aiot/waterDataPreprocessing/monitoringDataProcessing/connectTheSignalSlot.h

/*
 * Analog Devices SPI3 controller driver
 *
 * Copyright (c) 2011 Analog Devices Inc.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */

#ifndef _SPI_CHANNEL_H_
#define _SPI_CHANNEL_H_

#include <linux/types.h>

/* SPI_CONTROL */
#define SPI_CTL_EN                  0x00000001    /* Enable */
#define SPI_CTL_MSTR                0x00000002    /* Master/Slave */
#define SPI_CTL_PSSE                0x00000004    /* controls modf error in master mode */
#define SPI_CTL_ODM                 0x00000008    /* Open Drain Mode */
#define SPI_CTL_CPHA                0x00000010    /* Clock Phase */
#define SPI_CTL_CPOL                0x00000020    /* Clock Polarity */
#define SPI_CTL_ASSEL               0x00000040    /* Slave Select Pin Control */
#define SPI_CTL_SELST               0x00000080    /* Slave Select Polarity in-between transfers */
#define SPI_CTL_EMISO               0x00000100    /* Enable MISO */
#define SPI_CTL_SIZE                0x00000600    /* Word Transfer Size */
#define SPI_CTL_SIZE08              0x00000000    /* SIZE: 8 bits */
#define SPI_CTL_SIZE16              0x00000200    /* SIZE: 16 bits */
#define SPI_CTL_SIZE32              0x00000400    /* SIZE: 32 bits */
#define SPI_CTL_LSBF                0x00001000    /* LSB First */
#define SPI_CTL_FCEN                0x00002000    /* Flow-Control Enable */
#define SPI_CTL_FCCH                0x00004000    /* Flow-Control Channel Selection */
#define SPI_CTL_FCPL                0x00008000    /* Flow-Control Polarity */
#define SPI_CTL_FCWM                0x00030000    /* Flow-Control Water-Mark */
#define SPI_CTL_FIFO0               0x00000000    /* FCWM: TFIFO empty or RFIFO Full */
#define SPI_CTL_FIFO1               0x00010000    /* FCWM: TFIFO 75% or more empty or RFIFO 75% or more full */
#define SPI_CTL_FIFO2               0x00020000    /* FCWM: TFIFO 50% or more empty or RFIFO 50% or more full */
#define SPI_CTL_FMODE               0x00040000    /* Fast-mode Enable */
#define SPI_CTL_MIOM                0x00300000    /* Multiple I/O Mode */
#define SPI_CTL_MIO_DIS             0x00000000    /* MIOM: Disable */
#define SPI_CTL_MIO_DUAL            0x00100000    /* MIOM: Enable DIOM (Dual I/O Mode) */
#define SPI_CTL_MIO_QUAD            0x00200000    /* MIOM: Enable QUAD (Quad SPI Mode) */
#define SPI_CTL_SOSI                0x00400000    /* Start on MOSI */
/* SPI_RX_CONTROL */
#define SPI_RXCTL_REN               0x00000001    /* Receive Channel Enable */
#define SPI_RXCTL_RTI               0x00000004    /* Receive Transfer Initiate */
#define SPI_RXCTL_RWCEN             0x00000008    /* Receive Word Counter Enable */
#define SPI_RXCTL_RDR               0x00000070    /* Receive Data Request */
#define SPI_RXCTL_RDR_DIS           0x00000000    /* RDR: Disabled */
#define SPI_RXCTL_RDR_NE            0x00000010    /* RDR: RFIFO not empty */
#define SPI_RXCTL_RDR_25            0x00000020    /* RDR: RFIFO 25% full */
#define SPI_RXCTL_RDR_50            0x00000030    /* RDR: RFIFO 50% full */
#define SPI_RXCTL_RDR_75            0x00000040    /* RDR: RFIFO 75% full */
#define SPI_RXCTL_RDR_FULL          0x00000050    /* RDR: RFIFO full */
#define SPI_RXCTL_RDO               0x00000100    /* Receive Data Over-Run */
#define SPI_RXCTL_RRWM              0x00003000    /* FIFO Regular Water-Mark */
#define SPI_RXCTL_RWM_0             0x00000000    /* RRWM: RFIFO Empty */
#define SPI_RXCTL_RWM_25            0x00001000    /* RRWM: RFIFO 25% full */
#define SPI_RXCTL_RWM_50            0x00002000    /* RRWM: RFIFO 50% full */
#define SPI_RXCTL_RWM_75            0x00003000    /* RRWM: RFIFO 75% full */
#define SPI_RXCTL_RUWM              0x00070000    /* FIFO Urgent Water-Mark */
#define SPI_RXCTL_UWM_DIS           0x00000000    /* RUWM: Disabled */
#define SPI_RXCTL_UWM_25            0x00010000    /* RUWM: RFIFO 25% full */
#define SPI_RXCTL_UWM_50            0x00020000    /* RUWM: RFIFO 50% full */
#define SPI_RXCTL_UWM_75            0x00030000    /* RUWM: RFIFO 75% full */
#define SPI_RXCTL_UWM_FULL          0x00040000    /* RUWM: RFIFO full */
/* SPI_TX_CONTROL */
#define SPI_TXCTL_TEN               0x00000001    /* Transmit Channel Enable */
#define SPI_TXCTL_TTI               0x00000004    /* Transmit Transfer Initiate */
#define SPI_TXCTL_TWCEN             0x00000008    /* Transmit Word Counter Enable */
#define SPI_TXCTL_TDR               0x00000070    /* Transmit Data Request */
#define SPI_TXCTL_TDR_DIS           0x00000000    /* TDR: Disabled */
#define SPI_TXCTL_TDR_NF            0x00000010    /* TDR: TFIFO not full */
#define SPI_TXCTL_TDR_25            0x00000020    /* TDR: TFIFO 25% empty */
#define SPI_TXCTL_TDR_50            0x00000030    /* TDR: TFIFO 50% empty */
#define SPI_TXCTL_TDR_75            0x00000040    /* TDR: TFIFO 75% empty */
#define SPI_TXCTL_TDR_EMPTY         0x00000050    /* TDR: TFIFO empty */
#define SPI_TXCTL_TDU               0x00000100    /* Transmit Data Under-Run */
#define SPI_TXCTL_TRWM              0x00003000    /* FIFO Regular Water-Mark */
#define SPI_TXCTL_RWM_FULL          0x00000000    /* TRWM: TFIFO full */
#define SPI_TXCTL_RWM_25            0x00001000    /* TRWM: TFIFO 25% empty */
#define SPI_TXCTL_RWM_50            0x00002000    /* TRWM: TFIFO 50% empty */
#define SPI_TXCTL_RWM_75            0x00003000    /* TRWM: TFIFO 75% empty */
#define SPI_TXCTL_TUWM              0x00070000    /* FIFO Urgent Water-Mark */
#define SPI_TXCTL_UWM_DIS           0x00000000    /* TUWM: Disabled */
#define SPI_TXCTL_UWM_25            0x00010000    /* TUWM: TFIFO 25% empty */
#define SPI_TXCTL_UWM_50            0x00020000    /* TUWM: TFIFO 50% empty */
#define SPI_TXCTL_UWM_75            0x00030000    /* TUWM: TFIFO 75% empty */
#define SPI_TXCTL_UWM_EMPTY         0x00040000    /* TUWM: TFIFO empty */
/* SPI_CLOCK */
#define SPI_CLK_BAUD                0x0000FFFF    /* Baud Rate */
/* SPI_DELAY */
#define SPI_DLY_STOP                0x000000FF    /* Transfer delay time in multiples of SCK period */
#define SPI_DLY_LEADX               0x00000100    /* Extended (1 SCK) LEAD Control */
#define SPI_DLY_LAGX                0x00000200    /* Extended (1 SCK) LAG control */
/* SPI_SSEL */
#define SPI_SLVSEL_SSE1             0x00000002    /* SPISSEL1 Enable */
#define SPI_SLVSEL_SSE2             0x00000004    /* SPISSEL2 Enable */
#define SPI_SLVSEL_SSE3             0x00000008    /* SPISSEL3 Enable */
#define SPI_SLVSEL_SSE4             0x00000010    /* SPISSEL4 Enable */
#define SPI_SLVSEL_SSE5             0x00000020    /* SPISSEL5 Enable */
#define SPI_SLVSEL_SSE6             0x00000040    /* SPISSEL6 Enable */
#define SPI_SLVSEL_SSE7             0x00000080    /* SPISSEL7 Enable */
#define SPI_SLVSEL_SSEL1            0x00000200    /* SPISSEL1 Value */
#define SPI_SLVSEL_SSEL2            0x00000400    /* SPISSEL2 Value */
#define SPI_SLVSEL_SSEL3            0x00000800    /* SPISSEL3 Value */
#define SPI_SLVSEL_SSEL4            0x00001000    /* SPISSEL4 Value */
#define SPI_SLVSEL_SSEL5            0x00002000    /* SPISSEL5 Value */
#define SPI_SLVSEL_SSEL6            0x00004000    /* SPISSEL6 Value */
#define SPI_SLVSEL_SSEL7            0x00008000    /* SPISSEL7 Value */
/* SPI_RWC */
#define SPI_RWC_VALUE               0x0000FFFF    /* Received Word-Count */
/* SPI_RWCR */
#define SPI_RWCR_VALUE              0x0000FFFF    /* Received Word-Count Reload */
/* SPI_TWC */
#define SPI_TWC_VALUE               0x0000FFFF    /* Transmitted Word-Count */
/* SPI_TWCR */
#define SPI_TWCR_VALUE              0x0000FFFF    /* Transmitted Word-Count Reload */
/* SPI_IMASK */
#define SPI_IMSK_RUWM               0x00000002    /* Receive Urgent Water-Mark Interrupt Mask */
#define SPI_IMSK_TUWM               0x00000004    /* Transmit Urgent Water-Mark Interrupt Mask */
#define SPI_IMSK_ROM                0x00000010    /* Receive Over-Run Error Interrupt Mask */
#define SPI_IMSK_TUM                0x00000020    /* Transmit Under-Run Error Interrupt Mask */
#define SPI_IMSK_TCM                0x00000040    /* Transmit Collision Error Interrupt Mask */
#define SPI_IMSK_MFM                0x00000080    /* Mode Fault Error Interrupt Mask */
#define SPI_IMSK_RSM                0x00000100    /* Receive Start Interrupt Mask */
#define SPI_IMSK_TSM                0x00000200    /* Transmit Start Interrupt Mask */
#define SPI_IMSK_RFM                0x00000400    /* Receive Finish Interrupt Mask */
#define SPI_IMSK_TFM                0x00000800    /* Transmit Finish Interrupt Mask */
/* SPI_IMASKCL */
#define SPI_IMSK_CLR_RUW            0x00000002    /* Receive Urgent Water-Mark Interrupt Mask */
#define SPI_IMSK_CLR_TUWM           0x00000004    /* Transmit Urgent Water-Mark Interrupt Mask */
#define SPI_IMSK_CLR_ROM            0x00000010    /* Receive Over-Run Error Interrupt Mask */
#define SPI_IMSK_CLR_TUM            0x00000020    /* Transmit Under-Run Error Interrupt Mask */
#define SPI_IMSK_CLR_TCM            0x00000040    /* Transmit Collision Error Interrupt Mask */
#define SPI_IMSK_CLR_MFM            0x00000080    /* Mode Fault Error Interrupt Mask */
#define SPI_IMSK_CLR_RSM            0x00000100    /* Receive Start Interrupt Mask */
#define SPI_IMSK_CLR_TSM            0x00000200    /* Transmit Start Interrupt Mask */
#define SPI_IMSK_CLR_RFM            0x00000400    /* Receive Finish Interrupt Mask */
#define SPI_IMSK_CLR_TFM            0x00000800    /* Transmit Finish Interrupt Mask */
/* SPI_IMASKST */
#define SPI_IMSK_SET_RUWM           0x00000002    /* Receive Urgent Water-Mark Interrupt Mask */
#define SPI_IMSK_SET_TUWM           0x00000004    /* Transmit Urgent Water-Mark Interrupt Mask */
#define SPI_IMSK_SET_ROM            0x00000010    /* Receive Over-Run Error Interrupt Mask */
#define SPI_IMSK_SET_TUM            0x00000020    /* Transmit Under-Run Error Interrupt Mask */
#define SPI_IMSK_SET_TCM            0x00000040    /* Transmit Collision Error Interrupt Mask */
#define SPI_IMSK_SET_MFM            0x00000080    /* Mode Fault Error Interrupt Mask */
#define SPI_IMSK_SET_RSM            0x00000100    /* Receive Start Interrupt Mask */
#define SPI_IMSK_SET_TSM            0x00000200    /* Transmit Start Interrupt Mask */
#define SPI_IMSK_SET_RFM            0x00000400    /* Receive Finish Interrupt Mask */
#define SPI_IMSK_SET_TFM            0x00000800    /* Transmit Finish Interrupt Mask */
/* SPI_STATUS */
#define SPI_STAT_SPIF               0x00000001    /* SPI Finished */
#define SPI_STAT_RUWM               0x00000002    /* Receive Urgent Water-Mark Breached */
#define SPI_STAT_TUWM               0x00000004    /* Transmit Urgent Water-Mark Breached */
#define SPI_STAT_ROE                0x00000010    /* Receive Over-Run Error Indication */
#define SPI_STAT_TUE                0x00000020    /* Transmit Under-Run Error Indication */
#define SPI_STAT_TCE                0x00000040    /* Transmit Collision Error Indication */
#define SPI_STAT_MODF               0x00000080    /* Mode Fault Error Indication */
#define SPI_STAT_RS                 0x00000100    /* Receive Start Indication */
#define SPI_STAT_TS                 0x00000200    /* Transmit Start Indication */
#define SPI_STAT_RF                 0x00000400    /* Receive Finish Indication */
#define SPI_STAT_TF                 0x00000800    /* Transmit Finish Indication */
#define SPI_STAT_RFS                0x00007000    /* SPI_RFIFO status */
#define SPI_STAT_RFIFO_EMPTY        0x00000000    /* RFS: RFIFO Empty */
#define SPI_STAT_RFIFO_25           0x00001000    /* RFS: RFIFO 25% Full */
#define SPI_STAT_RFIFO_50           0x00002000    /* RFS: RFIFO 50% Full */
#define SPI_STAT_RFIFO_75           0x00003000    /* RFS: RFIFO 75% Full */
#define SPI_STAT_RFIFO_FULL         0x00004000    /* RFS: RFIFO Full */
#define SPI_STAT_TFS                0x00070000    /* SPI_TFIFO status */
#define SPI_STAT_TFIFO_FULL         0x00000000    /* TFS: TFIFO full */
#define SPI_STAT_TFIFO_25           0x00010000    /* TFS: TFIFO 25% empty */
#define SPI_STAT_TFIFO_50           0x00020000    /* TFS: TFIFO 50% empty */
#define SPI_STAT_TFIFO_75           0x00030000    /* TFS: TFIFO 75% empty */
#define SPI_STAT_TFIFO_EMPTY        0x00040000    /* TFS: TFIFO empty */
#define SPI_STAT_FCS                0x00100000    /* Flow-Control Stall Indication */
#define SPI_STAT_RFE                0x00400000    /* SPI_RFIFO Empty */
#define SPI_STAT_TFF                0x00800000    /* SPI_TFIFO Full */
/* SPI_ILAT */
#define SPI_ILAT_RUWMI              0x00000002    /* Receive Urgent Water Mark Interrupt */
#define SPI_ILAT_TUWMI              0x00000004    /* Transmit Urgent Water Mark Interrupt */
#define SPI_ILAT_ROI                0x00000010    /* Receive Over-Run Error Indication */
#define SPI_ILAT_TUI                0x00000020    /* Transmit Under-Run Error Indication */
#define SPI_ILAT_TCI                0x00000040    /* Transmit Collision Error Indication */
#define SPI_ILAT_MFI                0x00000080    /* Mode Fault Error Indication */
#define SPI_ILAT_RSI                0x00000100    /* Receive Start Indication */
#define SPI_ILAT_TSI                0x00000200    /* Transmit Start Indication */
#define SPI_ILAT_RFI                0x00000400    /* Receive Finish Indication */
#define SPI_ILAT_TFI                0x00000800    /* Transmit Finish Indication */
/* SPI_ILATCL */
#define SPI_ILAT_CLR_RUWMI          0x00000002    /* Receive Urgent Water Mark Interrupt */
#define SPI_ILAT_CLR_TUWMI          0x00000004    /* Transmit Urgent Water Mark Interrupt */
#define SPI_ILAT_CLR_ROI            0x00000010    /* Receive Over-Run Error Indication */
#define SPI_ILAT_CLR_TUI            0x00000020    /* Transmit Under-Run Error Indication */
#define SPI_ILAT_CLR_TCI            0x00000040    /* Transmit Collision Error Indication */
#define SPI_ILAT_CLR_MFI            0x00000080    /* Mode Fault Error Indication */
#define SPI_ILAT_CLR_RSI            0x00000100    /* Receive Start Indication */
#define SPI_ILAT_CLR_TSI            0x00000200    /* Transmit Start Indication */
#define SPI_ILAT_CLR_RFI            0x00000400    /* Receive Finish Indication */
#define SPI_ILAT_CLR_TFI            0x00000800    /* Transmit Finish Indication */

/*
 * bfin spi3 registers layout
 */
struct bfin_spi_regs {
	u32 revid;
	u32 control;
	u32 rx_control;
	u32 tx_control;
	u32 clock;
	u32 delay;
	u32 ssel;
	u32 rwc;
	u32 rwcr;
	u32 twc;
	u32 twcr;
	u32 reserved0;
	u32 emask;
	u32 emaskcl;
	u32 emaskst;
	u32 reserved1;
	u32 status;
	u32 elat;
	u32 elatcl;
	u32 reserved2;
	u32 rfifo;
	u32 reserved3;
	u32 tfifo;
};

#define MAX_CTRL_CS          8  /* cs in spi controller */

/* device.platform_data for SSP controller devices */
struct bfin6xx_spi_master {
	u16 num_chipselect;
	u16 pin_req[7];
};

/* spi_board_info.controller_data for SPI slave devices,
 * copied to spi_device.platform_data ... mostly for dma tuning
 */
struct bfin6xx_spi_chip {
	u32 control;
	u16 cs_chg_udelay; /* Some devices require 16-bit delays */
	u32 tx_dummy_val; /* tx value for rx only transfer */
	bool enable_dma;
};

#endif /* _SPI_CHANNEL_H_ */