Domovská stránka Prehľadávať Pomoc
Prihlásiť sa
lixinru
/
aiot
1
0
Fork 0
Súbory Issues 0 Pull requesty 0 Wiki
Strom: 3297cd1612
Branche Tagy
aiot
/
waterDataPreprocessing
/
monitoringDataProcessing
/
connectTheSignalSlot.h

connectTheSignalSlot.h 11 KB
História Raw

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159 
  1. /*
    2. 

  2.  * Analog Devices SPI3 controller driver
    3. 

  3.  *
    4. 

  4.  * Copyright (c) 2011 Analog Devices Inc.
    5. 

  5.  *
    6. 

  6.  * This program is free software; you can redistribute it and/or modify
    7. 

  7.  * it under the terms of the GNU General Public License version 2 as
    8. 

  8.  * published by the Free Software Foundation.
    9. 

  9.  *
    10. 

  10.  * This program is distributed in the hope that it will be useful,
    11. 

  11.  * but WITHOUT ANY WARRANTY; without even the implied warranty of
    12. 

  12.  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    13. 

  13.  * GNU General Public License for more details.
    14. 

  14.  *
    15. 

  15.  * You should have received a copy of the GNU General Public License
    16. 

  16.  * along with this program; if not, write to the Free Software
    17. 

  17.  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
    18. 

  18.  */
    19. 

  19. 

  20. #ifndef _SPI_CHANNEL_H_
    21. 

  21. #define _SPI_CHANNEL_H_
    22. 

  22. 

  23. #include <linux/types.h>
    24. 

  24. 

  25. /* SPI_CONTROL */
    26. 

  26. #define SPI_CTL_EN                  0x00000001    /* Enable */
    27. 

  27. #define SPI_CTL_MSTR                0x00000002    /* Master/Slave */
    28. 

  28. #define SPI_CTL_PSSE                0x00000004    /* controls modf error in master mode */
    29. 

  29. #define SPI_CTL_ODM                 0x00000008    /* Open Drain Mode */
    30. 

  30. #define SPI_CTL_CPHA                0x00000010    /* Clock Phase */
    31. 

  31. #define SPI_CTL_CPOL                0x00000020    /* Clock Polarity */
    32. 

  32. #define SPI_CTL_ASSEL               0x00000040    /* Slave Select Pin Control */
    33. 

  33. #define SPI_CTL_SELST               0x00000080    /* Slave Select Polarity in-between transfers */
    34. 

  34. #define SPI_CTL_EMISO               0x00000100    /* Enable MISO */
    35. 

  35. #define SPI_CTL_SIZE                0x00000600    /* Word Transfer Size */
    36. 

  36. #define SPI_CTL_SIZE08              0x00000000    /* SIZE: 8 bits */
    37. 

  37. #define SPI_CTL_SIZE16              0x00000200    /* SIZE: 16 bits */
    38. 

  38. #define SPI_CTL_SIZE32              0x00000400    /* SIZE: 32 bits */
    39. 

  39. #define SPI_CTL_LSBF                0x00001000    /* LSB First */
    40. 

  40. #define SPI_CTL_FCEN                0x00002000    /* Flow-Control Enable */
    41. 

  41. #define SPI_CTL_FCCH                0x00004000    /* Flow-Control Channel Selection */
    42. 

  42. #define SPI_CTL_FCPL                0x00008000    /* Flow-Control Polarity */
    43. 

  43. #define SPI_CTL_FCWM                0x00030000    /* Flow-Control Water-Mark */
    44. 

  44. #define SPI_CTL_FIFO0               0x00000000    /* FCWM: TFIFO empty or RFIFO Full */
    45. 

  45. #define SPI_CTL_FIFO1               0x00010000    /* FCWM: TFIFO 75% or more empty or RFIFO 75% or more full */
    46. 

  46. #define SPI_CTL_FIFO2               0x00020000    /* FCWM: TFIFO 50% or more empty or RFIFO 50% or more full */
    47. 

  47. #define SPI_CTL_FMODE               0x00040000    /* Fast-mode Enable */
    48. 

  48. #define SPI_CTL_MIOM                0x00300000    /* Multiple I/O Mode */
    49. 

  49. #define SPI_CTL_MIO_DIS             0x00000000    /* MIOM: Disable */
    50. 

  50. #define SPI_CTL_MIO_DUAL            0x00100000    /* MIOM: Enable DIOM (Dual I/O Mode) */
    51. 

  51. #define SPI_CTL_MIO_QUAD            0x00200000    /* MIOM: Enable QUAD (Quad SPI Mode) */
    52. 

  52. #define SPI_CTL_SOSI                0x00400000    /* Start on MOSI */
    53. 

  53. /* SPI_RX_CONTROL */
    54. 

  54. #define SPI_RXCTL_REN               0x00000001    /* Receive Channel Enable */
    55. 

  55. #define SPI_RXCTL_RTI               0x00000004    /* Receive Transfer Initiate */
    56. 

  56. #define SPI_RXCTL_RWCEN             0x00000008    /* Receive Word Counter Enable */
    57. 

  57. #define SPI_RXCTL_RDR               0x00000070    /* Receive Data Request */
    58. 

  58. #define SPI_RXCTL_RDR_DIS           0x00000000    /* RDR: Disabled */
    59. 

  59. #define SPI_RXCTL_RDR_NE            0x00000010    /* RDR: RFIFO not empty */
    60. 

  60. #define SPI_RXCTL_RDR_25            0x00000020    /* RDR: RFIFO 25% full */
    61. 

  61. #define SPI_RXCTL_RDR_50            0x00000030    /* RDR: RFIFO 50% full */
    62. 

  62. #define SPI_RXCTL_RDR_75            0x00000040    /* RDR: RFIFO 75% full */
    63. 

  63. #define SPI_RXCTL_RDR_FULL          0x00000050    /* RDR: RFIFO full */
    64. 

  64. #define SPI_RXCTL_RDO               0x00000100    /* Receive Data Over-Run */
    65. 

  65. #define SPI_RXCTL_RRWM              0x00003000    /* FIFO Regular Water-Mark */
    66. 

  66. #define SPI_RXCTL_RWM_0             0x00000000    /* RRWM: RFIFO Empty */
    67. 

  67. #define SPI_RXCTL_RWM_25            0x00001000    /* RRWM: RFIFO 25% full */
    68. 

  68. #define SPI_RXCTL_RWM_50            0x00002000    /* RRWM: RFIFO 50% full */
    69. 

  69. #define SPI_RXCTL_RWM_75            0x00003000    /* RRWM: RFIFO 75% full */
    70. 

  70. #define SPI_RXCTL_RUWM              0x00070000    /* FIFO Urgent Water-Mark */
    71. 

  71. #define SPI_RXCTL_UWM_DIS           0x00000000    /* RUWM: Disabled */
    72. 

  72. #define SPI_RXCTL_UWM_25            0x00010000    /* RUWM: RFIFO 25% full */
    73. 

  73. #define SPI_RXCTL_UWM_50            0x00020000    /* RUWM: RFIFO 50% full */
    74. 

  74. #define SPI_RXCTL_UWM_75            0x00030000    /* RUWM: RFIFO 75% full */
    75. 

  75. #define SPI_RXCTL_UWM_FULL          0x00040000    /* RUWM: RFIFO full */
    76. 

  76. /* SPI_TX_CONTROL */
    77. 

  77. #define SPI_TXCTL_TEN               0x00000001    /* Transmit Channel Enable */
    78. 

  78. #define SPI_TXCTL_TTI               0x00000004    /* Transmit Transfer Initiate */
    79. 

  79. #define SPI_TXCTL_TWCEN             0x00000008    /* Transmit Word Counter Enable */
    80. 

  80. #define SPI_TXCTL_TDR               0x00000070    /* Transmit Data Request */
    81. 

  81. #define SPI_TXCTL_TDR_DIS           0x00000000    /* TDR: Disabled */
    82. 

  82. #define SPI_TXCTL_TDR_NF            0x00000010    /* TDR: TFIFO not full */
    83. 

  83. #define SPI_TXCTL_TDR_25            0x00000020    /* TDR: TFIFO 25% empty */
    84. 

  84. #define SPI_TXCTL_TDR_50            0x00000030    /* TDR: TFIFO 50% empty */
    85. 

  85. #define SPI_TXCTL_TDR_75            0x00000040    /* TDR: TFIFO 75% empty */
    86. 

  86. #define SPI_TXCTL_TDR_EMPTY         0x00000050    /* TDR: TFIFO empty */
    87. 

  87. #define SPI_TXCTL_TDU               0x00000100    /* Transmit Data Under-Run */
    88. 

  88. #define SPI_TXCTL_TRWM              0x00003000    /* FIFO Regular Water-Mark */
    89. 

  89. #define SPI_TXCTL_RWM_FULL          0x00000000    /* TRWM: TFIFO full */
    90. 

  90. #define SPI_TXCTL_RWM_25            0x00001000    /* TRWM: TFIFO 25% empty */
    91. 

  91. #define SPI_TXCTL_RWM_50            0x00002000    /* TRWM: TFIFO 50% empty */
    92. 

  92. #define SPI_TXCTL_RWM_75            0x00003000    /* TRWM: TFIFO 75% empty */
    93. 

  93. #define SPI_TXCTL_TUWM              0x00070000    /* FIFO Urgent Water-Mark */
    94. 

  94. #define SPI_TXCTL_UWM_DIS           0x00000000    /* TUWM: Disabled */
    95. 

  95. #define SPI_TXCTL_UWM_25            0x00010000    /* TUWM: TFIFO 25% empty */
    96. 

  96. #define SPI_TXCTL_UWM_50            0x00020000    /* TUWM: TFIFO 50% empty */
    97. 

  97. #define SPI_TXCTL_UWM_75            0x00030000    /* TUWM: TFIFO 75% empty */
    98. 

  98. #define SPI_TXCTL_UWM_EMPTY         0x00040000    /* TUWM: TFIFO empty */
    99. 

  99. /* SPI_CLOCK */
    100. 

  100. #define SPI_CLK_BAUD                0x0000FFFF    /* Baud Rate */
    101. 

  101. /* SPI_DELAY */
    102. 

  102. #define SPI_DLY_STOP                0x000000FF    /* Transfer delay time in multiples of SCK period */
    103. 

  103. #define SPI_DLY_LEADX               0x00000100    /* Extended (1 SCK) LEAD Control */
    104. 

  104. #define SPI_DLY_LAGX                0x00000200    /* Extended (1 SCK) LAG control */
    105. 

  105. /* SPI_SSEL */
    106. 

  106. #define SPI_SLVSEL_SSE1             0x00000002    /* SPISSEL1 Enable */
    107. 

  107. #define SPI_SLVSEL_SSE2             0x00000004    /* SPISSEL2 Enable */
    108. 

  108. #define SPI_SLVSEL_SSE3             0x00000008    /* SPISSEL3 Enable */
    109. 

  109. #define SPI_SLVSEL_SSE4             0x00000010    /* SPISSEL4 Enable */
    110. 

  110. #define SPI_SLVSEL_SSE5             0x00000020    /* SPISSEL5 Enable */
    111. 

  111. #define SPI_SLVSEL_SSE6             0x00000040    /* SPISSEL6 Enable */
    112. 

  112. #define SPI_SLVSEL_SSE7             0x00000080    /* SPISSEL7 Enable */
    113. 

  113. #define SPI_SLVSEL_SSEL1            0x00000200    /* SPISSEL1 Value */
    114. 

  114. #define SPI_SLVSEL_SSEL2            0x00000400    /* SPISSEL2 Value */
    115. 

  115. #define SPI_SLVSEL_SSEL3            0x00000800    /* SPISSEL3 Value */
    116. 

  116. #define SPI_SLVSEL_SSEL4            0x00001000    /* SPISSEL4 Value */
    117. 

  117. #define SPI_SLVSEL_SSEL5            0x00002000    /* SPISSEL5 Value */
    118. 

  118. #define SPI_SLVSEL_SSEL6            0x00004000    /* SPISSEL6 Value */
    119. 

  119. #define SPI_SLVSEL_SSEL7            0x00008000    /* SPISSEL7 Value */
    120. 

  120. /* SPI_RWC */
    121. 

  121. #define SPI_RWC_VALUE               0x0000FFFF    /* Received Word-Count */
    122. 

  122. /* SPI_RWCR */
    123. 

  123. #define SPI_RWCR_VALUE              0x0000FFFF    /* Received Word-Count Reload */
    124. 

  124. /* SPI_TWC */
    125. 

  125. #define SPI_TWC_VALUE               0x0000FFFF    /* Transmitted Word-Count */
    126. 

  126. /* SPI_TWCR */
    127. 

  127. #define SPI_TWCR_VALUE              0x0000FFFF    /* Transmitted Word-Count Reload */
    128. 

  128. /* SPI_IMASK */
    129. 

  129. #define SPI_IMSK_RUWM               0x00000002    /* Receive Urgent Water-Mark Interrupt Mask */
    130. 

  130. #define SPI_IMSK_TUWM               0x00000004    /* Transmit Urgent Water-Mark Interrupt Mask */
    131. 

  131. #define SPI_IMSK_ROM                0x00000010    /* Receive Over-Run Error Interrupt Mask */
    132. 

  132. #define SPI_IMSK_TUM                0x00000020    /* Transmit Under-Run Error Interrupt Mask */
    133. 

  133. #define SPI_IMSK_TCM                0x00000040    /* Transmit Collision Error Interrupt Mask */
    134. 

  134. #define SPI_IMSK_MFM                0x00000080    /* Mode Fault Error Interrupt Mask */
    135. 

  135. #define SPI_IMSK_RSM                0x00000100    /* Receive Start Interrupt Mask */
    136. 

  136. #define SPI_IMSK_TSM                0x00000200    /* Transmit Start Interrupt Mask */
    137. 

  137. #define SPI_IMSK_RFM                0x00000400    /* Receive Finish Interrupt Mask */
    138. 

  138. #define SPI_IMSK_TFM                0x00000800    /* Transmit Finish Interrupt Mask */
    139. 

  139. /* SPI_IMASKCL */
    140. 

  140. #define SPI_IMSK_CLR_RUW            0x00000002    /* Receive Urgent Water-Mark Interrupt Mask */
    141. 

  141. #define SPI_IMSK_CLR_TUWM           0x00000004    /* Transmit Urgent Water-Mark Interrupt Mask */
    142. 

  142. #define SPI_IMSK_CLR_ROM            0x00000010    /* Receive Over-Run Error Interrupt Mask */
    143. 

  143. #define SPI_IMSK_CLR_TUM            0x00000020    /* Transmit Under-Run Error Interrupt Mask */
    144. 

  144. #define SPI_IMSK_CLR_TCM            0x00000040    /* Transmit Collision Error Interrupt Mask */
    145. 

  145. #define SPI_IMSK_CLR_MFM            0x00000080    /* Mode Fault Error Interrupt Mask */
    146. 

  146. #define SPI_IMSK_CLR_RSM            0x00000100    /* Receive Start Interrupt Mask */
    147. 

  147. #define SPI_IMSK_CLR_TSM            0x00000200    /* Transmit Start Interrupt Mask */
    148. 

  148. #define SPI_IMSK_CLR_RFM            0x00000400    /* Receive Finish Interrupt Mask */
    149. 

  149. #define SPI_IMSK_CLR_TFM            0x00000800    /* Transmit Finish Interrupt Mask */
    150. 

  150. /* SPI_IMASKST */
    151. 

  151. #define SPI_IMSK_SET_RUWM           0x00000002    /* Receive Urgent Water-Mark Interrupt Mask */
    152. 

  152. #define SPI_IMSK_SET_TUWM           0x00000004    /* Transmit Urgent Water-Mark Interrupt Mask */
    153. 

  153. #define SPI_IMSK_SET_ROM            0x00000010    /* Receive Over-Run Error Interrupt Mask */
    154. 

  154. #define SPI_IMSK_SET_TUM            0x00000020    /* Transmit Under-Run Error Interrupt Mask */
    155. 

  155. #define SPI_IMSK_SET_TCM            0x00000040    /* Transmit Collision Error Interrupt Mask */
    156. 

  156. #define SPI_IMSK_SET_MFM            0x00000080    /* Mode Fault Error Interrupt Mask */
    157. 

  157. #define SPI_IMSK_SET_RSM            0x00000100    /* Receive Start Interrupt Mask */
    158. 

  158. #define SPI_IMSK_SET_TSM            0x00000200    /* Transmit Start Interrupt Mask */
    159. 

  159. #define SPI_IMSK_SET_RFM            0x00000400    /* Receive Finish Interrupt Mask */
    160.