waterDataStatistics functionDefinition.h 袁明明 commit at 2021-03-17

waterDataStatistics/alarmDataCalculation/functionDefinition.h

@@ -758,3 +758,192 @@
 
 /* Bit masks for ATAPI_ULTRA_TIM_2 */
 
+#define                       TSS  0xff       /* Selects time from STROBE edge to negation of DMARQ or assertion of STOP */
+#define                      TMLI  0xff00     /* Selects interlock time */
+
+/* Bit masks for ATAPI_ULTRA_TIM_3 */
+
+#define                      TZAH  0xff       /* Selects minimum delay required for output */
+#define               READY_PAUSE  0xff00     /* Selects ready to pause */
+
+/* Bit masks for TIMER_ENABLE1 */
+
+#define                    TIMEN8  0x1        /* Timer 8 Enable */
+#define                    TIMEN9  0x2        /* Timer 9 Enable */
+#define                   TIMEN10  0x4        /* Timer 10 Enable */
+
+/* Bit masks for TIMER_DISABLE1 */
+
+#define                   TIMDIS8  0x1        /* Timer 8 Disable */
+#define                   TIMDIS9  0x2        /* Timer 9 Disable */
+#define                  TIMDIS10  0x4        /* Timer 10 Disable */
+
+/* Bit masks for TIMER_STATUS1 */
+
+#define                    TIMIL8  0x1        /* Timer 8 Interrupt */
+#define                    TIMIL9  0x2        /* Timer 9 Interrupt */
+#define                   TIMIL10  0x4        /* Timer 10 Interrupt */
+#define                 TOVF_ERR8  0x10       /* Timer 8 Counter Overflow */
+#define                 TOVF_ERR9  0x20       /* Timer 9 Counter Overflow */
+#define                TOVF_ERR10  0x40       /* Timer 10 Counter Overflow */
+#define                     TRUN8  0x1000     /* Timer 8 Slave Enable Status */
+#define                     TRUN9  0x2000     /* Timer 9 Slave Enable Status */
+#define                    TRUN10  0x4000     /* Timer 10 Slave Enable Status */
+
+/* Bit masks for EPPI0 are obtained from common base header for EPPIx (EPPI1 and EPPI2) */
+
+/* Bit masks for USB_FADDR */
+
+#define          FUNCTION_ADDRESS  0x7f       /* Function address */
+
+/* Bit masks for USB_POWER */
+
+#define           ENABLE_SUSPENDM  0x1        /* enable SuspendM output */
+#define              SUSPEND_MODE  0x2        /* Suspend Mode indicator */
+#define               RESUME_MODE  0x4        /* DMA Mode */
+#define                     RESET  0x8        /* Reset indicator */
+#define                   HS_MODE  0x10       /* High Speed mode indicator */
+#define                 HS_ENABLE  0x20       /* high Speed Enable */
+#define                 SOFT_CONN  0x40       /* Soft connect */
+#define                ISO_UPDATE  0x80       /* Isochronous update */
+
+/* Bit masks for USB_INTRTX */
+
+#define                    EP0_TX  0x1        /* Tx Endpoint 0 interrupt */
+#define                    EP1_TX  0x2        /* Tx Endpoint 1 interrupt */
+#define                    EP2_TX  0x4        /* Tx Endpoint 2 interrupt */
+#define                    EP3_TX  0x8        /* Tx Endpoint 3 interrupt */
+#define                    EP4_TX  0x10       /* Tx Endpoint 4 interrupt */
+#define                    EP5_TX  0x20       /* Tx Endpoint 5 interrupt */
+#define                    EP6_TX  0x40       /* Tx Endpoint 6 interrupt */
+#define                    EP7_TX  0x80       /* Tx Endpoint 7 interrupt */
+
+/* Bit masks for USB_INTRRX */
+
+#define                    EP1_RX  0x2        /* Rx Endpoint 1 interrupt */
+#define                    EP2_RX  0x4        /* Rx Endpoint 2 interrupt */
+#define                    EP3_RX  0x8        /* Rx Endpoint 3 interrupt */
+#define                    EP4_RX  0x10       /* Rx Endpoint 4 interrupt */
+#define                    EP5_RX  0x20       /* Rx Endpoint 5 interrupt */
+#define                    EP6_RX  0x40       /* Rx Endpoint 6 interrupt */
+#define                    EP7_RX  0x80       /* Rx Endpoint 7 interrupt */
+
+/* Bit masks for USB_INTRTXE */
+
+#define                  EP0_TX_E  0x1        /* Endpoint 0 interrupt Enable */
+#define                  EP1_TX_E  0x2        /* Tx Endpoint 1 interrupt  Enable */
+#define                  EP2_TX_E  0x4        /* Tx Endpoint 2 interrupt  Enable */
+#define                  EP3_TX_E  0x8        /* Tx Endpoint 3 interrupt  Enable */
+#define                  EP4_TX_E  0x10       /* Tx Endpoint 4 interrupt  Enable */
+#define                  EP5_TX_E  0x20       /* Tx Endpoint 5 interrupt  Enable */
+#define                  EP6_TX_E  0x40       /* Tx Endpoint 6 interrupt  Enable */
+#define                  EP7_TX_E  0x80       /* Tx Endpoint 7 interrupt  Enable */
+
+/* Bit masks for USB_INTRRXE */
+
+#define                  EP1_RX_E  0x2        /* Rx Endpoint 1 interrupt  Enable */
+#define                  EP2_RX_E  0x4        /* Rx Endpoint 2 interrupt  Enable */
+#define                  EP3_RX_E  0x8        /* Rx Endpoint 3 interrupt  Enable */
+#define                  EP4_RX_E  0x10       /* Rx Endpoint 4 interrupt  Enable */
+#define                  EP5_RX_E  0x20       /* Rx Endpoint 5 interrupt  Enable */
+#define                  EP6_RX_E  0x40       /* Rx Endpoint 6 interrupt  Enable */
+#define                  EP7_RX_E  0x80       /* Rx Endpoint 7 interrupt  Enable */
+
+/* Bit masks for USB_INTRUSB */
+
+#define                 SUSPEND_B  0x1        /* Suspend indicator */
+#define                  RESUME_B  0x2        /* Resume indicator */
+#define          RESET_OR_BABLE_B  0x4        /* Reset/babble indicator */
+#define                     SOF_B  0x8        /* Start of frame */
+#define                    CONN_B  0x10       /* Connection indicator */
+#define                  DISCON_B  0x20       /* Disconnect indicator */
+#define             SESSION_REQ_B  0x40       /* Session Request */
+#define              VBUS_ERROR_B  0x80       /* Vbus threshold indicator */
+
+/* Bit masks for USB_INTRUSBE */
+
+#define                SUSPEND_BE  0x1        /* Suspend indicator int enable */
+#define                 RESUME_BE  0x2        /* Resume indicator int enable */
+#define         RESET_OR_BABLE_BE  0x4        /* Reset/babble indicator int enable */
+#define                    SOF_BE  0x8        /* Start of frame int enable */
+#define                   CONN_BE  0x10       /* Connection indicator int enable */
+#define                 DISCON_BE  0x20       /* Disconnect indicator int enable */
+#define            SESSION_REQ_BE  0x40       /* Session Request int enable */
+#define             VBUS_ERROR_BE  0x80       /* Vbus threshold indicator int enable */
+
+/* Bit masks for USB_FRAME */
+
+#define              FRAME_NUMBER  0x7ff      /* Frame number */
+
+/* Bit masks for USB_INDEX */
+
+#define         SELECTED_ENDPOINT  0xf        /* selected endpoint */
+
+/* Bit masks for USB_GLOBAL_CTL */
+
+#define                GLOBAL_ENA  0x1        /* enables USB module */
+#define                EP1_TX_ENA  0x2        /* Transmit endpoint 1 enable */
+#define                EP2_TX_ENA  0x4        /* Transmit endpoint 2 enable */
+#define                EP3_TX_ENA  0x8        /* Transmit endpoint 3 enable */
+#define                EP4_TX_ENA  0x10       /* Transmit endpoint 4 enable */
+#define                EP5_TX_ENA  0x20       /* Transmit endpoint 5 enable */
+#define                EP6_TX_ENA  0x40       /* Transmit endpoint 6 enable */
+#define                EP7_TX_ENA  0x80       /* Transmit endpoint 7 enable */
+#define                EP1_RX_ENA  0x100      /* Receive endpoint 1 enable */
+#define                EP2_RX_ENA  0x200      /* Receive endpoint 2 enable */
+#define                EP3_RX_ENA  0x400      /* Receive endpoint 3 enable */
+#define                EP4_RX_ENA  0x800      /* Receive endpoint 4 enable */
+#define                EP5_RX_ENA  0x1000     /* Receive endpoint 5 enable */
+#define                EP6_RX_ENA  0x2000     /* Receive endpoint 6 enable */
+#define                EP7_RX_ENA  0x4000     /* Receive endpoint 7 enable */
+
+/* Bit masks for USB_OTG_DEV_CTL */
+
+#define                   SESSION  0x1        /* session indicator */
+#define                  HOST_REQ  0x2        /* Host negotiation request */
+#define                 HOST_MODE  0x4        /* indicates USBDRC is a host */
+#define                     VBUS0  0x8        /* Vbus level indicator[0] */
+#define                     VBUS1  0x10       /* Vbus level indicator[1] */
+#define                     LSDEV  0x20       /* Low-speed indicator */
+#define                     FSDEV  0x40       /* Full or High-speed indicator */
+#define                  B_DEVICE  0x80       /* A' or 'B' device indicator */
+
+/* Bit masks for USB_OTG_VBUS_IRQ */
+
+#define             DRIVE_VBUS_ON  0x1        /* indicator to drive VBUS control circuit */
+#define            DRIVE_VBUS_OFF  0x2        /* indicator to shut off charge pump */
+#define           CHRG_VBUS_START  0x4        /* indicator for external circuit to start charging VBUS */
+#define             CHRG_VBUS_END  0x8        /* indicator for external circuit to end charging VBUS */
+#define        DISCHRG_VBUS_START  0x10       /* indicator to start discharging VBUS */
+#define          DISCHRG_VBUS_END  0x20       /* indicator to stop discharging VBUS */
+
+/* Bit masks for USB_OTG_VBUS_MASK */
+
+#define         DRIVE_VBUS_ON_ENA  0x1        /* enable DRIVE_VBUS_ON interrupt */
+#define        DRIVE_VBUS_OFF_ENA  0x2        /* enable DRIVE_VBUS_OFF interrupt */
+#define       CHRG_VBUS_START_ENA  0x4        /* enable CHRG_VBUS_START interrupt */
+#define         CHRG_VBUS_END_ENA  0x8        /* enable CHRG_VBUS_END interrupt */
+#define    DISCHRG_VBUS_START_ENA  0x10       /* enable DISCHRG_VBUS_START interrupt */
+#define      DISCHRG_VBUS_END_ENA  0x20       /* enable DISCHRG_VBUS_END interrupt */
+
+/* Bit masks for USB_CSR0 */
+
+#define                  RXPKTRDY  0x1        /* data packet receive indicator */
+#define                  TXPKTRDY  0x2        /* data packet in FIFO indicator */
+#define                STALL_SENT  0x4        /* STALL handshake sent */
+#define                   DATAEND  0x8        /* Data end indicator */
+#define                  SETUPEND  0x10       /* Setup end */
+#define                 SENDSTALL  0x20       /* Send STALL handshake */
+#define         SERVICED_RXPKTRDY  0x40       /* used to clear the RxPktRdy bit */
+#define         SERVICED_SETUPEND  0x80       /* used to clear the SetupEnd bit */
+#define                 FLUSHFIFO  0x100      /* flush endpoint FIFO */
+#define          STALL_RECEIVED_H  0x4        /* STALL handshake received host mode */
+#define                SETUPPKT_H  0x8        /* send Setup token host mode */
+#define                   ERROR_H  0x10       /* timeout error indicator host mode */
+#define                  REQPKT_H  0x20       /* Request an IN transaction host mode */
+#define               STATUSPKT_H  0x40       /* Status stage transaction host mode */
+#define             NAK_TIMEOUT_H  0x80       /* EP0 halted after a NAK host mode */
+
+/* Bit masks for USB_COUNT0 */
+
+#define              EP0_RX_COUNT  0x7f       /* number of received bytes in EP0 FIFO */