aiot/efDataDiscreteRateMining/databaseOperation/analysisDataOperation.h

/*
 *	FILE    	SA-1100.h
 *
 *	Version 	1.2
 *	Author  	Copyright (c) Marc A. Viredaz, 1998
 *	        	DEC Western Research Laboratory, Palo Alto, CA
 *	Date    	January 1998 (April 1997)
 *	System  	StrongARM SA-1100
 *	Language	C or ARM Assembly
 *	Purpose 	Definition of constants related to the StrongARM
 *	        	SA-1100 microprocessor (Advanced RISC Machine (ARM)
 *	        	architecture version 4). This file is based on the
 *	        	StrongARM SA-1100 data sheet version 2.2.
 *
 */


/* Be sure that virtual mapping is defined right */
#ifndef __ASM_ARCH_HARDWARE_H
#error You must include hardware.h not SA-1100.h
#endif

#include "bitfield.h"

/*
 * SA1100 CS line to physical address
 */

#define SA1100_CS0_PHYS	0x00000000
#define SA1100_CS1_PHYS	0x08000000
#define SA1100_CS2_PHYS	0x10000000
#define SA1100_CS3_PHYS	0x18000000
#define SA1100_CS4_PHYS	0x40000000
#define SA1100_CS5_PHYS	0x48000000

/*
 * Personal Computer Memory Card International Association (PCMCIA) sockets
 */

#define PCMCIAPrtSp	0x04000000	/* PCMCIA Partition Space [byte]   */
#define PCMCIASp	(4*PCMCIAPrtSp)	/* PCMCIA Space [byte]             */
#define PCMCIAIOSp	PCMCIAPrtSp	/* PCMCIA I/O Space [byte]         */
#define PCMCIAAttrSp	PCMCIAPrtSp	/* PCMCIA Attribute Space [byte]   */
#define PCMCIAMemSp	PCMCIAPrtSp	/* PCMCIA Memory Space [byte]      */

#define PCMCIA0Sp	PCMCIASp	/* PCMCIA 0 Space [byte]           */
#define PCMCIA0IOSp	PCMCIAIOSp	/* PCMCIA 0 I/O Space [byte]       */
#define PCMCIA0AttrSp	PCMCIAAttrSp	/* PCMCIA 0 Attribute Space [byte] */
#define PCMCIA0MemSp	PCMCIAMemSp	/* PCMCIA 0 Memory Space [byte]    */

#define PCMCIA1Sp	PCMCIASp	/* PCMCIA 1 Space [byte]           */
#define PCMCIA1IOSp	PCMCIAIOSp	/* PCMCIA 1 I/O Space [byte]       */
#define PCMCIA1AttrSp	PCMCIAAttrSp	/* PCMCIA 1 Attribute Space [byte] */
#define PCMCIA1MemSp	PCMCIAMemSp	/* PCMCIA 1 Memory Space [byte]    */

#define _PCMCIA(Nb)	        	/* PCMCIA [0..1]                   */ \
                	(0x20000000 + (Nb)*PCMCIASp)
#define _PCMCIAIO(Nb)	_PCMCIA (Nb)	/* PCMCIA I/O [0..1]               */
#define _PCMCIAAttr(Nb)	        	/* PCMCIA Attribute [0..1]         */ \
                	(_PCMCIA (Nb) + 2*PCMCIAPrtSp)
#define _PCMCIAMem(Nb)	        	/* PCMCIA Memory [0..1]            */ \
                	(_PCMCIA (Nb) + 3*PCMCIAPrtSp)

#define _PCMCIA0	_PCMCIA (0)	/* PCMCIA 0                        */
#define _PCMCIA0IO	_PCMCIAIO (0)	/* PCMCIA 0 I/O                    */
#define _PCMCIA0Attr	_PCMCIAAttr (0)	/* PCMCIA 0 Attribute              */
#define _PCMCIA0Mem	_PCMCIAMem (0)	/* PCMCIA 0 Memory                 */

#define _PCMCIA1	_PCMCIA (1)	/* PCMCIA 1                        */
#define _PCMCIA1IO	_PCMCIAIO (1)	/* PCMCIA 1 I/O                    */
#define _PCMCIA1Attr	_PCMCIAAttr (1)	/* PCMCIA 1 Attribute              */
#define _PCMCIA1Mem	_PCMCIAMem (1)	/* PCMCIA 1 Memory                 */


/*
 * Universal Serial Bus (USB) Device Controller (UDC) control registers
 *
 * Registers
 *    Ser0UDCCR 	Serial port 0 Universal Serial Bus (USB) Device
 *              	Controller (UDC) Control Register (read/write).
 *    Ser0UDCAR 	Serial port 0 Universal Serial Bus (USB) Device
 *              	Controller (UDC) Address Register (read/write).
 *    Ser0UDCOMP	Serial port 0 Universal Serial Bus (USB) Device
 *              	Controller (UDC) Output Maximum Packet size register
 *              	(read/write).
 *    Ser0UDCIMP	Serial port 0 Universal Serial Bus (USB) Device
 *              	Controller (UDC) Input Maximum Packet size register
 *              	(read/write).
 *    Ser0UDCCS0	Serial port 0 Universal Serial Bus (USB) Device
 *              	Controller (UDC) Control/Status register end-point 0
 *              	(read/write).
 *    Ser0UDCCS1	Serial port 0 Universal Serial Bus (USB) Device
 *              	Controller (UDC) Control/Status register end-point 1
 *              	(output, read/write).
 *    Ser0UDCCS2	Serial port 0 Universal Serial Bus (USB) Device
 *              	Controller (UDC) Control/Status register end-point 2
 *              	(input, read/write).
 *    Ser0UDCD0 	Serial port 0 Universal Serial Bus (USB) Device
 *              	Controller (UDC) Data register end-point 0
 *              	(read/write).
 *    Ser0UDCWC 	Serial port 0 Universal Serial Bus (USB) Device
 *              	Controller (UDC) Write Count register end-point 0
 *              	(read).
 *    Ser0UDCDR 	Serial port 0 Universal Serial Bus (USB) Device
 *              	Controller (UDC) Data Register (read/write).
 *    Ser0UDCSR 	Serial port 0 Universal Serial Bus (USB) Device
 *              	Controller (UDC) Status Register (read/write).
 */

#define Ser0UDCCR	__REG(0x80000000)  /* Ser. port 0 UDC Control Reg. */
#define Ser0UDCAR	__REG(0x80000004)  /* Ser. port 0 UDC Address Reg. */
#define Ser0UDCOMP	__REG(0x80000008)  /* Ser. port 0 UDC Output Maximum Packet size reg. */
#define Ser0UDCIMP	__REG(0x8000000C)  /* Ser. port 0 UDC Input Maximum Packet size reg. */
#define Ser0UDCCS0	__REG(0x80000010)  /* Ser. port 0 UDC Control/Status reg. end-point 0 */
#define Ser0UDCCS1	__REG(0x80000014)  /* Ser. port 0 UDC Control/Status reg. end-point 1 (output) */
#define Ser0UDCCS2	__REG(0x80000018)  /* Ser. port 0 UDC Control/Status reg. end-point 2 (input) */
#define Ser0UDCD0	__REG(0x8000001C)  /* Ser. port 0 UDC Data reg. end-point 0 */
#define Ser0UDCWC	__REG(0x80000020)  /* Ser. port 0 UDC Write Count reg. end-point 0 */
#define Ser0UDCDR	__REG(0x80000028)  /* Ser. port 0 UDC Data Reg. */
#define Ser0UDCSR	__REG(0x80000030)  /* Ser. port 0 UDC Status Reg. */

#define UDCCR_UDD	0x00000001	/* UDC Disable                     */
#define UDCCR_UDA	0x00000002	/* UDC Active (read)               */
#define UDCCR_RESIM	0x00000004	/* Resume Interrupt Mask, per errata */
#define UDCCR_EIM	0x00000008	/* End-point 0 Interrupt Mask      */
                	        	/* (disable)                       */
#define UDCCR_RIM	0x00000010	/* Receive Interrupt Mask          */
                	        	/* (disable)                       */
#define UDCCR_TIM	0x00000020	/* Transmit Interrupt Mask         */
                	        	/* (disable)                       */
#define UDCCR_SRM	0x00000040	/* Suspend/Resume interrupt Mask   */
                	        	/* (disable)                       */
#define UDCCR_SUSIM	UDCCR_SRM	/* Per errata, SRM just masks suspend */
#define UDCCR_REM	0x00000080	/* REset interrupt Mask (disable)  */

#define UDCAR_ADD	Fld (7, 0)	/* function ADDress                */

#define UDCOMP_OUTMAXP	Fld (8, 0)	/* OUTput MAXimum Packet size - 1  */
                	        	/* [byte]                          */
#define UDCOMP_OutMaxPkt(Size)  	/* Output Maximum Packet size      */ \
                	        	/* [1..256 byte]                   */ \
                	(((Size) - 1) << FShft (UDCOMP_OUTMAXP))

#define UDCIMP_INMAXP	Fld (8, 0)	/* INput MAXimum Packet size - 1   */
                	        	/* [byte]                          */
#define UDCIMP_InMaxPkt(Size)   	/* Input Maximum Packet size       */ \
                	        	/* [1..256 byte]                   */ \
                	(((Size) - 1) << FShft (UDCIMP_INMAXP))

#define UDCCS0_OPR	0x00000001	/* Output Packet Ready (read)      */
#define UDCCS0_IPR	0x00000002	/* Input Packet Ready              */
#define UDCCS0_SST	0x00000004	/* Sent STall                      */
#define UDCCS0_FST	0x00000008	/* Force STall                     */
#define UDCCS0_DE	0x00000010	/* Data End                        */
#define UDCCS0_SE	0x00000020	/* Setup End (read)                */
#define UDCCS0_SO	0x00000040	/* Serviced Output packet ready    */
                	        	/* (write)                         */
#define UDCCS0_SSE	0x00000080	/* Serviced Setup End (write)      */

#define UDCCS1_RFS	0x00000001	/* Receive FIFO 12-bytes or more   */
                	        	/* Service request (read)          */
#define UDCCS1_RPC	0x00000002	/* Receive Packet Complete         */
#define UDCCS1_RPE	0x00000004	/* Receive Packet Error (read)     */
#define UDCCS1_SST	0x00000008	/* Sent STall                      */
#define UDCCS1_FST	0x00000010	/* Force STall                     */
#define UDCCS1_RNE	0x00000020	/* Receive FIFO Not Empty (read)   */

#define UDCCS2_TFS	0x00000001	/* Transmit FIFO 8-bytes or less   */
                	        	/* Service request (read)          */
#define UDCCS2_TPC	0x00000002	/* Transmit Packet Complete        */