efHotAgingTrendMining dataMonitoring.c 韩正义 commit at 2020-09-04

efHotAgingTrendMining/externalListeningThread/dataMonitoring.c

@@ -0,0 +1,136 @@
+/*
+ * board-overo.c (Gumstix Overo)
+ *
+ * Initial code: Steve Sakoman <steve@sakoman.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/i2c/twl.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
+#include <linux/spi/spi.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mmc/host.h>
+
+#include <linux/platform_data/mtd-nand-omap2.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+#include <asm/mach/map.h>
+
+#include <video/omapdss.h>
+#include <video/omap-panel-generic-dpi.h>
+#include <video/omap-panel-tfp410.h>
+
+#include "common.h"
+#include "mux.h"
+#include "sdram-micron-mt46h32m32lf-6.h"
+#include "gpmc.h"
+#include "hsmmc.h"
+#include "board-flash.h"
+#include "common-board-devices.h"
+
+#define	NAND_CS			0
+
+#define OVERO_GPIO_BT_XGATE	15
+#define OVERO_GPIO_W2W_NRESET	16
+#define OVERO_GPIO_PENDOWN	114
+#define OVERO_GPIO_BT_NRESET	164
+#define OVERO_GPIO_USBH_CPEN	168
+#define OVERO_GPIO_USBH_NRESET	183
+
+#define OVERO_SMSC911X_CS      5
+#define OVERO_SMSC911X_GPIO    176
+#define OVERO_SMSC911X2_CS     4
+#define OVERO_SMSC911X2_GPIO   65
+
+#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
+	defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
+
+/* fixed regulator for ads7846 */
+static struct regulator_consumer_supply ads7846_supply[] = {
+	REGULATOR_SUPPLY("vcc", "spi1.0"),
+};
+
+static struct regulator_init_data vads7846_regulator = {
+	.constraints = {
+		.valid_ops_mask		= REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(ads7846_supply),
+	.consumer_supplies	= ads7846_supply,
+};
+
+static struct fixed_voltage_config vads7846 = {
+	.supply_name		= "vads7846",
+	.microvolts		= 3300000, /* 3.3V */
+	.gpio			= -EINVAL,
+	.startup_delay		= 0,
+	.init_data		= &vads7846_regulator,
+};
+
+static struct platform_device vads7846_device = {
+	.name		= "reg-fixed-voltage",
+	.id		= 1,
+	.dev = {
+		.platform_data = &vads7846,
+	},
+};
+
+static void __init overo_ads7846_init(void)
+{
+	omap_ads7846_init(1, OVERO_GPIO_PENDOWN, 0, NULL);
+	platform_device_register(&vads7846_device);
+}
+
+#else
+static inline void __init overo_ads7846_init(void) { return; }
+#endif
+
+#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+
+#include <linux/smsc911x.h>
+#include "gpmc-smsc911x.h"
+
+static struct omap_smsc911x_platform_data smsc911x_cfg = {
+	.id		= 0,
+	.cs             = OVERO_SMSC911X_CS,
+	.gpio_irq       = OVERO_SMSC911X_GPIO,
+	.gpio_reset     = -EINVAL,
+	.flags		= SMSC911X_USE_32BIT,
+};
+
+static struct omap_smsc911x_platform_data smsc911x2_cfg = {
+	.id		= 1,
+	.cs             = OVERO_SMSC911X2_CS,
+	.gpio_irq       = OVERO_SMSC911X2_GPIO,
+	.gpio_reset     = -EINVAL,
+	.flags		= SMSC911X_USE_32BIT,
+};
+