waterDataFluctuationCorrelation hiddenDangerAnalysis.c 吉超博 commit at 2021-04-12

waterDataFluctuationCorrelation/fluctuationCorrelationOfSprayEnd/hiddenDangerAnalysis.c

@@ -1525,3 +1525,83 @@ static __init void da850_evm_init(void)
 	ret = da8xx_register_uio_pruss();
 	if (ret)
 		pr_warn("da850_evm_init: pruss initialization failed: %d\n",
+				ret);
+
+	/* Handle board specific muxing for LCD here */
+	ret = davinci_cfg_reg_list(da850_evm_lcdc_pins);
+	if (ret)
+		pr_warning("da850_evm_init: evm specific lcd mux setup "
+				"failed: %d\n",	ret);
+
+	ret = da850_lcd_hw_init();
+	if (ret)
+		pr_warning("da850_evm_init: lcd initialization failed: %d\n",
+				ret);
+
+	sharp_lk043t1dg01_pdata.panel_power_ctrl = da850_panel_power_ctrl,
+	ret = da8xx_register_lcdc(&sharp_lk043t1dg01_pdata);
+	if (ret)
+		pr_warning("da850_evm_init: lcdc registration failed: %d\n",
+				ret);
+
+	ret = da8xx_register_rtc();
+	if (ret)
+		pr_warning("da850_evm_init: rtc setup failed: %d\n", ret);
+
+	ret = da850_evm_init_cpufreq();
+	if (ret)
+		pr_warning("da850_evm_init: cpufreq registration failed: %d\n",
+				ret);
+
+	ret = da8xx_register_cpuidle();
+	if (ret)
+		pr_warning("da850_evm_init: cpuidle registration failed: %d\n",
+				ret);
+
+	ret = da850_register_pm(&da850_pm_device);
+	if (ret)
+		pr_warning("da850_evm_init: suspend registration failed: %d\n",
+				ret);
+
+	da850_vpif_init();
+
+	ret = da8xx_register_spi(1, da850evm_spi_info,
+				 ARRAY_SIZE(da850evm_spi_info));
+	if (ret)
+		pr_warning("da850_evm_init: spi 1 registration failed: %d\n",
+				ret);
+
+	ret = da850_register_sata(DA850EVM_SATA_REFCLKPN_RATE);
+	if (ret)
+		pr_warning("da850_evm_init: sata registration failed: %d\n",
+				ret);
+
+	da850_evm_setup_mac_addr();
+}
+
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+static int __init da850_evm_console_init(void)
+{
+	if (!machine_is_davinci_da850_evm())
+		return 0;
+
+	return add_preferred_console("ttyS", 2, "115200");
+}
+console_initcall(da850_evm_console_init);
+#endif
+
+static void __init da850_evm_map_io(void)
+{
+	da850_init();
+}
+
+MACHINE_START(DAVINCI_DA850_EVM, "DaVinci DA850/OMAP-L138/AM18x EVM")
+	.atag_offset	= 0x100,
+	.map_io		= da850_evm_map_io,
+	.init_irq	= cp_intc_init,
+	.timer		= &davinci_timer,
+	.init_machine	= da850_evm_init,
+	.init_late	= davinci_init_late,
+	.dma_zone_size	= SZ_128M,
+	.restart	= da8xx_restart,
+MACHINE_END