| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361 | #ifndef __ALPHA_LCA__H__#define __ALPHA_LCA__H__#include <asm/compiler.h>#include <asm/mce.h>/* * Low Cost Alpha (LCA) definitions (these apply to 21066 and 21068, * for example). * * This file is based on: * *	DECchip 21066 and DECchip 21068 Alpha AXP Microprocessors *	Hardware Reference Manual; Digital Equipment Corp.; May 1994; *	Maynard, MA; Order Number: EC-N2681-71. *//* * NOTE: The LCA uses a Host Address Extension (HAE) register to access *	 PCI addresses that are beyond the first 27 bits of address *	 space.  Updating the HAE requires an external cycle (and *	 a memory barrier), which tends to be slow.  Instead of updating *	 it on each sparse memory access, we keep the current HAE value *	 cached in variable cache_hae.  Only if the cached HAE differs *	 from the desired HAE value do we actually updated HAE register. *	 The HAE register is preserved by the interrupt handler entry/exit *	 code, so this scheme works even in the presence of interrupts. * * Dense memory space doesn't require the HAE, but is restricted to * aligned 32 and 64 bit accesses.  Special Cycle and Interrupt * Acknowledge cycles may also require the use of the HAE.  The LCA * limits I/O address space to the bottom 24 bits of address space, * but this easily covers the 16 bit ISA I/O address space. *//* * NOTE 2! The memory operations do not set any memory barriers, as * it's not needed for cases like a frame buffer that is essentially * memory-like.  You need to do them by hand if the operations depend * on ordering. * * Similarly, the port I/O operations do a "mb" only after a write * operation: if an mb is needed before (as in the case of doing * memory mapped I/O first, and then a port I/O operation to the same * device), it needs to be done by hand. * * After the above has bitten me 100 times, I'll give up and just do * the mb all the time, but right now I'm hoping this will work out. * Avoiding mb's may potentially be a noticeable speed improvement, * but I can't honestly say I've tested it. * * Handling interrupts that need to do mb's to synchronize to * non-interrupts is another fun race area.  Don't do it (because if * you do, I'll have to do *everything* with interrupts disabled, * ugh). *//* * Memory Controller registers: */#define LCA_MEM_BCR0		(IDENT_ADDR + 0x120000000UL)#define LCA_MEM_BCR1		(IDENT_ADDR + 0x120000008UL)#define LCA_MEM_BCR2		(IDENT_ADDR + 0x120000010UL)#define LCA_MEM_BCR3		(IDENT_ADDR + 0x120000018UL)#define LCA_MEM_BMR0		(IDENT_ADDR + 0x120000020UL)#define LCA_MEM_BMR1		(IDENT_ADDR + 0x120000028UL)#define LCA_MEM_BMR2		(IDENT_ADDR + 0x120000030UL)#define LCA_MEM_BMR3		(IDENT_ADDR + 0x120000038UL)#define LCA_MEM_BTR0		(IDENT_ADDR + 0x120000040UL)#define LCA_MEM_BTR1		(IDENT_ADDR + 0x120000048UL)#define LCA_MEM_BTR2		(IDENT_ADDR + 0x120000050UL)#define LCA_MEM_BTR3		(IDENT_ADDR + 0x120000058UL)#define LCA_MEM_GTR		(IDENT_ADDR + 0x120000060UL)#define LCA_MEM_ESR		(IDENT_ADDR + 0x120000068UL)#define LCA_MEM_EAR		(IDENT_ADDR + 0x120000070UL)#define LCA_MEM_CAR		(IDENT_ADDR + 0x120000078UL)#define LCA_MEM_VGR		(IDENT_ADDR + 0x120000080UL)#define LCA_MEM_PLM		(IDENT_ADDR + 0x120000088UL)#define LCA_MEM_FOR		(IDENT_ADDR + 0x120000090UL)/* * I/O Controller registers: */#define LCA_IOC_HAE		(IDENT_ADDR + 0x180000000UL)#define LCA_IOC_CONF		(IDENT_ADDR + 0x180000020UL)#define LCA_IOC_STAT0		(IDENT_ADDR + 0x180000040UL)#define LCA_IOC_STAT1		(IDENT_ADDR + 0x180000060UL)#define LCA_IOC_TBIA		(IDENT_ADDR + 0x180000080UL)#define LCA_IOC_TB_ENA		(IDENT_ADDR + 0x1800000a0UL)#define LCA_IOC_SFT_RST		(IDENT_ADDR + 0x1800000c0UL)#define LCA_IOC_PAR_DIS		(IDENT_ADDR + 0x1800000e0UL)#define LCA_IOC_W_BASE0		(IDENT_ADDR + 0x180000100UL)#define LCA_IOC_W_BASE1		(IDENT_ADDR + 0x180000120UL)#define LCA_IOC_W_MASK0		(IDENT_ADDR + 0x180000140UL)#define LCA_IOC_W_MASK1		(IDENT_ADDR + 0x180000160UL)#define LCA_IOC_T_BASE0		(IDENT_ADDR + 0x180000180UL)#define LCA_IOC_T_BASE1		(IDENT_ADDR + 0x1800001a0UL)#define LCA_IOC_TB_TAG0		(IDENT_ADDR + 0x188000000UL)#define LCA_IOC_TB_TAG1		(IDENT_ADDR + 0x188000020UL)#define LCA_IOC_TB_TAG2		(IDENT_ADDR + 0x188000040UL)#define LCA_IOC_TB_TAG3		(IDENT_ADDR + 0x188000060UL)#define LCA_IOC_TB_TAG4		(IDENT_ADDR + 0x188000070UL)#define LCA_IOC_TB_TAG5		(IDENT_ADDR + 0x1880000a0UL)#define LCA_IOC_TB_TAG6		(IDENT_ADDR + 0x1880000c0UL)#define LCA_IOC_TB_TAG7		(IDENT_ADDR + 0x1880000e0UL)/* * Memory spaces: */#define LCA_IACK_SC		(IDENT_ADDR + 0x1a0000000UL)#define LCA_CONF		(IDENT_ADDR + 0x1e0000000UL)#define LCA_IO			(IDENT_ADDR + 0x1c0000000UL)#define LCA_SPARSE_MEM		(IDENT_ADDR + 0x200000000UL)#define LCA_DENSE_MEM		(IDENT_ADDR + 0x300000000UL)/* * Bit definitions for I/O Controller status register 0: */#define LCA_IOC_STAT0_CMD		0xf#define LCA_IOC_STAT0_ERR		(1<<4)#define LCA_IOC_STAT0_LOST		(1<<5)#define LCA_IOC_STAT0_THIT		(1<<6)#define LCA_IOC_STAT0_TREF		(1<<7)#define LCA_IOC_STAT0_CODE_SHIFT	8#define LCA_IOC_STAT0_CODE_MASK		0x7#define LCA_IOC_STAT0_P_NBR_SHIFT	13#define LCA_IOC_STAT0_P_NBR_MASK	0x7ffff#define LCA_HAE_ADDRESS		LCA_IOC_HAE/* LCA PMR Power Management register defines */#define LCA_PMR_ADDR	(IDENT_ADDR + 0x120000098UL)#define LCA_PMR_PDIV    0x7                     /* Primary clock divisor */#define LCA_PMR_ODIV    0x38                    /* Override clock divisor */#define LCA_PMR_INTO    0x40                    /* Interrupt override */#define LCA_PMR_DMAO    0x80                    /* DMA override */#define LCA_PMR_OCCEB   0xffff0000L             /* Override cycle counter - even bits */#define LCA_PMR_OCCOB   0xffff000000000000L     /* Override cycle counter - even bits */#define LCA_PMR_PRIMARY_MASK    0xfffffffffffffff8L/* LCA PMR Macros */#define LCA_READ_PMR        (*(volatile unsigned long *)LCA_PMR_ADDR)#define LCA_WRITE_PMR(d)    (*((volatile unsigned long *)LCA_PMR_ADDR) = (d))#define LCA_GET_PRIMARY(r)  ((r) & LCA_PMR_PDIV)#define LCA_GET_OVERRIDE(r) (((r) >> 3) & LCA_PMR_PDIV)#define LCA_SET_PRIMARY_CLOCK(r, c) ((r) = (((r) & LCA_PMR_PRIMARY_MASK)|(c)))/* LCA PMR Divisor values */#define LCA_PMR_DIV_1   0x0#define LCA_PMR_DIV_1_5 0x1#define LCA_PMR_DIV_2   0x2#define LCA_PMR_DIV_4   0x3#define LCA_PMR_DIV_8   0x4#define LCA_PMR_DIV_16  0x5#define LCA_PMR_DIV_MIN DIV_1#define LCA_PMR_DIV_MAX DIV_16/* * Data structure for handling LCA machine checks.  Correctable errors * result in a short logout frame, uncorrectable ones in a long one. */struct el_lca_mcheck_short {	struct el_common	h;		/* common logout header */	unsigned long		esr;		/* error-status register */	unsigned long		ear;		/* error-address register */	unsigned long		dc_stat;	/* dcache status register */	unsigned long		ioc_stat0;	/* I/O controller status register 0 */	unsigned long		ioc_stat1;	/* I/O controller status register 1 */};struct el_lca_mcheck_long {	struct el_common	h;		/* common logout header */	unsigned long		pt[31];		/* PAL temps */	unsigned long		exc_addr;	/* exception address */	unsigned long		pad1[3];	unsigned long		pal_base;	/* PALcode base address */	unsigned long		hier;		/* hw interrupt enable */	unsigned long		hirr;		/* hw interrupt request */	unsigned long		mm_csr;		/* MMU control & status */	unsigned long		dc_stat;	/* data cache status */	unsigned long		dc_addr;	/* data cache addr register */	unsigned long		abox_ctl;	/* address box control register */	unsigned long		esr;		/* error status register */	unsigned long		ear;		/* error address register */	unsigned long		car;		/* cache control register */	unsigned long		ioc_stat0;	/* I/O controller status register 0 */	unsigned long		ioc_stat1;	/* I/O controller status register 1 */	unsigned long		va;		/* virtual address register */};union el_lca {	struct el_common *		c;	struct el_lca_mcheck_long *	l;	struct el_lca_mcheck_short *	s;};#ifdef __KERNEL__#ifndef __EXTERN_INLINE#define __EXTERN_INLINE extern inline#define __IO_EXTERN_INLINE#endif/* * I/O functions: * * Unlike Jensen, the Noname machines have no concept of local * I/O---everything goes over the PCI bus. * * There is plenty room for optimization here.  In particular, * the Alpha's insb/insw/extb/extw should be useful in moving * data to/from the right byte-lanes. */#define vip	volatile int __force *#define vuip	volatile unsigned int __force *#define vulp	volatile unsigned long __force *#define LCA_SET_HAE						\	do {							\		if (addr >= (1UL << 24)) {			\			unsigned long msb = addr & 0xf8000000;	\			addr -= msb;				\			set_hae(msb);				\		}						\	} while (0)__EXTERN_INLINE unsigned int lca_ioread8(void __iomem *xaddr){	unsigned long addr = (unsigned long) xaddr;	unsigned long result, base_and_type;	if (addr >= LCA_DENSE_MEM) {		addr -= LCA_DENSE_MEM;		LCA_SET_HAE;		base_and_type = LCA_SPARSE_MEM + 0x00;	} else {		addr -= LCA_IO;		base_and_type = LCA_IO + 0x00;	}	result = *(vip) ((addr << 5) + base_and_type);	return __kernel_extbl(result, addr & 3);}__EXTERN_INLINE void lca_iowrite8(u8 b, void __iomem *xaddr){	unsigned long addr = (unsigned long) xaddr;	unsigned long w, base_and_type;	if (addr >= LCA_DENSE_MEM) {		addr -= LCA_DENSE_MEM;		LCA_SET_HAE;		base_and_type = LCA_SPARSE_MEM + 0x00;	} else {		addr -= LCA_IO;		base_and_type = LCA_IO + 0x00;	}	w = __kernel_insbl(b, addr & 3);	*(vuip) ((addr << 5) + base_and_type) = w;}__EXTERN_INLINE unsigned int lca_ioread16(void __iomem *xaddr){	unsigned long addr = (unsigned long) xaddr;	unsigned long result, base_and_type;	if (addr >= LCA_DENSE_MEM) {		addr -= LCA_DENSE_MEM;		LCA_SET_HAE;		base_and_type = LCA_SPARSE_MEM + 0x08;	} else {		addr -= LCA_IO;		base_and_type = LCA_IO + 0x08;	}	result = *(vip) ((addr << 5) + base_and_type);	return __kernel_extwl(result, addr & 3);}__EXTERN_INLINE void lca_iowrite16(u16 b, void __iomem *xaddr){	unsigned long addr = (unsigned long) xaddr;	unsigned long w, base_and_type;	if (addr >= LCA_DENSE_MEM) {		addr -= LCA_DENSE_MEM;		LCA_SET_HAE;		base_and_type = LCA_SPARSE_MEM + 0x08;	} else {		addr -= LCA_IO;		base_and_type = LCA_IO + 0x08;	}	w = __kernel_inswl(b, addr & 3);	*(vuip) ((addr << 5) + base_and_type) = w;}__EXTERN_INLINE unsigned int lca_ioread32(void __iomem *xaddr){	unsigned long addr = (unsigned long) xaddr;	if (addr < LCA_DENSE_MEM)		addr = ((addr - LCA_IO) << 5) + LCA_IO + 0x18;	return *(vuip)addr;}__EXTERN_INLINE void lca_iowrite32(u32 b, void __iomem *xaddr){	unsigned long addr = (unsigned long) xaddr;	if (addr < LCA_DENSE_MEM)		addr = ((addr - LCA_IO) << 5) + LCA_IO + 0x18;	*(vuip)addr = b;}__EXTERN_INLINE void __iomem *lca_ioportmap(unsigned long addr){	return (void __iomem *)(addr + LCA_IO);}__EXTERN_INLINE void __iomem *lca_ioremap(unsigned long addr,					  unsigned long size){	return (void __iomem *)(addr + LCA_DENSE_MEM);}__EXTERN_INLINE int lca_is_ioaddr(unsigned long addr){	return addr >= IDENT_ADDR + 0x120000000UL;}__EXTERN_INLINE int lca_is_mmio(const volatile void __iomem *addr){	return (unsigned long)addr >= LCA_DENSE_MEM;}#undef vip#undef vuip#undef vulp#undef __IO_PREFIX#define __IO_PREFIX		lca#define lca_trivial_rw_bw	2#define lca_trivial_rw_lq	1#define lca_trivial_io_bw	0#define lca_trivial_io_lq	0#define lca_trivial_iounmap	1#include <asm/io_trivial.h>#ifdef __IO_EXTERN_INLINE#undef __EXTERN_INLINE#undef __IO_EXTERN_INLINE#endif#endif /* __KERNEL__ */#endif /* __ALPHA_LCA__H__ */
 |