waterDataDiscreteRateMining averageMemoryDefinition.c 邵敏 commit at 2020-12-08

waterDataDiscreteRateMining/dataSharedMemory/averageMemoryDefinition.c

@@ -239,3 +239,171 @@ static struct pxafb_mach_info balloon3_lcd_screen = {
 static void balloon3_backlight_power(int on)
 {
 	gpio_set_value(BALLOON3_GPIO_RUN_BACKLIGHT, on);
+}
+
+static void __init balloon3_lcd_init(void)
+{
+	int ret;
+
+	if (!balloon3_has(BALLOON3_FEATURE_TOPPOLY))
+		return;
+
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_lcd_pin_config));
+
+	ret = gpio_request(BALLOON3_GPIO_RUN_BACKLIGHT, "BKL-ON");
+	if (ret) {
+		pr_err("Requesting BKL-ON GPIO failed!\n");
+		goto err;
+	}
+
+	ret = gpio_direction_output(BALLOON3_GPIO_RUN_BACKLIGHT, 1);
+	if (ret) {
+		pr_err("Setting BKL-ON GPIO direction failed!\n");
+		goto err2;
+	}
+
+	balloon3_lcd_screen.pxafb_backlight_power = balloon3_backlight_power;
+	pxa_set_fb_info(NULL, &balloon3_lcd_screen);
+	return;
+
+err2:
+	gpio_free(BALLOON3_GPIO_RUN_BACKLIGHT);
+err:
+	return;
+}
+#else
+static inline void balloon3_lcd_init(void) {}
+#endif
+
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
+static unsigned long balloon3_mmc_pin_config[] __initdata = {
+	GPIO32_MMC_CLK,
+	GPIO92_MMC_DAT_0,
+	GPIO109_MMC_DAT_1,
+	GPIO110_MMC_DAT_2,
+	GPIO111_MMC_DAT_3,
+	GPIO112_MMC_CMD,
+};
+
+static struct pxamci_platform_data balloon3_mci_platform_data = {
+	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.gpio_card_detect	= -1,
+	.gpio_card_ro		= -1,
+	.gpio_power		= -1,
+	.detect_delay_ms	= 200,
+};
+
+static void __init balloon3_mmc_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_mmc_pin_config));
+	pxa_set_mci_info(&balloon3_mci_platform_data);
+}
+#else
+static inline void balloon3_mmc_init(void) {}
+#endif
+
+/******************************************************************************
+ * USB Gadget
+ ******************************************************************************/
+#if defined(CONFIG_USB_PXA27X)||defined(CONFIG_USB_PXA27X_MODULE)
+static void balloon3_udc_command(int cmd)
+{
+	if (cmd == PXA2XX_UDC_CMD_CONNECT)
+		UP2OCR |= UP2OCR_DPPUE | UP2OCR_DPPUBE;
+	else if (cmd == PXA2XX_UDC_CMD_DISCONNECT)
+		UP2OCR &= ~UP2OCR_DPPUE;
+}
+
+static int balloon3_udc_is_connected(void)
+{
+	return 1;
+}
+
+static struct pxa2xx_udc_mach_info balloon3_udc_info __initdata = {
+	.udc_command		= balloon3_udc_command,
+	.udc_is_connected	= balloon3_udc_is_connected,
+	.gpio_pullup		= -1,
+};
+
+static void __init balloon3_udc_init(void)
+{
+	pxa_set_udc_info(&balloon3_udc_info);
+	platform_device_register(&balloon3_gpio_vbus);
+}
+#else
+static inline void balloon3_udc_init(void) {}
+#endif
+
+/******************************************************************************
+ * IrDA
+ ******************************************************************************/
+#if defined(CONFIG_IRDA) || defined(CONFIG_IRDA_MODULE)
+static struct pxaficp_platform_data balloon3_ficp_platform_data = {
+	.transceiver_cap	= IR_FIRMODE | IR_SIRMODE | IR_OFF,
+};
+
+static void __init balloon3_irda_init(void)
+{
+	pxa_set_ficp_info(&balloon3_ficp_platform_data);
+}
+#else
+static inline void balloon3_irda_init(void) {}
+#endif
+
+/******************************************************************************
+ * USB Host
+ ******************************************************************************/
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static unsigned long balloon3_uhc_pin_config[] __initdata = {
+	GPIO88_USBH1_PWR,
+	GPIO89_USBH1_PEN,
+};
+
+static struct pxaohci_platform_data balloon3_ohci_info = {
+	.port_mode	= PMM_PERPORT_MODE,
+	.flags		= ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
+};
+
+static void __init balloon3_uhc_init(void)
+{
+	if (!balloon3_has(BALLOON3_FEATURE_OHCI))
+		return;
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_uhc_pin_config));
+	pxa_set_ohci_info(&balloon3_ohci_info);
+}
+#else
+static inline void balloon3_uhc_init(void) {}
+#endif
+
+/******************************************************************************
+ * LEDs
+ ******************************************************************************/
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+static unsigned long balloon3_led_pin_config[] __initdata = {
+	GPIO9_GPIO,	/* NAND activity LED */
+	GPIO10_GPIO,	/* Heartbeat LED */
+};
+
+struct gpio_led balloon3_gpio_leds[] = {
+	{
+		.name			= "balloon3:green:idle",
+		.default_trigger	= "heartbeat",
+		.gpio			= BALLOON3_GPIO_LED_IDLE,
+		.active_low		= 1,
+	}, {
+		.name			= "balloon3:green:nand",
+		.default_trigger	= "nand-disk",
+		.gpio			= BALLOON3_GPIO_LED_NAND,
+		.active_low		= 1,
+	},
+};
+
+static struct gpio_led_platform_data balloon3_gpio_led_info = {
+	.leds		= balloon3_gpio_leds,
+	.num_leds	= ARRAY_SIZE(balloon3_gpio_leds),
+};
+
+static struct platform_device balloon3_leds = {