| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290 | /* * DO NOT EDIT THIS FILE * This file is under version control at *   svn://sources.blackfin.uclinux.org/toolchain/trunk/proc-defs/header-frags/ * and can be replaced with that version at any time * DO NOT EDIT THIS FILE * * Copyright 2004-2011 Analog Devices Inc. * Licensed under the Clear BSD license. *//* This file should be up to date with: *  - Revision F, 05/23/2011; ADSP-BF526 Blackfin Processor Anomaly List *  - Revision I, 05/23/2011; ADSP-BF527 Blackfin Processor Anomaly List */#ifndef _MACH_ANOMALY_H_#define _MACH_ANOMALY_H_/* We do not support old silicon - sorry */#if __SILICON_REVISION__ < 0# error will not work on BF526/BF527 silicon version#endif#if defined(__ADSPBF522__) || defined(__ADSPBF524__) || defined(__ADSPBF526__)# define ANOMALY_BF526 1#else# define ANOMALY_BF526 0#endif#if defined(__ADSPBF523__) || defined(__ADSPBF525__) || defined(__ADSPBF527__)# define ANOMALY_BF527 1#else# define ANOMALY_BF527 0#endif#define _ANOMALY_BF526(rev526) (ANOMALY_BF526 && __SILICON_REVISION__ rev526)#define _ANOMALY_BF527(rev527) (ANOMALY_BF527 && __SILICON_REVISION__ rev527)#define _ANOMALY_BF526_BF527(rev526, rev527) (_ANOMALY_BF526(rev526) || _ANOMALY_BF527(rev527))/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */#define ANOMALY_05000074 (1)/* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */#define ANOMALY_05000119 (1)/* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */#define ANOMALY_05000122 (1)/* False Hardware Error from an Access in the Shadow of a Conditional Branch */#define ANOMALY_05000245 (1)/* Incorrect Timer Pulse Width in Single-Shot PWM_OUT Mode with External Clock */#define ANOMALY_05000254 (1)/* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */#define ANOMALY_05000265 (1)/* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */#define ANOMALY_05000310 (1)/* PPI Is Level-Sensitive on First Transfer In Single Frame Sync Modes */#define ANOMALY_05000313 (_ANOMALY_BF526_BF527(< 1, < 2))/* Incorrect Access of OTP_STATUS During otp_write() Function */#define ANOMALY_05000328 (_ANOMALY_BF527(< 2))/* Host DMA Boot Modes Are Not Functional */#define ANOMALY_05000330 (_ANOMALY_BF527(< 2))/* Disallowed Configuration Prevents Subsequent Allowed Configuration on Host DMA Port */#define ANOMALY_05000337 (_ANOMALY_BF527(< 2))/* Ethernet MAC MDIO Reads Do Not Meet IEEE Specification */#define ANOMALY_05000341 (_ANOMALY_BF527(< 2))/* TWI May Not Operate Correctly Under Certain Signal Termination Conditions */#define ANOMALY_05000342 (_ANOMALY_BF527(< 2))/* USB Calibration Value Is Not Initialized */#define ANOMALY_05000346 (_ANOMALY_BF526_BF527(< 1, < 2))/* USB Calibration Value to use */#define ANOMALY_05000346_value 0xE510/* Preboot Routine Incorrectly Alters Reset Value of USB Register */#define ANOMALY_05000347 (_ANOMALY_BF527(< 2))/* Security Features Are Not Functional */#define ANOMALY_05000348 (_ANOMALY_BF527(< 1))/* bfrom_SysControl() Firmware Function Performs Improper System Reset */#define ANOMALY_05000353 (_ANOMALY_BF526(< 1))/* Regulator Programming Blocked when Hibernate Wakeup Source Remains Active */#define ANOMALY_05000355 (_ANOMALY_BF527(< 2))/* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */#define ANOMALY_05000357 (_ANOMALY_BF527(< 2))/* Incorrect Revision Number in DSPID Register */#define ANOMALY_05000364 (_ANOMALY_BF527(== 1))/* PPI Underflow Error Goes Undetected in ITU-R 656 Mode */#define ANOMALY_05000366 (1)/* Incorrect Default CSEL Value in PLL_DIV */#define ANOMALY_05000368 (_ANOMALY_BF527(< 2))/* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */#define ANOMALY_05000371 (_ANOMALY_BF527(< 2))/* Authentication Fails To Initiate */#define ANOMALY_05000376 (_ANOMALY_BF527(< 2))/* Data Read From L3 Memory by USB DMA May be Corrupted */#define ANOMALY_05000380 (_ANOMALY_BF527(< 2))/* 8-Bit NAND Flash Boot Mode Not Functional */#define ANOMALY_05000382 (_ANOMALY_BF526_BF527(< 1, < 2))/* Boot from OTP Memory Not Functional */#define ANOMALY_05000385 (_ANOMALY_BF527(< 2))/* bfrom_SysControl() Firmware Routine Not Functional */#define ANOMALY_05000386 (_ANOMALY_BF527(< 2))/* Programmable Preboot Settings Not Functional */#define ANOMALY_05000387 (_ANOMALY_BF527(< 2))/* CRC32 Checksum Support Not Functional */#define ANOMALY_05000388 (_ANOMALY_BF526_BF527(< 1, < 2))/* Reset Vector Must Not Be in SDRAM Memory Space */#define ANOMALY_05000389 (_ANOMALY_BF527(< 2))/* pTempCurrent Not Present in ADI_BOOT_DATA Structure */#define ANOMALY_05000392 (_ANOMALY_BF527(< 2))/* Deprecated Value of dTempByteCount in ADI_BOOT_DATA Structure */#define ANOMALY_05000393 (_ANOMALY_BF527(< 2))/* Log Buffer Not Functional */#define ANOMALY_05000394 (_ANOMALY_BF527(< 2))/* Hook Routine Not Functional */#define ANOMALY_05000395 (_ANOMALY_BF527(< 2))/* Header Indirect Bit Not Functional */#define ANOMALY_05000396 (_ANOMALY_BF527(< 2))/* BK_ONES, BK_ZEROS, and BK_DATECODE Constants Not Functional */#define ANOMALY_05000397 (_ANOMALY_BF527(< 2))/* SWRESET, DFRESET and WDRESET Bits in the SYSCR Register Not Functional */#define ANOMALY_05000398 (_ANOMALY_BF527(< 2))/* BCODE_NOBOOT in BCODE Field of SYSCR Register Not Functional */#define ANOMALY_05000399 (_ANOMALY_BF527(< 2))/* PPI Data Signals D0 and D8 do not Tristate After Disabling PPI */#define ANOMALY_05000401 (_ANOMALY_BF526_BF527(< 1, < 2))/* Level-Sensitive External GPIO Wakeups May Cause Indefinite Stall */#define ANOMALY_05000403 (_ANOMALY_BF526_BF527(< 1, < 2))/* Lockbox SESR Disallows Certain User Interrupts */#define ANOMALY_05000404 (_ANOMALY_BF526_BF527(< 1, < 2))/* Lockbox SESR Firmware Does Not Save/Restore Full Context */#define ANOMALY_05000405 (1)/* Lockbox SESR Firmware Arguments Are Not Retained After First Initialization */#define ANOMALY_05000407 (_ANOMALY_BF526_BF527(< 1, < 2))/* Lockbox Firmware Memory Cleanup Routine Does not Clear Registers */#define ANOMALY_05000408 (1)/* Lockbox firmware leaves MDMA0 channel enabled */#define ANOMALY_05000409 (_ANOMALY_BF526_BF527(< 1, < 2))/* Incorrect Default Internal Voltage Regulator Setting */#define ANOMALY_05000410 (_ANOMALY_BF527(< 2))/* bfrom_SysControl() Firmware Function Cannot be Used to Enter Power Saving Modes */#define ANOMALY_05000411 (_ANOMALY_BF526(< 1))/* OTP_CHECK_FOR_PREV_WRITE Bit is Not Functional in bfrom_OtpWrite() API */#define ANOMALY_05000414 (_ANOMALY_BF526_BF527(< 1, < 2))/* DEB2_URGENT Bit Not Functional */#define ANOMALY_05000415 (_ANOMALY_BF526_BF527(< 1, < 2))/* Speculative Fetches Can Cause Undesired External FIFO Operations */#define ANOMALY_05000416 (1)/* SPORT0 Ignores External TSCLK0 on PG14 When TMR6 is an Output */#define ANOMALY_05000417 (_ANOMALY_BF527(< 2))/* PPI Timing Requirements tSFSPE and tHFSPE Do Not Meet Data Sheet Specifications */#define ANOMALY_05000418 (_ANOMALY_BF526_BF527(< 1, < 2))/* USB PLL_STABLE Bit May Not Accurately Reflect the USB PLL's Status */#define ANOMALY_05000420 (_ANOMALY_BF526_BF527(< 1, < 2))/* TWI Fall Time (Tof) May Violate the Minimum I2C Specification */#define ANOMALY_05000421 (1)/* TWI Input Capacitance (Ci) May Violate the Maximum I2C Specification */#define ANOMALY_05000422 (_ANOMALY_BF526_BF527(> 0, > 1))/* Certain Ethernet Frames With Errors are Misclassified in RMII Mode */#define ANOMALY_05000423 (_ANOMALY_BF526_BF527(< 1, < 2))/* Internal Voltage Regulator Not Trimmed */#define ANOMALY_05000424 (_ANOMALY_BF527(< 2))/* Multichannel SPORT Channel Misalignment Under Specific Configuration */#define ANOMALY_05000425 (_ANOMALY_BF526_BF527(< 1, < 2))/* Speculative Fetches of Indirect-Pointer Instructions Can Cause False Hardware Errors */#define ANOMALY_05000426 (1)/* WB_EDGE Bit in NFC_IRQSTAT Incorrectly Reflects Buffer Status Instead of IRQ Status */#define ANOMALY_05000429 (_ANOMALY_BF526_BF527(< 1, < 2))/* Software System Reset Corrupts PLL_LOCKCNT Register */#define ANOMALY_05000430 (_ANOMALY_BF527(> 1))/* Incorrect Use of Stack in Lockbox Firmware During Authentication */#define ANOMALY_05000431 (1)/* bfrom_SysControl() Does Not Clear SIC_IWR1 Before Executing PLL Programming Sequence */#define ANOMALY_05000432 (_ANOMALY_BF526(< 1))/* SW Breakpoints Ignored Upon Return From Lockbox Authentication */#define ANOMALY_05000434 (1)/* Certain SIC Registers are not Reset After Soft or Core Double Fault Reset */#define ANOMALY_05000435 (_ANOMALY_BF526_BF527(< 1, >= 0))/* Preboot Cannot be Used to Alter the PLL_DIV Register */#define ANOMALY_05000439 (_ANOMALY_BF526_BF527(< 1, >= 0))/* bfrom_SysControl() Cannot be Used to Write the PLL_DIV Register */#define ANOMALY_05000440 (_ANOMALY_BF526_BF527(< 1, >= 0))/* OTP Write Accesses Not Supported */#define ANOMALY_05000442 (_ANOMALY_BF527(< 1))/* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */#define ANOMALY_05000443 (1)/* The WURESET Bit in the SYSCR Register is not Functional */#define ANOMALY_05000445 (_ANOMALY_BF527(>= 0))/* USB DMA Short Packet Data Corruption */#define ANOMALY_05000450 (1)/* BCODE_QUICKBOOT, BCODE_ALLBOOT, and BCODE_FULLBOOT Settings in SYSCR Register Not Functional */#define ANOMALY_05000451 (_ANOMALY_BF527(>= 0))/* Incorrect Default Hysteresis Setting for RESET, NMI, and BMODE Signals */#define ANOMALY_05000452 (_ANOMALY_BF526_BF527(< 1, >= 0))/* USB Receive Interrupt Is Not Generated in DMA Mode 1 */#define ANOMALY_05000456 (1)/* Host DMA Port Responds to Certain Bus Activity Without HOST_CE Assertion */#define ANOMALY_05000457 (1)/* USB DMA Mode 1 Failure When Multiple USB DMA Channels Are Concurrently Enabled */#define ANOMALY_05000460 (1)/* False Hardware Error when RETI Points to Invalid Memory */#define ANOMALY_05000461 (1)/* Synchronization Problem at Startup May Cause SPORT Transmit Channels to Misalign */#define ANOMALY_05000462 (1)/* USB Rx DMA Hang */#define ANOMALY_05000465 (1)/* TxPktRdy Bit Not Set for Transmit Endpoint When Core and DMA Access USB Endpoint FIFOs Simultaneously */#define ANOMALY_05000466 (1)/* Possible USB RX Data Corruption When Control & Data EP FIFOs are Accessed via the Core */#define ANOMALY_05000467 (1)/* PLL Latches Incorrect Settings During Reset */#define ANOMALY_05000469 (1)/* Incorrect Default MSEL Value in PLL_CTL */#define ANOMALY_05000472 (_ANOMALY_BF526(>= 0))/* Interrupted SPORT Receive Data Register Read Results In Underflow when SLEN > 15 */#define ANOMALY_05000473 (1)/* Possible Lockup Condition when Modifying PLL from External Memory */#define ANOMALY_05000475 (1)/* TESTSET Instruction Cannot Be Interrupted */#define ANOMALY_05000477 (1)/* Reads of ITEST_COMMAND and ITEST_DATA Registers Cause Cache Corruption */#define ANOMALY_05000481 (1)/* Possible USB Data Corruption When Multiple Endpoints Are Accessed by the Core */#define ANOMALY_05000483 (1)/* PLL_CTL Change Using bfrom_SysControl() Can Result in Processor Overclocking */#define ANOMALY_05000485 (_ANOMALY_BF526_BF527(< 2, >= 0))/* The CODEC Zero-Cross Detect Feature is not Functional */#define ANOMALY_05000487 (1)/* SPI Master Boot Can Fail Under Certain Conditions */#define ANOMALY_05000490 (1)/* Instruction Memory Stalls Can Cause IFLUSH to Fail */#define ANOMALY_05000491 (1)/* EXCPT Instruction May Be Lost If NMI Happens Simultaneously */#define ANOMALY_05000494 (1)/* CNT_COMMAND Functionality Depends on CNT_IMASK Configuration */#define ANOMALY_05000498 (1)/* RXS Bit in SPI_STAT May Become Stuck In RX DMA Modes */#define ANOMALY_05000501 (1)/* Anomalies that don't exist on this proc */#define ANOMALY_05000099 (0)#define ANOMALY_05000120 (0)#define ANOMALY_05000125 (0)#define ANOMALY_05000149 (0)#define ANOMALY_05000158 (0)#define ANOMALY_05000171 (0)#define ANOMALY_05000179 (0)#define ANOMALY_05000182 (0)#define ANOMALY_05000183 (0)#define ANOMALY_05000189 (0)#define ANOMALY_05000198 (0)#define ANOMALY_05000202 (0)#define ANOMALY_05000215 (0)#define ANOMALY_05000219 (0)#define ANOMALY_05000220 (0)#define ANOMALY_05000227 (0)#define ANOMALY_05000230 (0)#define ANOMALY_05000231 (0)#define ANOMALY_05000233 (0)#define ANOMALY_05000234 (0)#define ANOMALY_05000242 (0)#define ANOMALY_05000244 (0)#define ANOMALY_05000248 (0)#define ANOMALY_05000250 (0)#define ANOMALY_05000257 (0)#define ANOMALY_05000261 (0)#define ANOMALY_05000263 (0)#define ANOMALY_05000266 (0)#define ANOMALY_05000273 (0)#define ANOMALY_05000274 (0)#define ANOMALY_05000278 (0)#define ANOMALY_05000281 (0)#define ANOMALY_05000283 (0)#define ANOMALY_05000285 (0)#define ANOMALY_05000287 (0)#define ANOMALY_05000301 (0)#define ANOMALY_05000305 (0)#define ANOMALY_05000307 (0)#define ANOMALY_05000311 (0)#define ANOMALY_05000312 (0)#define ANOMALY_05000315 (0)#define ANOMALY_05000323 (0)#define ANOMALY_05000362 (1)#define ANOMALY_05000363 (0)#define ANOMALY_05000383 (0)#define ANOMALY_05000400 (0)#define ANOMALY_05000402 (0)#define ANOMALY_05000412 (0)#define ANOMALY_05000447 (0)#define ANOMALY_05000448 (0)#define ANOMALY_05000474 (0)#define ANOMALY_05000480 (0)#define ANOMALY_16000030 (0)#endif
 |