/* * arch/arm/mach-orion5x/dns323-setup.c * * Copyright (C) 2007 Herbert Valerio Riedel * * Support for HW Rev C1: * * Copyright (C) 2010 Benjamin Herrenschmidt * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU Lesser General Public License as * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "common.h" #include "mpp.h" /* Rev A1 and B1 */ #define DNS323_GPIO_LED_RIGHT_AMBER 1 #define DNS323_GPIO_LED_LEFT_AMBER 2 #define DNS323_GPIO_SYSTEM_UP 3 #define DNS323_GPIO_LED_POWER1 4 #define DNS323_GPIO_LED_POWER2 5 #define DNS323_GPIO_OVERTEMP 6 #define DNS323_GPIO_RTC 7 #define DNS323_GPIO_POWER_OFF 8 #define DNS323_GPIO_KEY_POWER 9 #define DNS323_GPIO_KEY_RESET 10 /* Rev C1 */ #define DNS323C_GPIO_KEY_POWER 1 #define DNS323C_GPIO_POWER_OFF 2 #define DNS323C_GPIO_LED_RIGHT_AMBER 8 #define DNS323C_GPIO_LED_LEFT_AMBER 9 #define DNS323C_GPIO_LED_POWER 17 #define DNS323C_GPIO_FAN_BIT1 18 #define DNS323C_GPIO_FAN_BIT0 19 /* Exposed to userspace, do not change */ enum { DNS323_REV_A1, /* 0 */ DNS323_REV_B1, /* 1 */ DNS323_REV_C1, /* 2 */ }; /**************************************************************************** * PCI setup */ static int __init dns323_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { int irq; /* * Check for devices with hard-wired IRQs. */ irq = orion5x_pci_map_irq(dev, slot, pin); if (irq != -1) return irq; return -1; } static struct hw_pci dns323_pci __initdata = { .nr_controllers = 2, .setup = orion5x_pci_sys_setup, .scan = orion5x_pci_sys_scan_bus, .map_irq = dns323_pci_map_irq, }; static int __init dns323_pci_init(void) { /* Rev B1 and C1 doesn't really use its PCI bus, and initialising PCI * gets in the way of initialising the SATA controller. */ if (machine_is_dns323() && system_rev == DNS323_REV_A1) pci_common_init(&dns323_pci); return 0; } subsys_initcall(dns323_pci_init); /**************************************************************************** * 8MiB NOR flash (Spansion S29GL064M90TFIR4) * * Layout as used by D-Link: * 0x00000000-0x00010000 : "MTD1" * 0x00010000-0x00020000 : "MTD2" * 0x00020000-0x001a0000 : "Linux Kernel" * 0x001a0000-0x007d0000 : "File System" * 0x007d0000-0x00800000 : "u-boot" */ #define DNS323_NOR_BOOT_BASE 0xf4000000 #define DNS323_NOR_BOOT_SIZE SZ_8M static struct mtd_partition dns323_partitions[] = { { .name = "MTD1", .size = 0x00010000, .offset = 0, }, { .name = "MTD2", .size = 0x00010000, .offset = 0x00010000, }, { .name = "Linux Kernel", .size = 0x00180000, .offset = 0x00020000, }, { .name = "File System", .size = 0x00630000, .offset = 0x001A0000, }, { .name = "u-boot", .size = 0x00030000, .offset = 0x007d0000, }, }; static struct physmap_flash_data dns323_nor_flash_data = { .width = 1, .parts = dns323_partitions, .nr_parts = ARRAY_SIZE(dns323_partitions) }; static struct resource dns323_nor_flash_resource = { .flags = IORESOURCE_MEM, .start = DNS323_NOR_BOOT_BASE, .end = DNS323_NOR_BOOT_BASE + DNS323_NOR_BOOT_SIZE - 1, }; static struct platform_device dns323_nor_flash = { .name = "physmap-flash", .id = 0, .dev = { .platform_data = &dns323_nor_flash_data, }, .resource = &dns323_nor_flash_resource, .num_resources = 1, }; /**************************************************************************** * Ethernet */ static struct mv643xx_eth_platform_data dns323_eth_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(8), }; /* dns323_parse_hex_*() taken from tsx09-common.c; should a common copy of these * functions be kept somewhere? */ static int __init dns323_parse_hex_nibble(char n) { if (n >= '0' && n <= '9') return n - '0'; if (n >= 'A' && n <= 'F') return n - 'A' + 10; if (n >= 'a' && n <= 'f') return n - 'a' + 10; return -1; } static int __init dns323_parse_hex_byte(const char *b) { int hi; int lo; hi = dns323_parse_hex_nibble(b[0]); lo = dns323_parse_hex_nibble(b[1]); if (hi < 0 || lo < 0) return -1; return (hi << 4) | lo; } static int __init dns323_read_mac_addr(void) { u_int8_t addr[6]; int i; char *mac_page; /* MAC address is stored as a regular ol' string in /dev/mtdblock4 * (0x007d0000-0x00800000) starting at offset 196480 (0x2ff80). */ mac_page = ioremap(DNS323_NOR_BOOT_BASE + 0x7d0000 + 196480, 1024); if (!mac_page) return -ENOMEM; /* Sanity check the string we're looking at */ for (i = 0; i < 5; i++) { if (*(mac_page + (i * 3) + 2) != ':') { goto error_fail; } } for (i = 0; i < 6; i++) { int byte; byte = dns323_parse_hex_byte(mac_page + (i * 3)); if (byte < 0) { goto error_fail; } addr[i] = byte; } iounmap(mac_page); printk("DNS-323: Found ethernet MAC address: "); for (i = 0; i < 6; i++) printk("%.2x%s", addr[i], (i < 5) ? ":" : ".\n"); memcpy(dns323_eth_data.mac_addr, addr, 6); return 0; error_fail: iounmap(mac_page); return -EINVAL; } /**************************************************************************** * GPIO LEDs (simple - doesn't use hardware blinking support) */ static struct gpio_led dns323ab_leds[] = { { .name = "power:blue", .gpio = DNS323_GPIO_LED_POWER2, .default_trigger = "default-on", }, { .name = "right:amber", .gpio = DNS323_GPIO_LED_RIGHT_AMBER, .active_low = 1, }, { .name = "left:amber", .gpio = DNS323_GPIO_LED_LEFT_AMBER, .active_low = 1, }, }; static struct gpio_led dns323c_leds[] = { { .name = "power:blue", .gpio = DNS323C_GPIO_LED_POWER, .default_trigger = "timer", .active_low = 1, }, { .name = "right:amber", .gpio = DNS323C_GPIO_LED_RIGHT_AMBER, .active_low = 1, }, { .name = "left:amber", .gpio = DNS323C_GPIO_LED_LEFT_AMBER, .active_low = 1, }, }; static struct gpio_led_platform_data dns323ab_led_data = { .num_leds = ARRAY_SIZE(dns323ab_leds), .leds = dns323ab_leds, .gpio_blink_set = orion_gpio_led_blink_set, };