| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325 | 
							- /*
 
-  * arch/arm/mach-ks8695/pci.c
 
-  *
 
-  *  Copyright (C) 2003, Micrel Semiconductors
 
-  *  Copyright (C) 2006, Greg Ungerer <gerg@snapgear.com>
 
-  *  Copyright (C) 2006, Ben Dooks
 
-  *  Copyright (C) 2007, Andrew Victor
 
-  *
 
-  * This program is free software; you can redistribute it and/or modify
 
-  * it under the terms of the GNU General Public License as published by
 
-  * the Free Software Foundation; either version 2 of the License, or
 
-  * (at your option) any later version.
 
-  *
 
-  * This program is distributed in the hope that it will be useful,
 
-  * but WITHOUT ANY WARRANTY; without even the implied warranty of
 
-  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 
-  * GNU General Public License for more details.
 
-  *
 
-  * You should have received a copy of the GNU General Public License
 
-  * along with this program; if not, write to the Free Software
 
-  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 
-  */
 
- #include <linux/kernel.h>
 
- #include <linux/pci.h>
 
- #include <linux/mm.h>
 
- #include <linux/init.h>
 
- #include <linux/irq.h>
 
- #include <linux/delay.h>
 
- #include <linux/io.h>
 
- #include <asm/signal.h>
 
- #include <asm/mach/pci.h>
 
- #include <mach/hardware.h>
 
- #include <mach/devices.h>
 
- #include <mach/regs-pci.h>
 
- static int pci_dbg;
 
- static int pci_cfg_dbg;
 
- static void ks8695_pci_setupconfig(unsigned int bus_nr, unsigned int devfn, unsigned int where)
 
- {
 
- 	unsigned long pbca;
 
- 	pbca = PBCA_ENABLE | (where & ~3);
 
- 	pbca |= PCI_SLOT(devfn) << 11 ;
 
- 	pbca |= PCI_FUNC(devfn) << 8;
 
- 	pbca |= bus_nr << 16;
 
- 	if (bus_nr == 0) {
 
- 		/* use Type-0 transaction */
 
- 		__raw_writel(pbca, KS8695_PCI_VA + KS8695_PBCA);
 
- 	} else {
 
- 		/* use Type-1 transaction */
 
- 		__raw_writel(pbca | PBCA_TYPE1, KS8695_PCI_VA + KS8695_PBCA);
 
- 	}
 
- }
 
- /*
 
-  * The KS8695 datasheet prohibits anything other than 32bit accesses
 
-  * to the IO registers, so all our configuration must be done with
 
-  * 32bit operations, and the correct bit masking and shifting.
 
-  */
 
- static int ks8695_pci_readconfig(struct pci_bus *bus,
 
- 			unsigned int devfn, int where, int size, u32 *value)
 
- {
 
- 	ks8695_pci_setupconfig(bus->number, devfn, where);
 
- 	*value = __raw_readl(KS8695_PCI_VA +  KS8695_PBCD);
 
- 	switch (size) {
 
- 		case 4:
 
- 			break;
 
- 		case 2:
 
- 			*value = *value >> ((where & 2) * 8);
 
- 			*value &= 0xffff;
 
- 			break;
 
- 		case 1:
 
- 			*value = *value >> ((where & 3) * 8);
 
- 			*value &= 0xff;
 
- 			break;
 
- 	}
 
- 	if (pci_cfg_dbg) {
 
- 		printk("read: %d,%08x,%02x,%d: %08x (%08x)\n",
 
- 			bus->number, devfn, where, size, *value,
 
- 			__raw_readl(KS8695_PCI_VA +  KS8695_PBCD));
 
- 	}
 
- 	return PCIBIOS_SUCCESSFUL;
 
- }
 
- static int ks8695_pci_writeconfig(struct pci_bus *bus,
 
- 			unsigned int devfn, int where, int size, u32 value)
 
- {
 
- 	unsigned long tmp;
 
- 	if (pci_cfg_dbg) {
 
- 		printk("write: %d,%08x,%02x,%d: %08x\n",
 
- 			bus->number, devfn, where, size, value);
 
- 	}
 
- 	ks8695_pci_setupconfig(bus->number, devfn, where);
 
- 	switch (size) {
 
- 		case 4:
 
- 			__raw_writel(value, KS8695_PCI_VA +  KS8695_PBCD);
 
- 			break;
 
- 		case 2:
 
- 			tmp = __raw_readl(KS8695_PCI_VA +  KS8695_PBCD);
 
- 			tmp &= ~(0xffff << ((where & 2) * 8));
 
- 			tmp |= value << ((where & 2) * 8);
 
- 			__raw_writel(tmp, KS8695_PCI_VA +  KS8695_PBCD);
 
- 			break;
 
- 		case 1:
 
- 			tmp = __raw_readl(KS8695_PCI_VA +  KS8695_PBCD);
 
- 			tmp &= ~(0xff << ((where & 3) * 8));
 
- 			tmp |= value << ((where & 3) * 8);
 
- 			__raw_writel(tmp, KS8695_PCI_VA +  KS8695_PBCD);
 
- 			break;
 
- 	}
 
- 	return PCIBIOS_SUCCESSFUL;
 
- }
 
- static void ks8695_local_writeconfig(int where, u32 value)
 
- {
 
- 	ks8695_pci_setupconfig(0, 0, where);
 
- 	__raw_writel(value, KS8695_PCI_VA + KS8695_PBCD);
 
- }
 
- static struct pci_ops ks8695_pci_ops = {
 
- 	.read	= ks8695_pci_readconfig,
 
- 	.write	= ks8695_pci_writeconfig,
 
- };
 
- static struct resource pci_mem = {
 
- 	.name	= "PCI Memory space",
 
- 	.start	= KS8695_PCIMEM_PA,
 
- 	.end	= KS8695_PCIMEM_PA + (KS8695_PCIMEM_SIZE - 1),
 
- 	.flags	= IORESOURCE_MEM,
 
- };
 
- static struct resource pci_io = {
 
- 	.name	= "PCI IO space",
 
- 	.start	= KS8695_PCIIO_PA,
 
- 	.end	= KS8695_PCIIO_PA + (KS8695_PCIIO_SIZE - 1),
 
- 	.flags	= IORESOURCE_IO,
 
- };
 
- static int __init ks8695_pci_setup(int nr, struct pci_sys_data *sys)
 
- {
 
- 	if (nr > 0)
 
- 		return 0;
 
- 	request_resource(&iomem_resource, &pci_mem);
 
- 	request_resource(&ioport_resource, &pci_io);
 
- 	pci_add_resource_offset(&sys->resources, &pci_io, sys->io_offset);
 
- 	pci_add_resource_offset(&sys->resources, &pci_mem, sys->mem_offset);
 
- 	/* Assign and enable processor bridge */
 
- 	ks8695_local_writeconfig(PCI_BASE_ADDRESS_0, KS8695_PCIMEM_PA);
 
- 	/* Enable bus-master & Memory Space access */
 
- 	ks8695_local_writeconfig(PCI_COMMAND, PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
 
- 	/* Set cache-line size & latency. */
 
- 	ks8695_local_writeconfig(PCI_CACHE_LINE_SIZE, (32 << 8) | (L1_CACHE_BYTES / sizeof(u32)));
 
- 	/* Reserve PCI memory space for PCI-AHB resources */
 
- 	if (!request_mem_region(KS8695_PCIMEM_PA, SZ_64M, "PCI-AHB Bridge")) {
 
- 		printk(KERN_ERR "Cannot allocate PCI-AHB Bridge memory.\n");
 
- 		return -EBUSY;
 
- 	}
 
- 	return 1;
 
- }
 
- static inline unsigned int size_mask(unsigned long size)
 
- {
 
- 	return (~size) + 1;
 
- }
 
- static int ks8695_pci_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 
- {
 
- 	unsigned long pc = instruction_pointer(regs);
 
- 	unsigned long instr = *(unsigned long *)pc;
 
- 	unsigned long cmdstat;
 
- 	cmdstat = __raw_readl(KS8695_PCI_VA + KS8695_CRCFCS);
 
- 	printk(KERN_ERR "PCI abort: address = 0x%08lx fsr = 0x%03x PC = 0x%08lx LR = 0x%08lx [%s%s%s%s%s]\n",
 
- 		addr, fsr, regs->ARM_pc, regs->ARM_lr,
 
- 		cmdstat & (PCI_STATUS_SIG_TARGET_ABORT << 16) ? "GenTarget" : " ",
 
- 		cmdstat & (PCI_STATUS_REC_TARGET_ABORT << 16) ? "RecvTarget" : " ",
 
- 		cmdstat & (PCI_STATUS_REC_MASTER_ABORT << 16) ? "MasterAbort" : " ",
 
- 		cmdstat & (PCI_STATUS_SIG_SYSTEM_ERROR << 16) ? "SysError" : " ",
 
- 		cmdstat & (PCI_STATUS_DETECTED_PARITY << 16)  ? "Parity" : " "
 
- 	);
 
- 	__raw_writel(cmdstat, KS8695_PCI_VA + KS8695_CRCFCS);
 
- 	/*
 
- 	 * If the instruction being executed was a read,
 
- 	 * make it look like it read all-ones.
 
- 	 */
 
- 	if ((instr & 0x0c100000) == 0x04100000) {
 
- 		int reg = (instr >> 12) & 15;
 
- 		unsigned long val;
 
- 		if (instr & 0x00400000)
 
- 			val = 255;
 
- 		else
 
- 			val = -1;
 
- 		regs->uregs[reg] = val;
 
- 		regs->ARM_pc += 4;
 
- 		return 0;
 
- 	}
 
- 	if ((instr & 0x0e100090) == 0x00100090) {
 
- 		int reg = (instr >> 12) & 15;
 
- 		regs->uregs[reg] = -1;
 
- 		regs->ARM_pc += 4;
 
- 		return 0;
 
- 	}
 
- 	return 1;
 
- }
 
- static void __init ks8695_pci_preinit(void)
 
- {
 
- 	/* make software reset to avoid freeze if PCI bus was messed up */
 
- 	__raw_writel(0x80000000, KS8695_PCI_VA + KS8695_PBCS);
 
- 	/* stage 1 initialization, subid, subdevice = 0x0001 */
 
- 	__raw_writel(0x00010001, KS8695_PCI_VA + KS8695_CRCSID);
 
- 	/* stage 2 initialization */
 
- 	/* prefetch limits with 16 words, retry enable */
 
- 	__raw_writel(0x40000000, KS8695_PCI_VA + KS8695_PBCS);
 
- 	/* configure memory mapping */
 
- 	__raw_writel(KS8695_PCIMEM_PA, KS8695_PCI_VA + KS8695_PMBA);
 
- 	__raw_writel(size_mask(KS8695_PCIMEM_SIZE), KS8695_PCI_VA + KS8695_PMBAM);
 
- 	__raw_writel(KS8695_PCIMEM_PA, KS8695_PCI_VA + KS8695_PMBAT);
 
- 	__raw_writel(0, KS8695_PCI_VA + KS8695_PMBAC);
 
- 	/* configure IO mapping */
 
- 	__raw_writel(KS8695_PCIIO_PA, KS8695_PCI_VA + KS8695_PIOBA);
 
- 	__raw_writel(size_mask(KS8695_PCIIO_SIZE), KS8695_PCI_VA + KS8695_PIOBAM);
 
- 	__raw_writel(KS8695_PCIIO_PA, KS8695_PCI_VA + KS8695_PIOBAT);
 
- 	__raw_writel(0, KS8695_PCI_VA + KS8695_PIOBAC);
 
- 	/* hook in fault handlers */
 
- 	hook_fault_code(8, ks8695_pci_fault, SIGBUS, 0, "external abort on non-linefetch");
 
- 	hook_fault_code(10, ks8695_pci_fault, SIGBUS, 0, "external abort on non-linefetch");
 
- }
 
- static void ks8695_show_pciregs(void)
 
- {
 
- 	if (!pci_dbg)
 
- 		return;
 
- 	printk(KERN_INFO "PCI: CRCFID = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_CRCFID));
 
- 	printk(KERN_INFO "PCI: CRCFCS = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_CRCFCS));
 
- 	printk(KERN_INFO "PCI: CRCFRV = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_CRCFRV));
 
- 	printk(KERN_INFO "PCI: CRCFLT = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_CRCFLT));
 
- 	printk(KERN_INFO "PCI: CRCBMA = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_CRCBMA));
 
- 	printk(KERN_INFO "PCI: CRCSID = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_CRCSID));
 
- 	printk(KERN_INFO "PCI: CRCFIT = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_CRCFIT));
 
- 	printk(KERN_INFO "PCI: PBM    = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PBM));
 
- 	printk(KERN_INFO "PCI: PBCS   = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PBCS));
 
- 	printk(KERN_INFO "PCI: PMBA   = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PMBA));
 
- 	printk(KERN_INFO "PCI: PMBAC  = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PMBAC));
 
- 	printk(KERN_INFO "PCI: PMBAM  = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PMBAM));
 
- 	printk(KERN_INFO "PCI: PMBAT  = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PMBAT));
 
- 	printk(KERN_INFO "PCI: PIOBA  = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PIOBA));
 
- 	printk(KERN_INFO "PCI: PIOBAC = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PIOBAC));
 
- 	printk(KERN_INFO "PCI: PIOBAM = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PIOBAM));
 
- 	printk(KERN_INFO "PCI: PIOBAT = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PIOBAT));
 
- }
 
- static struct hw_pci ks8695_pci __initdata = {
 
- 	.nr_controllers	= 1,
 
- 	.ops		= &ks8695_pci_ops,
 
- 	.preinit	= ks8695_pci_preinit,
 
- 	.setup		= ks8695_pci_setup,
 
- 	.postinit	= NULL,
 
- 	.map_irq	= NULL,
 
- };
 
- void __init ks8695_init_pci(struct ks8695_pci_cfg *cfg)
 
- {
 
- 	if (__raw_readl(KS8695_PCI_VA + KS8695_CRCFRV) & CFRV_GUEST) {
 
- 		printk("PCI: KS8695 in guest mode, not initialising\n");
 
- 		return;
 
- 	}
 
- 	pcibios_min_io = 0;
 
- 	pcibios_min_mem = 0;
 
- 	printk(KERN_INFO "PCI: Initialising\n");
 
- 	ks8695_show_pciregs();
 
- 	/* set Mode */
 
- 	__raw_writel(cfg->mode << 29, KS8695_PCI_VA + KS8695_PBM);
 
- 	ks8695_pci.map_irq = cfg->map_irq;	/* board-specific map_irq method */
 
- 	pci_common_init(&ks8695_pci);
 
- }
 
 
  |