| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416 | /* * arch/arm/mach-at91/at91sam9263_devices.c * *  Copyright (C) 2007 Atmel Corporation. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * */#include <asm/mach/arch.h>#include <asm/mach/map.h>#include <linux/dma-mapping.h>#include <linux/gpio.h>#include <linux/platform_device.h>#include <linux/i2c-gpio.h>#include <linux/fb.h>#include <video/atmel_lcdc.h>#include <mach/at91sam9263.h>#include <mach/at91sam9263_matrix.h>#include <mach/at91_matrix.h>#include <mach/at91sam9_smc.h>#include "board.h"#include "generic.h"/* -------------------------------------------------------------------- *  USB Host * -------------------------------------------------------------------- */#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)static u64 ohci_dmamask = DMA_BIT_MASK(32);static struct at91_usbh_data usbh_data;static struct resource usbh_resources[] = {	[0] = {		.start	= AT91SAM9263_UHP_BASE,		.end	= AT91SAM9263_UHP_BASE + SZ_1M - 1,		.flags	= IORESOURCE_MEM,	},	[1] = {		.start	= NR_IRQS_LEGACY + AT91SAM9263_ID_UHP,		.end	= NR_IRQS_LEGACY + AT91SAM9263_ID_UHP,		.flags	= IORESOURCE_IRQ,	},};static struct platform_device at91_usbh_device = {	.name		= "at91_ohci",	.id		= -1,	.dev		= {				.dma_mask		= &ohci_dmamask,				.coherent_dma_mask	= DMA_BIT_MASK(32),				.platform_data		= &usbh_data,	},	.resource	= usbh_resources,	.num_resources	= ARRAY_SIZE(usbh_resources),};void __init at91_add_device_usbh(struct at91_usbh_data *data){	int i;	if (!data)		return;	/* Enable VBus control for UHP ports */	for (i = 0; i < data->ports; i++) {		if (gpio_is_valid(data->vbus_pin[i]))			at91_set_gpio_output(data->vbus_pin[i],					     data->vbus_pin_active_low[i]);	}	/* Enable overcurrent notification */	for (i = 0; i < data->ports; i++) {		if (gpio_is_valid(data->overcurrent_pin[i]))			at91_set_gpio_input(data->overcurrent_pin[i], 1);	}	usbh_data = *data;	platform_device_register(&at91_usbh_device);}#elsevoid __init at91_add_device_usbh(struct at91_usbh_data *data) {}#endif/* -------------------------------------------------------------------- *  USB Device (Gadget) * -------------------------------------------------------------------- */#if defined(CONFIG_USB_AT91) || defined(CONFIG_USB_AT91_MODULE)static struct at91_udc_data udc_data;static struct resource udc_resources[] = {	[0] = {		.start	= AT91SAM9263_BASE_UDP,		.end	= AT91SAM9263_BASE_UDP + SZ_16K - 1,		.flags	= IORESOURCE_MEM,	},	[1] = {		.start	= NR_IRQS_LEGACY + AT91SAM9263_ID_UDP,		.end	= NR_IRQS_LEGACY + AT91SAM9263_ID_UDP,		.flags	= IORESOURCE_IRQ,	},};static struct platform_device at91_udc_device = {	.name		= "at91_udc",	.id		= -1,	.dev		= {				.platform_data		= &udc_data,	},	.resource	= udc_resources,	.num_resources	= ARRAY_SIZE(udc_resources),};void __init at91_add_device_udc(struct at91_udc_data *data){	if (!data)		return;	if (gpio_is_valid(data->vbus_pin)) {		at91_set_gpio_input(data->vbus_pin, 0);		at91_set_deglitch(data->vbus_pin, 1);	}	/* Pullup pin is handled internally by USB device peripheral */	udc_data = *data;	platform_device_register(&at91_udc_device);}#elsevoid __init at91_add_device_udc(struct at91_udc_data *data) {}#endif/* -------------------------------------------------------------------- *  Ethernet * -------------------------------------------------------------------- */#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)static u64 eth_dmamask = DMA_BIT_MASK(32);static struct macb_platform_data eth_data;static struct resource eth_resources[] = {	[0] = {		.start	= AT91SAM9263_BASE_EMAC,		.end	= AT91SAM9263_BASE_EMAC + SZ_16K - 1,		.flags	= IORESOURCE_MEM,	},	[1] = {		.start	= NR_IRQS_LEGACY + AT91SAM9263_ID_EMAC,		.end	= NR_IRQS_LEGACY + AT91SAM9263_ID_EMAC,		.flags	= IORESOURCE_IRQ,	},};static struct platform_device at91sam9263_eth_device = {	.name		= "macb",	.id		= -1,	.dev		= {				.dma_mask		= ð_dmamask,				.coherent_dma_mask	= DMA_BIT_MASK(32),				.platform_data		= ð_data,	},	.resource	= eth_resources,	.num_resources	= ARRAY_SIZE(eth_resources),};void __init at91_add_device_eth(struct macb_platform_data *data){	if (!data)		return;	if (gpio_is_valid(data->phy_irq_pin)) {		at91_set_gpio_input(data->phy_irq_pin, 0);		at91_set_deglitch(data->phy_irq_pin, 1);	}	/* Pins used for MII and RMII */	at91_set_A_periph(AT91_PIN_PE21, 0);	/* ETXCK_EREFCK */	at91_set_B_periph(AT91_PIN_PC25, 0);	/* ERXDV */	at91_set_A_periph(AT91_PIN_PE25, 0);	/* ERX0 */	at91_set_A_periph(AT91_PIN_PE26, 0);	/* ERX1 */	at91_set_A_periph(AT91_PIN_PE27, 0);	/* ERXER */	at91_set_A_periph(AT91_PIN_PE28, 0);	/* ETXEN */	at91_set_A_periph(AT91_PIN_PE23, 0);	/* ETX0 */	at91_set_A_periph(AT91_PIN_PE24, 0);	/* ETX1 */	at91_set_A_periph(AT91_PIN_PE30, 0);	/* EMDIO */	at91_set_A_periph(AT91_PIN_PE29, 0);	/* EMDC */	if (!data->is_rmii) {		at91_set_A_periph(AT91_PIN_PE22, 0);	/* ECRS */		at91_set_B_periph(AT91_PIN_PC26, 0);	/* ECOL */		at91_set_B_periph(AT91_PIN_PC22, 0);	/* ERX2 */		at91_set_B_periph(AT91_PIN_PC23, 0);	/* ERX3 */		at91_set_B_periph(AT91_PIN_PC27, 0);	/* ERXCK */		at91_set_B_periph(AT91_PIN_PC20, 0);	/* ETX2 */		at91_set_B_periph(AT91_PIN_PC21, 0);	/* ETX3 */		at91_set_B_periph(AT91_PIN_PC24, 0);	/* ETXER */	}	eth_data = *data;	platform_device_register(&at91sam9263_eth_device);}#elsevoid __init at91_add_device_eth(struct macb_platform_data *data) {}#endif/* -------------------------------------------------------------------- *  MMC / SD * -------------------------------------------------------------------- */#if IS_ENABLED(CONFIG_MMC_ATMELMCI)static u64 mmc_dmamask = DMA_BIT_MASK(32);static struct mci_platform_data mmc0_data, mmc1_data;static struct resource mmc0_resources[] = {	[0] = {		.start	= AT91SAM9263_BASE_MCI0,		.end	= AT91SAM9263_BASE_MCI0 + SZ_16K - 1,		.flags	= IORESOURCE_MEM,	},	[1] = {		.start	= NR_IRQS_LEGACY + AT91SAM9263_ID_MCI0,		.end	= NR_IRQS_LEGACY + AT91SAM9263_ID_MCI0,		.flags	= IORESOURCE_IRQ,	},};static struct platform_device at91sam9263_mmc0_device = {	.name		= "atmel_mci",	.id		= 0,	.dev		= {				.dma_mask		= &mmc_dmamask,				.coherent_dma_mask	= DMA_BIT_MASK(32),				.platform_data		= &mmc0_data,	},	.resource	= mmc0_resources,	.num_resources	= ARRAY_SIZE(mmc0_resources),};static struct resource mmc1_resources[] = {	[0] = {		.start	= AT91SAM9263_BASE_MCI1,		.end	= AT91SAM9263_BASE_MCI1 + SZ_16K - 1,		.flags	= IORESOURCE_MEM,	},	[1] = {		.start	= NR_IRQS_LEGACY + AT91SAM9263_ID_MCI1,		.end	= NR_IRQS_LEGACY + AT91SAM9263_ID_MCI1,		.flags	= IORESOURCE_IRQ,	},};static struct platform_device at91sam9263_mmc1_device = {	.name		= "atmel_mci",	.id		= 1,	.dev		= {				.dma_mask		= &mmc_dmamask,				.coherent_dma_mask	= DMA_BIT_MASK(32),				.platform_data		= &mmc1_data,	},	.resource	= mmc1_resources,	.num_resources	= ARRAY_SIZE(mmc1_resources),};void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data){	unsigned int i;	unsigned int slot_count = 0;	if (!data)		return;	for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) {		if (!data->slot[i].bus_width)			continue;		/* input/irq */		if (gpio_is_valid(data->slot[i].detect_pin)) {			at91_set_gpio_input(data->slot[i].detect_pin,					1);			at91_set_deglitch(data->slot[i].detect_pin,					1);		}		if (gpio_is_valid(data->slot[i].wp_pin))			at91_set_gpio_input(data->slot[i].wp_pin, 1);		if (mmc_id == 0) {				/* MCI0 */			switch (i) {			case 0:					/* slot A */				/* CMD */				at91_set_A_periph(AT91_PIN_PA1, 1);				/* DAT0, maybe DAT1..DAT3 */				at91_set_A_periph(AT91_PIN_PA0, 1);				if (data->slot[i].bus_width == 4) {					at91_set_A_periph(AT91_PIN_PA3, 1);					at91_set_A_periph(AT91_PIN_PA4, 1);					at91_set_A_periph(AT91_PIN_PA5, 1);				}				slot_count++;				break;			case 1:					/* slot B */				/* CMD */				at91_set_A_periph(AT91_PIN_PA16, 1);				/* DAT0, maybe DAT1..DAT3 */				at91_set_A_periph(AT91_PIN_PA17, 1);				if (data->slot[i].bus_width == 4) {					at91_set_A_periph(AT91_PIN_PA18, 1);					at91_set_A_periph(AT91_PIN_PA19, 1);					at91_set_A_periph(AT91_PIN_PA20, 1);				}				slot_count++;				break;			default:				printk(KERN_ERR				       "AT91: SD/MMC slot %d not available\n", i);				break;			}			if (slot_count) {				/* CLK */				at91_set_A_periph(AT91_PIN_PA12, 0);				mmc0_data = *data;				platform_device_register(&at91sam9263_mmc0_device);			}		} else if (mmc_id == 1) {			/* MCI1 */			switch (i) {			case 0:					/* slot A */				/* CMD */				at91_set_A_periph(AT91_PIN_PA7, 1);				/* DAT0, maybe DAT1..DAT3 */				at91_set_A_periph(AT91_PIN_PA8, 1);				if (data->slot[i].bus_width == 4) {					at91_set_A_periph(AT91_PIN_PA9, 1);					at91_set_A_periph(AT91_PIN_PA10, 1);					at91_set_A_periph(AT91_PIN_PA11, 1);				}				slot_count++;				break;			case 1:					/* slot B */				/* CMD */				at91_set_A_periph(AT91_PIN_PA21, 1);				/* DAT0, maybe DAT1..DAT3 */				at91_set_A_periph(AT91_PIN_PA22, 1);				if (data->slot[i].bus_width == 4) {					at91_set_A_periph(AT91_PIN_PA23, 1);					at91_set_A_periph(AT91_PIN_PA24, 1);					at91_set_A_periph(AT91_PIN_PA25, 1);				}				slot_count++;				break;			default:				printk(KERN_ERR				       "AT91: SD/MMC slot %d not available\n", i);				break;			}			if (slot_count) {				/* CLK */				at91_set_A_periph(AT91_PIN_PA6, 0);				mmc1_data = *data;				platform_device_register(&at91sam9263_mmc1_device);			}		}	}}#elsevoid __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) {}#endif/* -------------------------------------------------------------------- *  Compact Flash (PCMCIA or IDE) * -------------------------------------------------------------------- */#if defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE) || \	defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE)static struct at91_cf_data cf0_data;static struct resource cf0_resources[] = {	[0] = {		.start	= AT91_CHIPSELECT_4,		.end	= AT91_CHIPSELECT_4 + SZ_256M - 1,		.flags	= IORESOURCE_MEM | IORESOURCE_MEM_8AND16BIT,	}};static struct platform_device cf0_device = {	.id		= 0,	.dev		= {				.platform_data	= &cf0_data,	},	.resource	= cf0_resources,	.num_resources	= ARRAY_SIZE(cf0_resources),};static struct at91_cf_data cf1_data;static struct resource cf1_resources[] = {	[0] = {		.start	= AT91_CHIPSELECT_5,		.end	= AT91_CHIPSELECT_5 + SZ_256M - 1,		.flags	= IORESOURCE_MEM | IORESOURCE_MEM_8AND16BIT,	}};
 |