aiot/efHeterogeneousSynchronization/dataSharedMemory/temperatureMemoryDefinition.h

#ifndef __ALPHA_LCA__H__
#define __ALPHA_LCA__H__

#include <asm/compiler.h>
#include <asm/mce.h>

/*
 * Low Cost Alpha (LCA) definitions (these apply to 21066 and 21068,
 * for example).
 *
 * This file is based on:
 *
 *	DECchip 21066 and DECchip 21068 Alpha AXP Microprocessors
 *	Hardware Reference Manual; Digital Equipment Corp.; May 1994;
 *	Maynard, MA; Order Number: EC-N2681-71.
 */

/*
 * NOTE: The LCA uses a Host Address Extension (HAE) register to access
 *	 PCI addresses that are beyond the first 27 bits of address
 *	 space.  Updating the HAE requires an external cycle (and
 *	 a memory barrier), which tends to be slow.  Instead of updating
 *	 it on each sparse memory access, we keep the current HAE value
 *	 cached in variable cache_hae.  Only if the cached HAE differs
 *	 from the desired HAE value do we actually updated HAE register.
 *	 The HAE register is preserved by the interrupt handler entry/exit
 *	 code, so this scheme works even in the presence of interrupts.
 *
 * Dense memory space doesn't require the HAE, but is restricted to
 * aligned 32 and 64 bit accesses.  Special Cycle and Interrupt
 * Acknowledge cycles may also require the use of the HAE.  The LCA
 * limits I/O address space to the bottom 24 bits of address space,
 * but this easily covers the 16 bit ISA I/O address space.
 */

/*
 * NOTE 2! The memory operations do not set any memory barriers, as
 * it's not needed for cases like a frame buffer that is essentially
 * memory-like.  You need to do them by hand if the operations depend
 * on ordering.
 *
 * Similarly, the port I/O operations do a "mb" only after a write
 * operation: if an mb is needed before (as in the case of doing
 * memory mapped I/O first, and then a port I/O operation to the same
 * device), it needs to be done by hand.
 *
 * After the above has bitten me 100 times, I'll give up and just do
 * the mb all the time, but right now I'm hoping this will work out.
 * Avoiding mb's may potentially be a noticeable speed improvement,
 * but I can't honestly say I've tested it.
 *
 * Handling interrupts that need to do mb's to synchronize to
 * non-interrupts is another fun race area.  Don't do it (because if
 * you do, I'll have to do *everything* with interrupts disabled,
 * ugh).
 */

/*
 * Memory Controller registers:
 */
#define LCA_MEM_BCR0		(IDENT_ADDR + 0x120000000UL)
#define LCA_MEM_BCR1		(IDENT_ADDR + 0x120000008UL)
#define LCA_MEM_BCR2		(IDENT_ADDR + 0x120000010UL)
#define LCA_MEM_BCR3		(IDENT_ADDR + 0x120000018UL)
#define LCA_MEM_BMR0		(IDENT_ADDR + 0x120000020UL)
#define LCA_MEM_BMR1		(IDENT_ADDR + 0x120000028UL)
#define LCA_MEM_BMR2		(IDENT_ADDR + 0x120000030UL)
#define LCA_MEM_BMR3		(IDENT_ADDR + 0x120000038UL)
#define LCA_MEM_BTR0		(IDENT_ADDR + 0x120000040UL)
#define LCA_MEM_BTR1		(IDENT_ADDR + 0x120000048UL)
#define LCA_MEM_BTR2		(IDENT_ADDR + 0x120000050UL)
#define LCA_MEM_BTR3		(IDENT_ADDR + 0x120000058UL)
#define LCA_MEM_GTR		(IDENT_ADDR + 0x120000060UL)
#define LCA_MEM_ESR		(IDENT_ADDR + 0x120000068UL)
#define LCA_MEM_EAR		(IDENT_ADDR + 0x120000070UL)
#define LCA_MEM_CAR		(IDENT_ADDR + 0x120000078UL)
#define LCA_MEM_VGR		(IDENT_ADDR + 0x120000080UL)
#define LCA_MEM_PLM		(IDENT_ADDR + 0x120000088UL)
#define LCA_MEM_FOR		(IDENT_ADDR + 0x120000090UL)

/*
 * I/O Controller registers:
 */
#define LCA_IOC_HAE		(IDENT_ADDR + 0x180000000UL)
#define LCA_IOC_CONF		(IDENT_ADDR + 0x180000020UL)
#define LCA_IOC_STAT0		(IDENT_ADDR + 0x180000040UL)
#define LCA_IOC_STAT1		(IDENT_ADDR + 0x180000060UL)
#define LCA_IOC_TBIA		(IDENT_ADDR + 0x180000080UL)
#define LCA_IOC_TB_ENA		(IDENT_ADDR + 0x1800000a0UL)
#define LCA_IOC_SFT_RST		(IDENT_ADDR + 0x1800000c0UL)
#define LCA_IOC_PAR_DIS		(IDENT_ADDR + 0x1800000e0UL)
#define LCA_IOC_W_BASE0		(IDENT_ADDR + 0x180000100UL)
#define LCA_IOC_W_BASE1		(IDENT_ADDR + 0x180000120UL)
#define LCA_IOC_W_MASK0		(IDENT_ADDR + 0x180000140UL)
#define LCA_IOC_W_MASK1		(IDENT_ADDR + 0x180000160UL)
#define LCA_IOC_T_BASE0		(IDENT_ADDR + 0x180000180UL)
#define LCA_IOC_T_BASE1		(IDENT_ADDR + 0x1800001a0UL)
#define LCA_IOC_TB_TAG0		(IDENT_ADDR + 0x188000000UL)
#define LCA_IOC_TB_TAG1		(IDENT_ADDR + 0x188000020UL)
#define LCA_IOC_TB_TAG2		(IDENT_ADDR + 0x188000040UL)
#define LCA_IOC_TB_TAG3		(IDENT_ADDR + 0x188000060UL)
#define LCA_IOC_TB_TAG4		(IDENT_ADDR + 0x188000070UL)
#define LCA_IOC_TB_TAG5		(IDENT_ADDR + 0x1880000a0UL)
#define LCA_IOC_TB_TAG6		(IDENT_ADDR + 0x1880000c0UL)
#define LCA_IOC_TB_TAG7		(IDENT_ADDR + 0x1880000e0UL)

/*
 * Memory spaces:
 */
#define LCA_IACK_SC		(IDENT_ADDR + 0x1a0000000UL)
#define LCA_CONF		(IDENT_ADDR + 0x1e0000000UL)
#define LCA_IO			(IDENT_ADDR + 0x1c0000000UL)
#define LCA_SPARSE_MEM		(IDENT_ADDR + 0x200000000UL)
#define LCA_DENSE_MEM		(IDENT_ADDR + 0x300000000UL)

/*
 * Bit definitions for I/O Controller status register 0:
 */
#define LCA_IOC_STAT0_CMD		0xf
#define LCA_IOC_STAT0_ERR		(1<<4)
#define LCA_IOC_STAT0_LOST		(1<<5)
#define LCA_IOC_STAT0_THIT		(1<<6)
#define LCA_IOC_STAT0_TREF		(1<<7)
#define LCA_IOC_STAT0_CODE_SHIFT	8
#define LCA_IOC_STAT0_CODE_MASK		0x7
#define LCA_IOC_STAT0_P_NBR_SHIFT	13
#define LCA_IOC_STAT0_P_NBR_MASK	0x7ffff

#define LCA_HAE_ADDRESS		LCA_IOC_HAE

/* LCA PMR Power Management register defines */
#define LCA_PMR_ADDR	(IDENT_ADDR + 0x120000098UL)
#define LCA_PMR_PDIV    0x7                     /* Primary clock divisor */
#define LCA_PMR_ODIV    0x38                    /* Override clock divisor */
#define LCA_PMR_INTO    0x40                    /* Interrupt override */
#define LCA_PMR_DMAO    0x80                    /* DMA override */
#define LCA_PMR_OCCEB   0xffff0000L             /* Override cycle counter - even bits */
#define LCA_PMR_OCCOB   0xffff000000000000L     /* Override cycle counter - even bits */
#define LCA_PMR_PRIMARY_MASK    0xfffffffffffffff8L

/* LCA PMR Macros */

#define LCA_READ_PMR        (*(volatile unsigned long *)LCA_PMR_ADDR)
#define LCA_WRITE_PMR(d)    (*((volatile unsigned long *)LCA_PMR_ADDR) = (d))

#define LCA_GET_PRIMARY(r)  ((r) & LCA_PMR_PDIV)
#define LCA_GET_OVERRIDE(r) (((r) >> 3) & LCA_PMR_PDIV)
#define LCA_SET_PRIMARY_CLOCK(r, c) ((r) = (((r) & LCA_PMR_PRIMARY_MASK)|(c)))

/* LCA PMR Divisor values */
#define LCA_PMR_DIV_1   0x0
#define LCA_PMR_DIV_1_5 0x1
#define LCA_PMR_DIV_2   0x2
#define LCA_PMR_DIV_4   0x3
#define LCA_PMR_DIV_8   0x4
#define LCA_PMR_DIV_16  0x5
#define LCA_PMR_DIV_MIN DIV_1
#define LCA_PMR_DIV_MAX DIV_16


/*
 * Data structure for handling LCA machine checks.  Correctable errors
 * result in a short logout frame, uncorrectable ones in a long one.
 */
struct el_lca_mcheck_short {
	struct el_common	h;		/* common logout header */
	unsigned long		esr;		/* error-status register */
	unsigned long		ear;		/* error-address register */
	unsigned long		dc_stat;	/* dcache status register */
	unsigned long		ioc_stat0;	/* I/O controller status register 0 */
	unsigned long		ioc_stat1;	/* I/O controller status register 1 */
};

struct el_lca_mcheck_long {
	struct el_common	h;		/* common logout header */
	unsigned long		pt[31];		/* PAL temps */