aiot/waterHeterogeneousDataSynchronization/dataSharedMemory/alarmMemoryDefinition.c

/*
 * Copyright (C) 2008-2012 ST-Ericsson
 *
 * Author: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2, as
 * published by the Free Software Foundation.
 *
 */
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/i2c.h>
#include <linux/platform_data/i2c-nomadik.h>
#include <linux/platform_data/db8500_thermal.h>
#include <linux/gpio.h>
#include <linux/amba/bus.h>
#include <linux/amba/pl022.h>
#include <linux/amba/serial.h>
#include <linux/spi/spi.h>
#include <linux/mfd/abx500/ab8500.h>
#include <linux/regulator/ab8500.h>
#include <linux/regulator/fixed.h>
#include <linux/mfd/tc3589x.h>
#include <linux/mfd/tps6105x.h>
#include <linux/mfd/abx500/ab8500-gpio.h>
#include <linux/mfd/abx500/ab8500-codec.h>
#include <linux/leds-lp5521.h>
#include <linux/input.h>
#include <linux/smsc911x.h>
#include <linux/gpio_keys.h>
#include <linux/delay.h>
#include <linux/leds.h>
#include <linux/pinctrl/consumer.h>
#include <linux/platform_data/pinctrl-nomadik.h>
#include <linux/platform_data/dma-ste-dma40.h>

#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/hardware/gic.h>

#include <mach/hardware.h>
#include <mach/setup.h>
#include <mach/devices.h>
#include <mach/irqs.h>
#include <linux/platform_data/crypto-ux500.h>

#include "ste-dma40-db8500.h"
#include "devices-db8500.h"
#include "board-mop500.h"
#include "board-mop500-regulators.h"

static struct gpio_led snowball_led_array[] = {
	{
		.name = "user_led",
		.default_trigger = "heartbeat",
		.gpio = 142,
	},
};

static struct gpio_led_platform_data snowball_led_data = {
	.leds = snowball_led_array,
	.num_leds = ARRAY_SIZE(snowball_led_array),
};

static struct platform_device snowball_led_dev = {
	.name = "leds-gpio",
	.dev = {
		.platform_data = &snowball_led_data,
	},
};

static struct fixed_voltage_config snowball_gpio_en_3v3_data = {
       .supply_name            = "EN-3V3",
       .gpio                   = SNOWBALL_EN_3V3_ETH_GPIO,
       .microvolts             = 3300000,
       .enable_high            = 1,
       .init_data              = &gpio_en_3v3_regulator,
       .startup_delay          = 5000, /* 1200us */
};

static struct platform_device snowball_gpio_en_3v3_regulator_dev = {
       .name   = "reg-fixed-voltage",
       .id     = 1,
       .dev    = {
               .platform_data  = &snowball_gpio_en_3v3_data,
       },
};

static struct ab8500_gpio_platform_data ab8500_gpio_pdata = {
	.gpio_base		= MOP500_AB8500_PIN_GPIO(1),
	.irq_base		= MOP500_AB8500_VIR_GPIO_IRQ_BASE,
	/* config_reg is the initial configuration of ab8500 pins.
	 * The pins can be configured as GPIO or alt functions based
	 * on value present in GpioSel1 to GpioSel6 and AlternatFunction
	 * register. This is the array of 7 configuration settings.
	 * One has to compile time decide these settings. Below is the
	 * explanation of these setting
	 * GpioSel1 = 0x00 => Pins GPIO1 to GPIO8 are not used as GPIO
	 * GpioSel2 = 0x1E => Pins GPIO10 to GPIO13 are configured as GPIO
	 * GpioSel3 = 0x80 => Pin GPIO24 is configured as GPIO
	 * GpioSel4 = 0x01 => Pin GPIo25 is configured as GPIO
	 * GpioSel5 = 0x7A => Pins GPIO34, GPIO36 to GPIO39 are conf as GPIO
	 * GpioSel6 = 0x00 => Pins GPIO41 & GPIo42 are not configured as GPIO
	 * AlternaFunction = 0x00 => If Pins GPIO10 to 13 are not configured
	 * as GPIO then this register selectes the alternate fucntions
	 */
	.config_reg		= {0x00, 0x1E, 0x80, 0x01,
					0x7A, 0x00, 0x00},
};

/* ab8500-codec */
static struct ab8500_codec_platform_data ab8500_codec_pdata = {
	.amics =  {
		.mic1_type = AMIC_TYPE_DIFFERENTIAL,
		.mic2_type = AMIC_TYPE_DIFFERENTIAL,
		.mic1a_micbias = AMIC_MICBIAS_VAMIC1,
		.mic1b_micbias = AMIC_MICBIAS_VAMIC1,
		.mic2_micbias = AMIC_MICBIAS_VAMIC2
	},
	.ear_cmv = EAR_CMV_0_95V
};

static struct gpio_keys_button snowball_key_array[] = {
	{
		.gpio           = 32,
		.type           = EV_KEY,
		.code           = KEY_1,
		.desc           = "userpb",
		.active_low     = 1,
		.debounce_interval = 50,
		.wakeup         = 1,
	},
	{
		.gpio           = 151,
		.type           = EV_KEY,
		.code           = KEY_2,
		.desc           = "extkb1",
		.active_low     = 1,
		.debounce_interval = 50,
		.wakeup         = 1,
	},
	{
		.gpio           = 152,
		.type           = EV_KEY,
		.code           = KEY_3,
		.desc           = "extkb2",
		.active_low     = 1,
		.debounce_interval = 50,
		.wakeup         = 1,
	},
	{
		.gpio           = 161,
		.type           = EV_KEY,
		.code           = KEY_4,
		.desc           = "extkb3",
		.active_low     = 1,
		.debounce_interval = 50,
		.wakeup         = 1,
	},
	{
		.gpio           = 162,
		.type           = EV_KEY,
		.code           = KEY_5,
		.desc           = "extkb4",
		.active_low     = 1,
		.debounce_interval = 50,
		.wakeup         = 1,
	},
};

static struct gpio_keys_platform_data snowball_key_data = {
	.buttons        = snowball_key_array,
	.nbuttons       = ARRAY_SIZE(snowball_key_array),
};

static struct platform_device snowball_key_dev = {
	.name           = "gpio-keys",
	.id             = -1,
	.dev            = {
		.platform_data  = &snowball_key_data,
	}
};

static struct smsc911x_platform_config snowball_sbnet_cfg = {
	.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
	.irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
	.flags = SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY,
	.shift = 1,
};

static struct resource sbnet_res[] = {
	{
		.name = "smsc911x-memory",
		.start = (0x5000 << 16),
		.end  =  (0x5000 << 16) + 0xffff,
		.flags = IORESOURCE_MEM,
	},
	{
		.start = NOMADIK_GPIO_TO_IRQ(140),
		.end = NOMADIK_GPIO_TO_IRQ(140),
		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
	},
};

static struct platform_device snowball_sbnet_dev = {
	.name           = "smsc911x",
	.num_resources  = ARRAY_SIZE(sbnet_res),
	.resource       = sbnet_res,
	.dev            = {
		.platform_data = &snowball_sbnet_cfg,
	},
};

static struct ab8500_platform_data ab8500_platdata = {
	.irq_base	= MOP500_AB8500_IRQ_BASE,
	.regulator_reg_init = ab8500_regulator_reg_init,
	.num_regulator_reg_init	= ARRAY_SIZE(ab8500_regulator_reg_init),
	.regulator	= ab8500_regulators,
	.num_regulator	= ARRAY_SIZE(ab8500_regulators),
	.gpio		= &ab8500_gpio_pdata,
	.codec		= &ab8500_codec_pdata,
};

/*
 * Thermal Sensor
 */

static struct resource db8500_thsens_resources[] = {
	{
		.name = "IRQ_HOTMON_LOW",
		.start  = IRQ_PRCMU_HOTMON_LOW,
		.end    = IRQ_PRCMU_HOTMON_LOW,
		.flags  = IORESOURCE_IRQ,
	},
	{
		.name = "IRQ_HOTMON_HIGH",
		.start  = IRQ_PRCMU_HOTMON_HIGH,
		.end    = IRQ_PRCMU_HOTMON_HIGH,
		.flags  = IORESOURCE_IRQ,
	},
};

static struct db8500_thsens_platform_data db8500_thsens_data = {
	.trip_points[0] = {
		.temp = 70000,
		.type = THERMAL_TRIP_ACTIVE,
		.cdev_name = {
			[0] = "thermal-cpufreq-0",
		},
	},
	.trip_points[1] = {
		.temp = 75000,
		.type = THERMAL_TRIP_ACTIVE,
		.cdev_name = {
			[0] = "thermal-cpufreq-0",
		},
	},
	.trip_points[2] = {
		.temp = 80000,
		.type = THERMAL_TRIP_ACTIVE,
		.cdev_name = {
			[0] = "thermal-cpufreq-0",
		},
	},
	.trip_points[3] = {
		.temp = 85000,
		.type = THERMAL_TRIP_CRITICAL,
	},
	.num_trips = 4,
};

static struct platform_device u8500_thsens_device = {
	.name           = "db8500-thermal",
	.resource       = db8500_thsens_resources,
	.num_resources  = ARRAY_SIZE(db8500_thsens_resources),
	.dev	= {
		.platform_data	= &db8500_thsens_data,
	},
};

static struct platform_device u8500_cpufreq_cooling_device = {
	.name           = "db8500-cpufreq-cooling",
};

/*
 * TPS61052
 */

static struct tps6105x_platform_data mop500_tps61052_data = {
	.mode = TPS6105X_MODE_VOLTAGE,
	.regulator_data = &tps61052_regulator,
};

/*
 * TC35892
 */

static void mop500_tc35892_init(struct tc3589x *tc3589x, unsigned int base)
{
	struct device *parent = NULL;
#if 0
	/* FIXME: Is the sdi actually part of tc3589x? */
	parent = tc3589x->dev;
#endif
	mop500_sdi_tc35892_init(parent);
}

static struct tc3589x_gpio_platform_data mop500_tc35892_gpio_data = {
	.gpio_base	= MOP500_EGPIO(0),
	.setup		= mop500_tc35892_init,
};

static struct tc3589x_platform_data mop500_tc35892_data = {
	.block		= TC3589x_BLOCK_GPIO,
	.gpio		= &mop500_tc35892_gpio_data,
	.irq_base	= MOP500_EGPIO_IRQ_BASE,
};

static struct lp5521_led_config lp5521_pri_led[] = {
       [0] = {
	       .chan_nr = 0,
	       .led_current = 0x2f,
	       .max_current = 0x5f,
       },
       [1] = {
	       .chan_nr = 1,
	       .led_current = 0x2f,
	       .max_current = 0x5f,
       },
       [2] = {
	       .chan_nr = 2,
	       .led_current = 0x2f,
	       .max_current = 0x5f,
       },
};

static struct lp5521_platform_data __initdata lp5521_pri_data = {
       .label = "lp5521_pri",
       .led_config     = &lp5521_pri_led[0],
       .num_channels   = 3,
       .clock_mode     = LP5521_CLOCK_EXT,
};

static struct lp5521_led_config lp5521_sec_led[] = {
       [0] = {
	       .chan_nr = 0,
	       .led_current = 0x2f,
	       .max_current = 0x5f,
       },
       [1] = {
	       .chan_nr = 1,
	       .led_current = 0x2f,
	       .max_current = 0x5f,
       },
       [2] = {
	       .chan_nr = 2,
	       .led_current = 0x2f,
	       .max_current = 0x5f,
       },
};

static struct lp5521_platform_data __initdata lp5521_sec_data = {
       .label = "lp5521_sec",
       .led_config     = &lp5521_sec_led[0],
       .num_channels   = 3,
       .clock_mode     = LP5521_CLOCK_EXT,
};

static struct i2c_board_info __initdata mop500_i2c0_devices[] = {
	{
		I2C_BOARD_INFO("tc3589x", 0x42),
		.irq		= NOMADIK_GPIO_TO_IRQ(217),
		.platform_data  = &mop500_tc35892_data,
	},
	/* I2C0 devices only available prior to HREFv60 */
	{
		I2C_BOARD_INFO("tps61052", 0x33),
		.platform_data  = &mop500_tps61052_data,
	},
};

#define NUM_PRE_V60_I2C0_DEVICES 1

static struct i2c_board_info __initdata mop500_i2c2_devices[] = {
	{
		/* lp5521 LED driver, 1st device */
		I2C_BOARD_INFO("lp5521", 0x33),
		.platform_data = &lp5521_pri_data,
	},
	{
		/* lp5521 LED driver, 2st device */
		I2C_BOARD_INFO("lp5521", 0x34),
		.platform_data = &lp5521_sec_data,
	},
	{
		/* Light sensor Rohm BH1780GLI */
		I2C_BOARD_INFO("bh1780", 0x29),
	},
};

static void __init mop500_i2c_init(struct device *parent)
{
	db8500_add_i2c0(parent, NULL);
	db8500_add_i2c1(parent, NULL);
	db8500_add_i2c2(parent, NULL);
	db8500_add_i2c3(parent, NULL);
}

static struct gpio_keys_button mop500_gpio_keys[] = {
	{
		.desc			= "SFH7741 Proximity Sensor",
		.type			= EV_SW,
		.code			= SW_FRONT_PROXIMITY,
		.active_low		= 0,
		.can_disable		= 1,
	}
};

static struct regulator *prox_regulator;
static int mop500_prox_activate(struct device *dev);
static void mop500_prox_deactivate(struct device *dev);

static struct gpio_keys_platform_data mop500_gpio_keys_data = {
	.buttons	= mop500_gpio_keys,
	.nbuttons	= ARRAY_SIZE(mop500_gpio_keys),
	.enable		= mop500_prox_activate,
	.disable	= mop500_prox_deactivate,
};

static struct platform_device mop500_gpio_keys_device = {
	.name	= "gpio-keys",
	.id	= 0,
	.dev	= {
		.platform_data	= &mop500_gpio_keys_data,
	},
};

static int mop500_prox_activate(struct device *dev)
{
	prox_regulator = regulator_get(&mop500_gpio_keys_device.dev,
						"vcc");
	if (IS_ERR(prox_regulator)) {
		dev_err(&mop500_gpio_keys_device.dev,
			"no regulator\n");
		return PTR_ERR(prox_regulator);
	}
	regulator_enable(prox_regulator);
	return 0;
}

static void mop500_prox_deactivate(struct device *dev)
{
	regulator_disable(prox_regulator);
	regulator_put(prox_regulator);
}

static struct cryp_platform_data u8500_cryp1_platform_data = {
		.mem_to_engine = {
				.dir = STEDMA40_MEM_TO_PERIPH,
				.src_dev_type = STEDMA40_DEV_SRC_MEMORY,
				.dst_dev_type = DB8500_DMA_DEV48_CAC1_TX,
				.src_info.data_width = STEDMA40_WORD_WIDTH,
				.dst_info.data_width = STEDMA40_WORD_WIDTH,
				.mode = STEDMA40_MODE_LOGICAL,
				.src_info.psize = STEDMA40_PSIZE_LOG_4,
				.dst_info.psize = STEDMA40_PSIZE_LOG_4,
		},
		.engine_to_mem = {
				.dir = STEDMA40_PERIPH_TO_MEM,
				.src_dev_type = DB8500_DMA_DEV48_CAC1_RX,
				.dst_dev_type = STEDMA40_DEV_DST_MEMORY,
				.src_info.data_width = STEDMA40_WORD_WIDTH,
				.dst_info.data_width = STEDMA40_WORD_WIDTH,
				.mode = STEDMA40_MODE_LOGICAL,
				.src_info.psize = STEDMA40_PSIZE_LOG_4,
				.dst_info.psize = STEDMA40_PSIZE_LOG_4,
		}
};

static struct stedma40_chan_cfg u8500_hash_dma_cfg_tx = {
		.dir = STEDMA40_MEM_TO_PERIPH,
		.src_dev_type = STEDMA40_DEV_SRC_MEMORY,
		.dst_dev_type = DB8500_DMA_DEV50_HAC1_TX,
		.src_info.data_width = STEDMA40_WORD_WIDTH,
		.dst_info.data_width = STEDMA40_WORD_WIDTH,
		.mode = STEDMA40_MODE_LOGICAL,
		.src_info.psize = STEDMA40_PSIZE_LOG_16,
		.dst_info.psize = STEDMA40_PSIZE_LOG_16,
};

static struct hash_platform_data u8500_hash1_platform_data = {
		.mem_to_engine = &u8500_hash_dma_cfg_tx,
		.dma_filter = stedma40_filter,
};

/* add any platform devices here - TODO */
static struct platform_device *mop500_platform_devs[] __initdata = {