123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232 |
- /*
- * marzen board support
- *
- * Copyright (C) 2011 Renesas Solutions Corp.
- * Copyright (C) 2011 Magnus Damm
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
- #include <linux/kernel.h>
- #include <linux/init.h>
- #include <linux/interrupt.h>
- #include <linux/irq.h>
- #include <linux/platform_device.h>
- #include <linux/delay.h>
- #include <linux/io.h>
- #include <linux/gpio.h>
- #include <linux/dma-mapping.h>
- #include <linux/regulator/fixed.h>
- #include <linux/regulator/machine.h>
- #include <linux/smsc911x.h>
- #include <linux/spi/spi.h>
- #include <linux/spi/sh_hspi.h>
- #include <linux/mmc/sh_mobile_sdhi.h>
- #include <linux/mfd/tmio.h>
- #include <linux/usb/otg.h>
- #include <linux/usb/ehci_pdriver.h>
- #include <linux/usb/ohci_pdriver.h>
- #include <linux/pm_runtime.h>
- #include <mach/hardware.h>
- #include <mach/r8a7779.h>
- #include <mach/common.h>
- #include <mach/irqs.h>
- #include <asm/mach-types.h>
- #include <asm/mach/arch.h>
- #include <asm/hardware/gic.h>
- #include <asm/traps.h>
- /* Fixed 3.3V regulator to be used by SDHI0 */
- static struct regulator_consumer_supply fixed3v3_power_consumers[] = {
- REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
- REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
- };
- /* Dummy supplies, where voltage doesn't matter */
- static struct regulator_consumer_supply dummy_supplies[] = {
- REGULATOR_SUPPLY("vddvario", "smsc911x"),
- REGULATOR_SUPPLY("vdd33a", "smsc911x"),
- };
- /* SMSC LAN89218 */
- static struct resource smsc911x_resources[] = {
- [0] = {
- .start = 0x18000000, /* ExCS0 */
- .end = 0x180000ff, /* A1->A7 */
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = gic_spi(28), /* IRQ 1 */
- .flags = IORESOURCE_IRQ,
- },
- };
- static struct smsc911x_platform_config smsc911x_platdata = {
- .flags = SMSC911X_USE_32BIT, /* 32-bit SW on 16-bit HW bus */
- .phy_interface = PHY_INTERFACE_MODE_MII,
- .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
- .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
- };
- static struct platform_device eth_device = {
- .name = "smsc911x",
- .id = -1,
- .dev = {
- .platform_data = &smsc911x_platdata,
- },
- .resource = smsc911x_resources,
- .num_resources = ARRAY_SIZE(smsc911x_resources),
- };
- static struct resource sdhi0_resources[] = {
- [0] = {
- .name = "sdhi0",
- .start = 0xffe4c000,
- .end = 0xffe4c0ff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = gic_spi(104),
- .flags = IORESOURCE_IRQ,
- },
- };
- static struct sh_mobile_sdhi_info sdhi0_platform_data = {
- .tmio_flags = TMIO_MMC_WRPROTECT_DISABLE | TMIO_MMC_HAS_IDLE_WAIT,
- .tmio_caps = MMC_CAP_SD_HIGHSPEED,
- };
- static struct platform_device sdhi0_device = {
- .name = "sh_mobile_sdhi",
- .num_resources = ARRAY_SIZE(sdhi0_resources),
- .resource = sdhi0_resources,
- .id = 0,
- .dev = {
- .platform_data = &sdhi0_platform_data,
- }
- };
- /* Thermal */
- static struct resource thermal_resources[] = {
- [0] = {
- .start = 0xFFC48000,
- .end = 0xFFC48038 - 1,
- .flags = IORESOURCE_MEM,
- },
- };
- static struct platform_device thermal_device = {
- .name = "rcar_thermal",
- .resource = thermal_resources,
- .num_resources = ARRAY_SIZE(thermal_resources),
- };
- /* HSPI */
- static struct resource hspi_resources[] = {
- [0] = {
- .start = 0xFFFC7000,
- .end = 0xFFFC7018 - 1,
- .flags = IORESOURCE_MEM,
- },
- };
- static struct platform_device hspi_device = {
- .name = "sh-hspi",
- .id = 0,
- .resource = hspi_resources,
- .num_resources = ARRAY_SIZE(hspi_resources),
- };
- /* USB PHY */
- static struct resource usb_phy_resources[] = {
- [0] = {
- .start = 0xffe70000,
- .end = 0xffe70900 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = 0xfff70000,
- .end = 0xfff70900 - 1,
- .flags = IORESOURCE_MEM,
- },
- };
- static struct platform_device usb_phy_device = {
- .name = "rcar_usb_phy",
- .resource = usb_phy_resources,
- .num_resources = ARRAY_SIZE(usb_phy_resources),
- };
- static struct platform_device *marzen_devices[] __initdata = {
- ð_device,
- &sdhi0_device,
- &thermal_device,
- &hspi_device,
- &usb_phy_device,
- };
- /* USB */
- static struct usb_phy *phy;
- static int usb_power_on(struct platform_device *pdev)
- {
- if (!phy)
- return -EIO;
- pm_runtime_enable(&pdev->dev);
- pm_runtime_get_sync(&pdev->dev);
- usb_phy_init(phy);
- return 0;
- }
- static void usb_power_off(struct platform_device *pdev)
- {
- if (!phy)
- return;
- usb_phy_shutdown(phy);
- pm_runtime_put_sync(&pdev->dev);
- pm_runtime_disable(&pdev->dev);
- }
- static struct usb_ehci_pdata ehcix_pdata = {
- .power_on = usb_power_on,
- .power_off = usb_power_off,
- .power_suspend = usb_power_off,
- };
- static struct resource ehci0_resources[] = {
- [0] = {
- .start = 0xffe70000,
- .end = 0xffe70400 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = gic_spi(44),
- .flags = IORESOURCE_IRQ,
- },
- };
- static struct platform_device ehci0_device = {
- .name = "ehci-platform",
- .id = 0,
- .dev = {
- .dma_mask = &ehci0_device.dev.coherent_dma_mask,
- .coherent_dma_mask = 0xffffffff,
- .platform_data = &ehcix_pdata,
- },
- .num_resources = ARRAY_SIZE(ehci0_resources),
- .resource = ehci0_resources,
|