123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333 |
- /*
- * TI DA850/OMAP-L138 EVM board
- *
- * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/
- *
- * Derived from: arch/arm/mach-davinci/board-da830-evm.c
- * Original Copyrights follow:
- *
- * 2007, 2009 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
- #include <linux/console.h>
- #include <linux/delay.h>
- #include <linux/gpio.h>
- #include <linux/gpio_keys.h>
- #include <linux/init.h>
- #include <linux/kernel.h>
- #include <linux/i2c.h>
- #include <linux/i2c/at24.h>
- #include <linux/i2c/pca953x.h>
- #include <linux/input.h>
- #include <linux/input/tps6507x-ts.h>
- #include <linux/mfd/tps6507x.h>
- #include <linux/mtd/mtd.h>
- #include <linux/mtd/nand.h>
- #include <linux/mtd/partitions.h>
- #include <linux/mtd/physmap.h>
- #include <linux/platform_device.h>
- #include <linux/platform_data/mtd-davinci.h>
- #include <linux/platform_data/mtd-davinci-aemif.h>
- #include <linux/platform_data/spi-davinci.h>
- #include <linux/platform_data/uio_pruss.h>
- #include <linux/regulator/machine.h>
- #include <linux/regulator/tps6507x.h>
- #include <linux/spi/spi.h>
- #include <linux/spi/flash.h>
- #include <linux/wl12xx.h>
- #include <mach/cp_intc.h>
- #include <mach/da8xx.h>
- #include <mach/mux.h>
- #include <mach/sram.h>
- #include <asm/mach-types.h>
- #include <asm/mach/arch.h>
- #include <asm/system_info.h>
- #include <media/tvp514x.h>
- #include <media/adv7343.h>
- #define DA850_EVM_PHY_ID "davinci_mdio-0:00"
- #define DA850_LCD_PWR_PIN GPIO_TO_PIN(2, 8)
- #define DA850_LCD_BL_PIN GPIO_TO_PIN(2, 15)
- #define DA850_MMCSD_CD_PIN GPIO_TO_PIN(4, 0)
- #define DA850_MMCSD_WP_PIN GPIO_TO_PIN(4, 1)
- #define DA850_WLAN_EN GPIO_TO_PIN(6, 9)
- #define DA850_WLAN_IRQ GPIO_TO_PIN(6, 10)
- #define DA850_MII_MDIO_CLKEN_PIN GPIO_TO_PIN(2, 6)
- static struct mtd_partition da850evm_spiflash_part[] = {
- [0] = {
- .name = "UBL",
- .offset = 0,
- .size = SZ_64K,
- .mask_flags = MTD_WRITEABLE,
- },
- [1] = {
- .name = "U-Boot",
- .offset = MTDPART_OFS_APPEND,
- .size = SZ_512K,
- .mask_flags = MTD_WRITEABLE,
- },
- [2] = {
- .name = "U-Boot-Env",
- .offset = MTDPART_OFS_APPEND,
- .size = SZ_64K,
- .mask_flags = MTD_WRITEABLE,
- },
- [3] = {
- .name = "Kernel",
- .offset = MTDPART_OFS_APPEND,
- .size = SZ_2M + SZ_512K,
- .mask_flags = 0,
- },
- [4] = {
- .name = "Filesystem",
- .offset = MTDPART_OFS_APPEND,
- .size = SZ_4M,
- .mask_flags = 0,
- },
- [5] = {
- .name = "MAC-Address",
- .offset = SZ_8M - SZ_64K,
- .size = SZ_64K,
- .mask_flags = MTD_WRITEABLE,
- },
- };
- static struct flash_platform_data da850evm_spiflash_data = {
- .name = "m25p80",
- .parts = da850evm_spiflash_part,
- .nr_parts = ARRAY_SIZE(da850evm_spiflash_part),
- .type = "m25p64",
- };
- static struct davinci_spi_config da850evm_spiflash_cfg = {
- .io_type = SPI_IO_TYPE_DMA,
- .c2tdelay = 8,
- .t2cdelay = 8,
- };
- static struct spi_board_info da850evm_spi_info[] = {
- {
- .modalias = "m25p80",
- .platform_data = &da850evm_spiflash_data,
- .controller_data = &da850evm_spiflash_cfg,
- .mode = SPI_MODE_0,
- .max_speed_hz = 30000000,
- .bus_num = 1,
- .chip_select = 0,
- },
- };
- #ifdef CONFIG_MTD
- static void da850_evm_m25p80_notify_add(struct mtd_info *mtd)
- {
- char *mac_addr = davinci_soc_info.emac_pdata->mac_addr;
- size_t retlen;
- if (!strcmp(mtd->name, "MAC-Address")) {
- mtd_read(mtd, 0, ETH_ALEN, &retlen, mac_addr);
- if (retlen == ETH_ALEN)
- pr_info("Read MAC addr from SPI Flash: %pM\n",
- mac_addr);
- }
- }
- static struct mtd_notifier da850evm_spi_notifier = {
- .add = da850_evm_m25p80_notify_add,
- };
- static void da850_evm_setup_mac_addr(void)
- {
- register_mtd_user(&da850evm_spi_notifier);
- }
- #else
- static void da850_evm_setup_mac_addr(void) { }
- #endif
- static struct mtd_partition da850_evm_norflash_partition[] = {
- {
- .name = "bootloaders + env",
- .offset = 0,
- .size = SZ_512K,
- .mask_flags = MTD_WRITEABLE,
- },
- {
- .name = "kernel",
- .offset = MTDPART_OFS_APPEND,
- .size = SZ_2M,
- .mask_flags = 0,
- },
- {
- .name = "filesystem",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- .mask_flags = 0,
- },
- };
- static struct physmap_flash_data da850_evm_norflash_data = {
- .width = 2,
- .parts = da850_evm_norflash_partition,
- .nr_parts = ARRAY_SIZE(da850_evm_norflash_partition),
- };
- static struct resource da850_evm_norflash_resource[] = {
- {
- .start = DA8XX_AEMIF_CS2_BASE,
- .end = DA8XX_AEMIF_CS2_BASE + SZ_32M - 1,
- .flags = IORESOURCE_MEM,
- },
- };
- static struct platform_device da850_evm_norflash_device = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &da850_evm_norflash_data,
- },
- .num_resources = 1,
- .resource = da850_evm_norflash_resource,
- };
- static struct davinci_pm_config da850_pm_pdata = {
- .sleepcount = 128,
- };
- static struct platform_device da850_pm_device = {
- .name = "pm-davinci",
- .dev = {
- .platform_data = &da850_pm_pdata,
- },
- .id = -1,
- };
- /* DA850/OMAP-L138 EVM includes a 512 MByte large-page NAND flash
- * (128K blocks). It may be used instead of the (default) SPI flash
- * to boot, using TI's tools to install the secondary boot loader
- * (UBL) and U-Boot.
- */
- static struct mtd_partition da850_evm_nandflash_partition[] = {
- {
- .name = "u-boot env",
- .offset = 0,
- .size = SZ_128K,
- .mask_flags = MTD_WRITEABLE,
- },
- {
- .name = "UBL",
- .offset = MTDPART_OFS_APPEND,
- .size = SZ_128K,
- .mask_flags = MTD_WRITEABLE,
- },
- {
- .name = "u-boot",
- .offset = MTDPART_OFS_APPEND,
- .size = 4 * SZ_128K,
- .mask_flags = MTD_WRITEABLE,
- },
- {
- .name = "kernel",
- .offset = 0x200000,
- .size = SZ_2M,
- .mask_flags = 0,
- },
- {
- .name = "filesystem",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- .mask_flags = 0,
- },
- };
- static struct davinci_aemif_timing da850_evm_nandflash_timing = {
- .wsetup = 24,
- .wstrobe = 21,
- .whold = 14,
- .rsetup = 19,
- .rstrobe = 50,
- .rhold = 0,
- .ta = 20,
- };
- static struct davinci_nand_pdata da850_evm_nandflash_data = {
- .parts = da850_evm_nandflash_partition,
- .nr_parts = ARRAY_SIZE(da850_evm_nandflash_partition),
- .ecc_mode = NAND_ECC_HW,
- .ecc_bits = 4,
- .bbt_options = NAND_BBT_USE_FLASH,
- .timing = &da850_evm_nandflash_timing,
- };
- static struct resource da850_evm_nandflash_resource[] = {
- {
- .start = DA8XX_AEMIF_CS3_BASE,
- .end = DA8XX_AEMIF_CS3_BASE + SZ_512K + 2 * SZ_1K - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = DA8XX_AEMIF_CTL_BASE,
- .end = DA8XX_AEMIF_CTL_BASE + SZ_32K - 1,
- .flags = IORESOURCE_MEM,
- },
- };
- static struct platform_device da850_evm_nandflash_device = {
- .name = "davinci_nand",
- .id = 1,
- .dev = {
- .platform_data = &da850_evm_nandflash_data,
- },
- .num_resources = ARRAY_SIZE(da850_evm_nandflash_resource),
- .resource = da850_evm_nandflash_resource,
- };
- static struct platform_device *da850_evm_devices[] = {
- &da850_evm_nandflash_device,
- &da850_evm_norflash_device,
- };
- #define DA8XX_AEMIF_CE2CFG_OFFSET 0x10
- #define DA8XX_AEMIF_ASIZE_16BIT 0x1
- static void __init da850_evm_init_nor(void)
- {
- void __iomem *aemif_addr;
- aemif_addr = ioremap(DA8XX_AEMIF_CTL_BASE, SZ_32K);
- /* Configure data bus width of CS2 to 16 bit */
- writel(readl(aemif_addr + DA8XX_AEMIF_CE2CFG_OFFSET) |
- DA8XX_AEMIF_ASIZE_16BIT,
- aemif_addr + DA8XX_AEMIF_CE2CFG_OFFSET);
- iounmap(aemif_addr);
- }
- static const short da850_evm_nand_pins[] = {
- DA850_EMA_D_0, DA850_EMA_D_1, DA850_EMA_D_2, DA850_EMA_D_3,
- DA850_EMA_D_4, DA850_EMA_D_5, DA850_EMA_D_6, DA850_EMA_D_7,
- DA850_EMA_A_1, DA850_EMA_A_2, DA850_NEMA_CS_3, DA850_NEMA_CS_4,
- DA850_NEMA_WE, DA850_NEMA_OE,
- -1
- };
- static const short da850_evm_nor_pins[] = {
- DA850_EMA_BA_1, DA850_EMA_CLK, DA850_EMA_WAIT_1, DA850_NEMA_CS_2,
- DA850_NEMA_WE, DA850_NEMA_OE, DA850_EMA_D_0, DA850_EMA_D_1,
- DA850_EMA_D_2, DA850_EMA_D_3, DA850_EMA_D_4, DA850_EMA_D_5,
- DA850_EMA_D_6, DA850_EMA_D_7, DA850_EMA_D_8, DA850_EMA_D_9,
- DA850_EMA_D_10, DA850_EMA_D_11, DA850_EMA_D_12, DA850_EMA_D_13,
- DA850_EMA_D_14, DA850_EMA_D_15, DA850_EMA_A_0, DA850_EMA_A_1,
- DA850_EMA_A_2, DA850_EMA_A_3, DA850_EMA_A_4, DA850_EMA_A_5,
- DA850_EMA_A_6, DA850_EMA_A_7, DA850_EMA_A_8, DA850_EMA_A_9,
- DA850_EMA_A_10, DA850_EMA_A_11, DA850_EMA_A_12, DA850_EMA_A_13,
- DA850_EMA_A_14, DA850_EMA_A_15, DA850_EMA_A_16, DA850_EMA_A_17,
- DA850_EMA_A_18, DA850_EMA_A_19, DA850_EMA_A_20, DA850_EMA_A_21,
|