nmk_gpio_set_mode(gpio_nr, NMK_GPIO_ALT_GPIO);
 
- 	if (!err) err = gpio_direction_input(gpio_nr);
 
- 	if (err)
 
- 		pr_err("Error %i in %s\n", err, __func__);
 
- 	return err;
 
- }
 
- device_initcall(nhk8815_eth_init);
 
- static struct platform_device *nhk8815_platform_devices[] __initdata = {
 
- 	&nhk8815_nand_device,
 
- 	&nhk8815_onenand_device,
 
- 	&nhk8815_eth_device,
 
- 	/* will add more devices */
 
- };
 
- static void __init nomadik_timer_init(void)
 
- {
 
- 	u32 src_cr;
 
- 	/* Configure timer sources in "system reset controller" ctrl reg */
 
- 	src_cr = readl(io_p2v(NOMADIK_SRC_BASE));
 
- 	src_cr &= SRC_CR_INIT_MASK;
 
- 	src_cr |= SRC_CR_INIT_VAL;
 
- 	writel(src_cr, io_p2v(NOMADIK_SRC_BASE));
 
- 	nmdk_timer_init(io_p2v(NOMADIK_MTU0_BASE), IRQ_MTU0);
 
- }
 
- static struct sys_timer nomadik_timer = {
 
- 	.init	= nomadik_timer_init,
 
- };
 
- static struct i2c_board_info __initdata nhk8815_i2c0_devices[] = {
 
- 	{
 
- 		I2C_BOARD_INFO("stw4811", 0x2d),
 
- 	},
 
- };
 
 
  |