123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295 |
- /*
- * arch/arm/mach-orion5x/dns323-setup.c
- *
- * Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org>
- *
- * Support for HW Rev C1:
- *
- * Copyright (C) 2010 Benjamin Herrenschmidt <benh@kernel.crashing.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- */
- #include <linux/gpio.h>
- #include <linux/kernel.h>
- #include <linux/init.h>
- #include <linux/delay.h>
- #include <linux/platform_device.h>
- #include <linux/pci.h>
- #include <linux/irq.h>
- #include <linux/mtd/physmap.h>
- #include <linux/mv643xx_eth.h>
- #include <linux/leds.h>
- #include <linux/gpio_keys.h>
- #include <linux/input.h>
- #include <linux/i2c.h>
- #include <linux/ata_platform.h>
- #include <linux/phy.h>
- #include <linux/marvell_phy.h>
- #include <asm/mach-types.h>
- #include <asm/mach/arch.h>
- #include <asm/mach/pci.h>
- #include <asm/system_info.h>
- #include <mach/orion5x.h>
- #include <plat/orion-gpio.h>
- #include "common.h"
- #include "mpp.h"
- /* Rev A1 and B1 */
- #define DNS323_GPIO_LED_RIGHT_AMBER 1
- #define DNS323_GPIO_LED_LEFT_AMBER 2
- #define DNS323_GPIO_SYSTEM_UP 3
- #define DNS323_GPIO_LED_POWER1 4
- #define DNS323_GPIO_LED_POWER2 5
- #define DNS323_GPIO_OVERTEMP 6
- #define DNS323_GPIO_RTC 7
- #define DNS323_GPIO_POWER_OFF 8
- #define DNS323_GPIO_KEY_POWER 9
- #define DNS323_GPIO_KEY_RESET 10
- /* Rev C1 */
- #define DNS323C_GPIO_KEY_POWER 1
- #define DNS323C_GPIO_POWER_OFF 2
- #define DNS323C_GPIO_LED_RIGHT_AMBER 8
- #define DNS323C_GPIO_LED_LEFT_AMBER 9
- #define DNS323C_GPIO_LED_POWER 17
- #define DNS323C_GPIO_FAN_BIT1 18
- #define DNS323C_GPIO_FAN_BIT0 19
- /* Exposed to userspace, do not change */
- enum {
- DNS323_REV_A1, /* 0 */
- DNS323_REV_B1, /* 1 */
- DNS323_REV_C1, /* 2 */
- };
- /****************************************************************************
- * PCI setup
- */
- static int __init dns323_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
- {
- int irq;
- /*
- * Check for devices with hard-wired IRQs.
- */
- irq = orion5x_pci_map_irq(dev, slot, pin);
- if (irq != -1)
- return irq;
- return -1;
- }
- static struct hw_pci dns323_pci __initdata = {
- .nr_controllers = 2,
- .setup = orion5x_pci_sys_setup,
- .scan = orion5x_pci_sys_scan_bus,
- .map_irq = dns323_pci_map_irq,
- };
- static int __init dns323_pci_init(void)
- {
- /* Rev B1 and C1 doesn't really use its PCI bus, and initialising PCI
- * gets in the way of initialising the SATA controller.
- */
- if (machine_is_dns323() && system_rev == DNS323_REV_A1)
- pci_common_init(&dns323_pci);
- return 0;
- }
- subsys_initcall(dns323_pci_init);
- /****************************************************************************
- * 8MiB NOR flash (Spansion S29GL064M90TFIR4)
- *
- * Layout as used by D-Link:
- * 0x00000000-0x00010000 : "MTD1"
- * 0x00010000-0x00020000 : "MTD2"
- * 0x00020000-0x001a0000 : "Linux Kernel"
- * 0x001a0000-0x007d0000 : "File System"
- * 0x007d0000-0x00800000 : "u-boot"
- */
- #define DNS323_NOR_BOOT_BASE 0xf4000000
- #define DNS323_NOR_BOOT_SIZE SZ_8M
- static struct mtd_partition dns323_partitions[] = {
- {
- .name = "MTD1",
- .size = 0x00010000,
- .offset = 0,
- }, {
- .name = "MTD2",
- .size = 0x00010000,
- .offset = 0x00010000,
- }, {
- .name = "Linux Kernel",
- .size = 0x00180000,
- .offset = 0x00020000,
- }, {
- .name = "File System",
- .size = 0x00630000,
- .offset = 0x001A0000,
- }, {
- .name = "u-boot",
- .size = 0x00030000,
- .offset = 0x007d0000,
- },
- };
- static struct physmap_flash_data dns323_nor_flash_data = {
- .width = 1,
- .parts = dns323_partitions,
- .nr_parts = ARRAY_SIZE(dns323_partitions)
- };
- static struct resource dns323_nor_flash_resource = {
- .flags = IORESOURCE_MEM,
- .start = DNS323_NOR_BOOT_BASE,
- .end = DNS323_NOR_BOOT_BASE + DNS323_NOR_BOOT_SIZE - 1,
- };
- static struct platform_device dns323_nor_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &dns323_nor_flash_data,
- },
- .resource = &dns323_nor_flash_resource,
- .num_resources = 1,
- };
- /****************************************************************************
- * Ethernet
- */
- static struct mv643xx_eth_platform_data dns323_eth_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(8),
- };
- /* dns323_parse_hex_*() taken from tsx09-common.c; should a common copy of these
- * functions be kept somewhere?
- */
- static int __init dns323_parse_hex_nibble(char n)
- {
- if (n >= '0' && n <= '9')
- return n - '0';
- if (n >= 'A' && n <= 'F')
- return n - 'A' + 10;
- if (n >= 'a' && n <= 'f')
- return n - 'a' + 10;
- return -1;
- }
- static int __init dns323_parse_hex_byte(const char *b)
- {
- int hi;
- int lo;
- hi = dns323_parse_hex_nibble(b[0]);
- lo = dns323_parse_hex_nibble(b[1]);
- if (hi < 0 || lo < 0)
- return -1;
- return (hi << 4) | lo;
- }
- static int __init dns323_read_mac_addr(void)
- {
- u_int8_t addr[6];
- int i;
- char *mac_page;
- /* MAC address is stored as a regular ol' string in /dev/mtdblock4
- * (0x007d0000-0x00800000) starting at offset 196480 (0x2ff80).
- */
- mac_page = ioremap(DNS323_NOR_BOOT_BASE + 0x7d0000 + 196480, 1024);
- if (!mac_page)
- return -ENOMEM;
- /* Sanity check the string we're looking at */
- for (i = 0; i < 5; i++) {
- if (*(mac_page + (i * 3) + 2) != ':') {
- goto error_fail;
- }
- }
- for (i = 0; i < 6; i++) {
- int byte;
- byte = dns323_parse_hex_byte(mac_page + (i * 3));
- if (byte < 0) {
- goto error_fail;
- }
- addr[i] = byte;
- }
- iounmap(mac_page);
- printk("DNS-323: Found ethernet MAC address: ");
- for (i = 0; i < 6; i++)
- printk("%.2x%s", addr[i], (i < 5) ? ":" : ".\n");
- memcpy(dns323_eth_data.mac_addr, addr, 6);
- return 0;
- error_fail:
- iounmap(mac_page);
- return -EINVAL;
- }
- /****************************************************************************
- * GPIO LEDs (simple - doesn't use hardware blinking support)
- */
- static struct gpio_led dns323ab_leds[] = {
- {
- .name = "power:blue",
- .gpio = DNS323_GPIO_LED_POWER2,
- .default_trigger = "default-on",
- }, {
- .name = "right:amber",
- .gpio = DNS323_GPIO_LED_RIGHT_AMBER,
- .active_low = 1,
- }, {
- .name = "left:amber",
- .gpio = DNS323_GPIO_LED_LEFT_AMBER,
- .active_low = 1,
- },
- };
- static struct gpio_led dns323c_leds[] = {
- {
- .name = "power:blue",
- .gpio = DNS323C_GPIO_LED_POWER,
- .default_trigger = "timer",
- .active_low = 1,
- }, {
- .name = "right:amber",
- .gpio = DNS323C_GPIO_LED_RIGHT_AMBER,
- .active_low = 1,
- }, {
- .name = "left:amber",
- .gpio = DNS323C_GPIO_LED_LEFT_AMBER,
- .active_low = 1,
- },
- };
- static struct gpio_led_platform_data dns323ab_led_data = {
- .num_leds = ARRAY_SIZE(dns323ab_leds),
- .leds = dns323ab_leds,
- .gpio_blink_set = orion_gpio_led_blink_set,
- };
|