waterDataPreprocessing levelDataPreprocessingThread.h 李欣儒 commit at 2021-03-17

waterDataPreprocessing/dataProcessing/levelDataPreprocessingThread.h

@@ -1458,3 +1458,202 @@
 #define	CLK_SEL			0x0080
 #define	TOGGLE_HI		0x0100
 #define	EMU_RUN			0x0200
+#ifdef _MISRA_RULES
+#define	ERR_TYP(x)		(((x) &	0x03u) << 14)
+#else
+#define	ERR_TYP(x)		(((x) &	0x03) << 14)
+#endif /* _MISRA_RULES */
+
+#define	TMODE_P0		0x00
+#define	TMODE_P1		0x01
+#define	PULSE_HI_P		0x02
+#define	PERIOD_CNT_P	0x03
+#define	IRQ_ENA_P		0x04
+#define	TIN_SEL_P		0x05
+#define	OUT_DIS_P		0x06
+#define	CLK_SEL_P		0x07
+#define	TOGGLE_HI_P		0x08
+#define	EMU_RUN_P		0x09
+#define	ERR_TYP_P0		0x0E
+#define	ERR_TYP_P1		0x0F
+
+/* *********************  ASYNCHRONOUS MEMORY CONTROLLER MASKS	************* */
+/* EBIU_AMGCTL Masks */
+#define	AMCKEN		0x0001	/* Enable CLKOUT */
+#define	AMBEN_NONE	0x0000	/* All Banks Disabled */
+#define	AMBEN_B0	0x0002	/* Enable Asynchronous Memory Bank 0 only */
+#define	AMBEN_B0_B1	0x0004	/* Enable Asynchronous Memory Banks 0 &	1 only */
+#define	AMBEN_B0_B1_B2	0x0006	/* Enable Asynchronous Memory Banks 0, 1, and 2 */
+#define	AMBEN_ALL	0x0008	/* Enable Asynchronous Memory Banks (all) 0, 1,	2, and 3 */
+#define	CDPRIO		0x0100	/* DMA has priority over core for external accesses */
+
+/* EBIU_AMGCTL Bit Positions */
+#define	AMCKEN_P		0x0000	/* Enable CLKOUT */
+#define	AMBEN_P0		0x0001	/* Asynchronous	Memory Enable, 000 - banks 0-3 disabled, 001 - Bank 0 enabled */
+#define	AMBEN_P1		0x0002	/* Asynchronous	Memory Enable, 010 - banks 0&1 enabled,	 011 - banks 0-3 enabled */
+#define	AMBEN_P2		0x0003	/* Asynchronous	Memory Enable, 1xx - All banks (bank 0,	1, 2, and 3) enabled */
+
+/* EBIU_AMBCTL0	Masks */
+#define	B0RDYEN			0x00000001  /* Bank 0 RDY Enable, 0=disable, 1=enable */
+#define	B0RDYPOL		0x00000002  /* Bank 0 RDY Active high, 0=active	low, 1=active high */
+#define	B0TT_1			0x00000004  /* Bank 0 Transition Time from Read	to Write = 1 cycle */
+#define	B0TT_2			0x00000008  /* Bank 0 Transition Time from Read	to Write = 2 cycles */
+#define	B0TT_3			0x0000000C  /* Bank 0 Transition Time from Read	to Write = 3 cycles */
+#define	B0TT_4			0x00000000  /* Bank 0 Transition Time from Read	to Write = 4 cycles */
+#define	B0ST_1			0x00000010  /* Bank 0 Setup Time from AOE asserted to Read/Write asserted=1 cycle */
+#define	B0ST_2			0x00000020  /* Bank 0 Setup Time from AOE asserted to Read/Write asserted=2 cycles */
+#define	B0ST_3			0x00000030  /* Bank 0 Setup Time from AOE asserted to Read/Write asserted=3 cycles */
+#define	B0ST_4			0x00000000  /* Bank 0 Setup Time from AOE asserted to Read/Write asserted=4 cycles */
+#define	B0HT_1			0x00000040  /* Bank 0 Hold Time	from Read/Write	deasserted to AOE deasserted = 1 cycle */
+#define	B0HT_2			0x00000080  /* Bank 0 Hold Time	from Read/Write	deasserted to AOE deasserted = 2 cycles */
+#define	B0HT_3			0x000000C0  /* Bank 0 Hold Time	from Read/Write	deasserted to AOE deasserted = 3 cycles */
+#define	B0HT_0			0x00000000  /* Bank 0 Hold Time	from Read/Write	deasserted to AOE deasserted = 0 cycles */
+#define	B0RAT_1			0x00000100  /* Bank 0 Read Access Time = 1 cycle */
+#define	B0RAT_2			0x00000200  /* Bank 0 Read Access Time = 2 cycles */
+#define	B0RAT_3			0x00000300  /* Bank 0 Read Access Time = 3 cycles */
+#define	B0RAT_4			0x00000400  /* Bank 0 Read Access Time = 4 cycles */
+#define	B0RAT_5			0x00000500  /* Bank 0 Read Access Time = 5 cycles */
+#define	B0RAT_6			0x00000600  /* Bank 0 Read Access Time = 6 cycles */
+#define	B0RAT_7			0x00000700  /* Bank 0 Read Access Time = 7 cycles */
+#define	B0RAT_8			0x00000800  /* Bank 0 Read Access Time = 8 cycles */
+#define	B0RAT_9			0x00000900  /* Bank 0 Read Access Time = 9 cycles */
+#define	B0RAT_10		0x00000A00  /* Bank 0 Read Access Time = 10 cycles */
+#define	B0RAT_11		0x00000B00  /* Bank 0 Read Access Time = 11 cycles */
+#define	B0RAT_12		0x00000C00  /* Bank 0 Read Access Time = 12 cycles */
+#define	B0RAT_13		0x00000D00  /* Bank 0 Read Access Time = 13 cycles */
+#define	B0RAT_14		0x00000E00  /* Bank 0 Read Access Time = 14 cycles */
+#define	B0RAT_15		0x00000F00  /* Bank 0 Read Access Time = 15 cycles */
+#define	B0WAT_1			0x00001000  /* Bank 0 Write Access Time	= 1 cycle */
+#define	B0WAT_2			0x00002000  /* Bank 0 Write Access Time	= 2 cycles */
+#define	B0WAT_3			0x00003000  /* Bank 0 Write Access Time	= 3 cycles */
+#define	B0WAT_4			0x00004000  /* Bank 0 Write Access Time	= 4 cycles */
+#define	B0WAT_5			0x00005000  /* Bank 0 Write Access Time	= 5 cycles */
+#define	B0WAT_6			0x00006000  /* Bank 0 Write Access Time	= 6 cycles */
+#define	B0WAT_7			0x00007000  /* Bank 0 Write Access Time	= 7 cycles */
+#define	B0WAT_8			0x00008000  /* Bank 0 Write Access Time	= 8 cycles */
+#define	B0WAT_9			0x00009000  /* Bank 0 Write Access Time	= 9 cycles */
+#define	B0WAT_10		0x0000A000  /* Bank 0 Write Access Time	= 10 cycles */
+#define	B0WAT_11		0x0000B000  /* Bank 0 Write Access Time	= 11 cycles */
+#define	B0WAT_12		0x0000C000  /* Bank 0 Write Access Time	= 12 cycles */
+#define	B0WAT_13		0x0000D000  /* Bank 0 Write Access Time	= 13 cycles */
+#define	B0WAT_14		0x0000E000  /* Bank 0 Write Access Time	= 14 cycles */
+#define	B0WAT_15		0x0000F000  /* Bank 0 Write Access Time	= 15 cycles */
+#define	B1RDYEN			0x00010000  /* Bank 1 RDY enable, 0=disable, 1=enable */
+#define	B1RDYPOL		0x00020000  /* Bank 1 RDY Active high, 0=active	low, 1=active high */
+#define	B1TT_1			0x00040000  /* Bank 1 Transition Time from Read	to Write = 1 cycle */
+#define	B1TT_2			0x00080000  /* Bank 1 Transition Time from Read	to Write = 2 cycles */
+#define	B1TT_3			0x000C0000  /* Bank 1 Transition Time from Read	to Write = 3 cycles */
+#define	B1TT_4			0x00000000  /* Bank 1 Transition Time from Read	to Write = 4 cycles */
+#define	B1ST_1			0x00100000  /* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 1 cycle */
+#define	B1ST_2			0x00200000  /* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 2 cycles */
+#define	B1ST_3			0x00300000  /* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 3 cycles */
+#define	B1ST_4			0x00000000  /* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 4 cycles */
+#define	B1HT_1			0x00400000  /* Bank 1 Hold Time	from Read or Write deasserted to AOE deasserted	= 1 cycle */
+#define	B1HT_2			0x00800000  /* Bank 1 Hold Time	from Read or Write deasserted to AOE deasserted	= 2 cycles */
+#define	B1HT_3			0x00C00000  /* Bank 1 Hold Time	from Read or Write deasserted to AOE deasserted	= 3 cycles */
+#define	B1HT_0			0x00000000  /* Bank 1 Hold Time	from Read or Write deasserted to AOE deasserted	= 0 cycles */
+#define	B1RAT_1			0x01000000  /* Bank 1 Read Access Time = 1 cycle */
+#define	B1RAT_2			0x02000000  /* Bank 1 Read Access Time = 2 cycles */
+#define	B1RAT_3			0x03000000  /* Bank 1 Read Access Time = 3 cycles */
+#define	B1RAT_4			0x04000000  /* Bank 1 Read Access Time = 4 cycles */
+#define	B1RAT_5			0x05000000  /* Bank 1 Read Access Time = 5 cycles */
+#define	B1RAT_6			0x06000000  /* Bank 1 Read Access Time = 6 cycles */
+#define	B1RAT_7			0x07000000  /* Bank 1 Read Access Time = 7 cycles */
+#define	B1RAT_8			0x08000000  /* Bank 1 Read Access Time = 8 cycles */
+#define	B1RAT_9			0x09000000  /* Bank 1 Read Access Time = 9 cycles */
+#define	B1RAT_10		0x0A000000  /* Bank 1 Read Access Time = 10 cycles */
+#define	B1RAT_11		0x0B000000  /* Bank 1 Read Access Time = 11 cycles */
+#define	B1RAT_12		0x0C000000  /* Bank 1 Read Access Time = 12 cycles */
+#define	B1RAT_13		0x0D000000  /* Bank 1 Read Access Time = 13 cycles */
+#define	B1RAT_14		0x0E000000  /* Bank 1 Read Access Time = 14 cycles */
+#define	B1RAT_15		0x0F000000  /* Bank 1 Read Access Time = 15 cycles */
+#define	B1WAT_1			0x10000000 /* Bank 1 Write Access Time = 1 cycle */
+#define	B1WAT_2			0x20000000  /* Bank 1 Write Access Time	= 2 cycles */
+#define	B1WAT_3			0x30000000  /* Bank 1 Write Access Time	= 3 cycles */
+#define	B1WAT_4			0x40000000  /* Bank 1 Write Access Time	= 4 cycles */
+#define	B1WAT_5			0x50000000  /* Bank 1 Write Access Time	= 5 cycles */
+#define	B1WAT_6			0x60000000  /* Bank 1 Write Access Time	= 6 cycles */
+#define	B1WAT_7			0x70000000  /* Bank 1 Write Access Time	= 7 cycles */
+#define	B1WAT_8			0x80000000  /* Bank 1 Write Access Time	= 8 cycles */
+#define	B1WAT_9			0x90000000  /* Bank 1 Write Access Time	= 9 cycles */
+#define	B1WAT_10		0xA0000000  /* Bank 1 Write Access Time	= 10 cycles */
+#define	B1WAT_11		0xB0000000  /* Bank 1 Write Access Time	= 11 cycles */
+#define	B1WAT_12		0xC0000000  /* Bank 1 Write Access Time	= 12 cycles */
+#define	B1WAT_13		0xD0000000  /* Bank 1 Write Access Time	= 13 cycles */
+#define	B1WAT_14		0xE0000000  /* Bank 1 Write Access Time	= 14 cycles */
+#define	B1WAT_15		0xF0000000  /* Bank 1 Write Access Time	= 15 cycles */
+
+/* EBIU_AMBCTL1	Masks */
+#define	B2RDYEN			0x00000001  /* Bank 2 RDY Enable, 0=disable, 1=enable */
+#define	B2RDYPOL		0x00000002  /* Bank 2 RDY Active high, 0=active	low, 1=active high */
+#define	B2TT_1			0x00000004  /* Bank 2 Transition Time from Read	to Write = 1 cycle */
+#define	B2TT_2			0x00000008  /* Bank 2 Transition Time from Read	to Write = 2 cycles */
+#define	B2TT_3			0x0000000C  /* Bank 2 Transition Time from Read	to Write = 3 cycles */
+#define	B2TT_4			0x00000000  /* Bank 2 Transition Time from Read	to Write = 4 cycles */
+#define	B2ST_1			0x00000010  /* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 1 cycle */
+#define	B2ST_2			0x00000020  /* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 2 cycles */
+#define	B2ST_3			0x00000030  /* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 3 cycles */
+#define	B2ST_4			0x00000000  /* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 4 cycles */
+#define	B2HT_1			0x00000040  /* Bank 2 Hold Time	from Read or Write deasserted to AOE deasserted	= 1 cycle */
+#define	B2HT_2			0x00000080  /* Bank 2 Hold Time	from Read or Write deasserted to AOE deasserted	= 2 cycles */
+#define	B2HT_3			0x000000C0  /* Bank 2 Hold Time	from Read or Write deasserted to AOE deasserted	= 3 cycles */
+#define	B2HT_0			0x00000000  /* Bank 2 Hold Time	from Read or Write deasserted to AOE deasserted	= 0 cycles */
+#define	B2RAT_1			0x00000100  /* Bank 2 Read Access Time = 1 cycle */
+#define	B2RAT_2			0x00000200  /* Bank 2 Read Access Time = 2 cycles */
+#define	B2RAT_3			0x00000300  /* Bank 2 Read Access Time = 3 cycles */
+#define	B2RAT_4			0x00000400  /* Bank 2 Read Access Time = 4 cycles */
+#define	B2RAT_5			0x00000500  /* Bank 2 Read Access Time = 5 cycles */
+#define	B2RAT_6			0x00000600  /* Bank 2 Read Access Time = 6 cycles */
+#define	B2RAT_7			0x00000700  /* Bank 2 Read Access Time = 7 cycles */
+#define	B2RAT_8			0x00000800  /* Bank 2 Read Access Time = 8 cycles */
+#define	B2RAT_9			0x00000900  /* Bank 2 Read Access Time = 9 cycles */
+#define	B2RAT_10		0x00000A00  /* Bank 2 Read Access Time = 10 cycles */
+#define	B2RAT_11		0x00000B00  /* Bank 2 Read Access Time = 11 cycles */
+#define	B2RAT_12		0x00000C00  /* Bank 2 Read Access Time = 12 cycles */
+#define	B2RAT_13		0x00000D00  /* Bank 2 Read Access Time = 13 cycles */
+#define	B2RAT_14		0x00000E00  /* Bank 2 Read Access Time = 14 cycles */
+#define	B2RAT_15		0x00000F00  /* Bank 2 Read Access Time = 15 cycles */
+#define	B2WAT_1			0x00001000  /* Bank 2 Write Access Time	= 1 cycle */
+#define	B2WAT_2			0x00002000  /* Bank 2 Write Access Time	= 2 cycles */
+#define	B2WAT_3			0x00003000  /* Bank 2 Write Access Time	= 3 cycles */
+#define	B2WAT_4			0x00004000  /* Bank 2 Write Access Time	= 4 cycles */
+#define	B2WAT_5			0x00005000  /* Bank 2 Write Access Time	= 5 cycles */
+#define	B2WAT_6			0x00006000  /* Bank 2 Write Access Time	= 6 cycles */
+#define	B2WAT_7			0x00007000  /* Bank 2 Write Access Time	= 7 cycles */
+#define	B2WAT_8			0x00008000  /* Bank 2 Write Access Time	= 8 cycles */
+#define	B2WAT_9			0x00009000  /* Bank 2 Write Access Time	= 9 cycles */
+#define	B2WAT_10		0x0000A000  /* Bank 2 Write Access Time	= 10 cycles */
+#define	B2WAT_11		0x0000B000  /* Bank 2 Write Access Time	= 11 cycles */
+#define	B2WAT_12		0x0000C000  /* Bank 2 Write Access Time	= 12 cycles */
+#define	B2WAT_13		0x0000D000  /* Bank 2 Write Access Time	= 13 cycles */
+#define	B2WAT_14		0x0000E000  /* Bank 2 Write Access Time	= 14 cycles */
+#define	B2WAT_15		0x0000F000  /* Bank 2 Write Access Time	= 15 cycles */
+#define	B3RDYEN			0x00010000  /* Bank 3 RDY enable, 0=disable, 1=enable */
+#define	B3RDYPOL		0x00020000  /* Bank 3 RDY Active high, 0=active	low, 1=active high */
+#define	B3TT_1			0x00040000  /* Bank 3 Transition Time from Read	to Write = 1 cycle */
+#define	B3TT_2			0x00080000  /* Bank 3 Transition Time from Read	to Write = 2 cycles */
+#define	B3TT_3			0x000C0000  /* Bank 3 Transition Time from Read	to Write = 3 cycles */
+#define	B3TT_4			0x00000000  /* Bank 3 Transition Time from Read	to Write = 4 cycles */
+#define	B3ST_1			0x00100000  /* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 1 cycle */
+#define	B3ST_2			0x00200000  /* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 2 cycles */
+#define	B3ST_3			0x00300000  /* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 3 cycles */
+#define	B3ST_4			0x00000000  /* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 4 cycles */
+#define	B3HT_1			0x00400000  /* Bank 3 Hold Time	from Read or Write deasserted to AOE deasserted	= 1 cycle */
+#define	B3HT_2			0x00800000  /* Bank 3 Hold Time	from Read or Write deasserted to AOE deasserted	= 2 cycles */
+#define	B3HT_3			0x00C00000  /* Bank 3 Hold Time	from Read or Write deasserted to AOE deasserted	= 3 cycles */
+#define	B3HT_0			0x00000000  /* Bank 3 Hold Time	from Read or Write deasserted to AOE deasserted	= 0 cycles */
+#define	B3RAT_1			0x01000000 /* Bank 3 Read Access Time =	1 cycle */
+#define	B3RAT_2			0x02000000  /* Bank 3 Read Access Time = 2 cycles */
+#define	B3RAT_3			0x03000000  /* Bank 3 Read Access Time = 3 cycles */
+#define	B3RAT_4			0x04000000  /* Bank 3 Read Access Time = 4 cycles */
+#define	B3RAT_5			0x05000000  /* Bank 3 Read Access Time = 5 cycles */
+#define	B3RAT_6			0x06000000  /* Bank 3 Read Access Time = 6 cycles */
+#define	B3RAT_7			0x07000000  /* Bank 3 Read Access Time = 7 cycles */
+#define	B3RAT_8			0x08000000  /* Bank 3 Read Access Time = 8 cycles */
+#define	B3RAT_9			0x09000000  /* Bank 3 Read Access Time = 9 cycles */
+#define	B3RAT_10		0x0A000000  /* Bank 3 Read Access Time = 10 cycles */
+#define	B3RAT_11		0x0B000000  /* Bank 3 Read Access Time = 11 cycles */
+#define	B3RAT_12		0x0C000000  /* Bank 3 Read Access Time = 12 cycles */
+#define	B3RAT_13		0x0D000000  /* Bank 3 Read Access Time = 13 cycles */
+#define	B3RAT_14		0x0E000000  /* Bank 3 Read Access Time = 14 cycles */
+#define	B3RAT_15		0x0F000000  /* Bank 3 Read Access Time = 15 cycles */