/*
 * OMAP4 CM instance functions
 *
 * Copyright (C) 2009 Nokia Corporation
 * Copyright (C) 2008-2011 Texas Instruments, Inc.
 * Paul Walmsley
 * Rajendra Nayak <rnayak@ti.com>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 *
 * This is needed since CM instances can be in the PRM, PRCM_MPU, CM1,
 * or CM2 hardware modules.  For example, the EMU_CM CM instance is in
 * the PRM hardware module.  What a mess...
 */

#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/io.h>

#include "iomap.h"
#include "common.h"
#include "clockdomain.h"
#include "cm.h"
#include "cm1_44xx.h"
#include "cm2_44xx.h"
#include "cm44xx.h"
#include "cminst44xx.h"
#include "cm-regbits-34xx.h"
#include "cm-regbits-44xx.h"
#include "prcm44xx.h"
#include "prm44xx.h"
#include "prcm_mpu44xx.h"
#include "prcm-common.h"

/*
 * CLKCTRL_IDLEST_*: possible values for the CM_*_CLKCTRL.IDLEST bitfield:
 *
 *   0x0 func:     Module is fully functional, including OCP
 *   0x1 trans:    Module is performing transition: wakeup, or sleep, or sleep
 *                 abortion
 *   0x2 idle:     Module is in Idle mode (only OCP part). It is functional if
 *                 using separate functional clock
 *   0x3 disabled: Module is disabled and cannot be accessed
 *
 */
#define CLKCTRL_IDLEST_FUNCTIONAL		0x0
#define CLKCTRL_IDLEST_INTRANSITION		0x1
#define CLKCTRL_IDLEST_INTERFACE_IDLE		0x2
#define CLKCTRL_IDLEST_DISABLED			0x3

static void __iomem *_cm_bases[OMAP4_MAX_PRCM_PARTITIONS];

/**
 * omap_cm_base_init - Populates the cm partitions
 *
 * Populates the base addresses of the _cm_bases
 * array used for read/write of cm module registers.
 */
void omap_cm_base_init(void)
{
	_cm_bases[OMAP4430_PRM_PARTITION] = prm_base;
	_cm_bases[OMAP4430_CM1_PARTITION] = cm_base;
	_cm_bases[OMAP4430_CM2_PARTITION] = cm2_base;
	_cm_bases[OMAP4430_PRCM_MPU_PARTITION] = prcm_mpu_base;
}

/* Private functions */

/**
 * _clkctrl_idlest - read a CM_*_CLKCTRL register; mask & shift IDLEST bitfield
 * @part: PRCM partition ID that the CM_CLKCTRL register exists in
 * @inst: CM instance register offset (*_INST macro)
 * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
 * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro)
 *
 * Return the IDLEST bitfield of a CM_*_CLKCTRL register, shifted down to
 * bit 0.
 */
static u32 _clkctrl_idlest(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs)
{
	u32 v = omap4_cminst_read_inst_reg(part, inst, clkctrl_offs);
	v &= OMAP4430_IDLEST_MASK;
	v >>= OMAP4430_IDLEST_SHIFT;
	return v;
}

/**
 * _is_module_ready - can module registers be accessed without causing an abort?
 * @part: PRCM partition ID that the CM_CLKCTRL register exists in
 * @inst: CM instance register offset (*_INST macro)
 * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
 * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro)
 *
 * Returns true if the module's CM_*_CLKCTRL.IDLEST bitfield is either
 * *FUNCTIONAL or *INTERFACE_IDLE; false otherwise.
 */
static bool _is_module_ready(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs)
{
	u32 v;

	v = _clkctrl_idlest(part, inst, cdoffs, clkctrl_offs);

	return (v == CLKCTRL_IDLEST_FUNCTIONAL ||
		v == CLKCTRL_IDLEST_INTERFACE_IDLE) ? true : false;
}

/* Public functions */

/* Read a register in a CM instance */
u32 omap4_cminst_read_inst_reg(u8 part, s16 inst, u16 idx)
{
	BUG_ON(part >= OMAP4_MAX_PRCM_PARTITIONS ||
	       part == OMAP4430_INVALID_PRCM_PARTITION ||
	       !_cm_bases[part]);
	return __raw_readl(_cm_bases[part] + inst + idx);
}

/* Write into a register in a CM instance */
void omap4_cminst_write_inst_reg(u32 val, u8 part, s16 inst, u16 idx)
{
	BUG_ON(part >= OMAP4_MAX_PRCM_PARTITIONS ||
	       part == OMAP4430_INVALID_PRCM_PARTITION ||
	       !_cm_bases[part]);
	__raw_writel(val, _cm_bases[part] + inst + idx);
}

/* Read-modify-write a register in CM1. Caller must lock */
u32 omap4_cminst_rmw_inst_reg_bits(u32 mask, u32 bits, u8 part, s16 inst,
				   s16 idx)
{
	u32 v;

	v = omap4_cminst_read_inst_reg(part, inst, idx);
	v &= ~mask;
	v |= bits;
	omap4_cminst_write_inst_reg(v, part, inst, idx);

	return v;
}

u32 omap4_cminst_set_inst_reg_bits(u32 bits, u8 part, s16 inst, s16 idx)
{
	return omap4_cminst_rmw_inst_reg_bits(bits, bits, part, inst, idx);
}

u32 omap4_cminst_clear_inst_reg_bits(u32 bits, u8 part, s16 inst, s16 idx)
{
	return omap4_cminst_rmw_inst_reg_bits(bits, 0x0, part, inst, idx);
}

u32 omap4_cminst_read_inst_reg_bits(u8 part, u16 inst, s16 idx, u32 mask)
{
	u32 v;

	v = omap4_cminst_read_inst_reg(part, inst, idx);
	v &= mask;
	v >>= __ffs(mask);

	return v;
}

/*
 *
 */

/**
 * _clktrctrl_write - write @c to a CM_CLKSTCTRL.CLKTRCTRL register bitfield
 * @c: CLKTRCTRL register bitfield (LSB = bit 0, i.e., unshifted)
 * @part: PRCM partition ID that the CM_CLKSTCTRL register exists in
 * @inst: CM instance register offset (*_INST macro)
 * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
 *
 * @c must be the unshifted value for CLKTRCTRL - i.e., this function
 * will handle the shift itself.
 */
static void _clktrctrl_write(u8 c, u8 part, s16 inst, u16 cdoffs)
{
	u32 v;

	v = omap4_cminst_read_inst_reg(part, inst, cdoffs + OMAP4_CM_CLKSTCTRL);
	v &= ~OMAP4430_CLKTRCTRL_MASK;
	v |= c << OMAP4430_CLKTRCTRL_SHIFT;
	omap4_cminst_write_inst_reg(v, part, inst, cdoffs + OMAP4_CM_CLKSTCTRL);