waterDataStatistics functionDefinition.h 袁明明 commit at 2021-04-02

waterDataStatistics/alarmDataCalculation/functionDefinition.h

@@ -947,3 +947,121 @@
 /* Bit masks for USB_COUNT0 */
 
 #define              EP0_RX_COUNT  0x7f       /* number of received bytes in EP0 FIFO */
+
+/* Bit masks for USB_NAKLIMIT0 */
+
+#define             EP0_NAK_LIMIT  0x1f       /* number of frames/micro frames after which EP0 timeouts */
+
+/* Bit masks for USB_TX_MAX_PACKET */
+
+#define         MAX_PACKET_SIZE_T  0x7ff      /* maximum data pay load in a frame */
+
+/* Bit masks for USB_RX_MAX_PACKET */
+
+#define         MAX_PACKET_SIZE_R  0x7ff      /* maximum data pay load in a frame */
+
+/* Bit masks for USB_TXCSR */
+
+#define                TXPKTRDY_T  0x1        /* data packet in FIFO indicator */
+#define          FIFO_NOT_EMPTY_T  0x2        /* FIFO not empty */
+#define                UNDERRUN_T  0x4        /* TxPktRdy not set  for an IN token */
+#define               FLUSHFIFO_T  0x8        /* flush endpoint FIFO */
+#define              STALL_SEND_T  0x10       /* issue a Stall handshake */
+#define              STALL_SENT_T  0x20       /* Stall handshake transmitted */
+#define        CLEAR_DATATOGGLE_T  0x40       /* clear endpoint data toggle */
+#define                INCOMPTX_T  0x80       /* indicates that a large packet is split */
+#define              DMAREQMODE_T  0x400      /* DMA mode (0 or 1) selection */
+#define        FORCE_DATATOGGLE_T  0x800      /* Force data toggle */
+#define              DMAREQ_ENA_T  0x1000     /* Enable DMA request for Tx EP */
+#define                     ISO_T  0x4000     /* enable Isochronous transfers */
+#define                 AUTOSET_T  0x8000     /* allows TxPktRdy to be set automatically */
+#define                  ERROR_TH  0x4        /* error condition host mode */
+#define         STALL_RECEIVED_TH  0x20       /* Stall handshake received host mode */
+#define            NAK_TIMEOUT_TH  0x80       /* NAK timeout host mode */
+
+/* Bit masks for USB_TXCOUNT */
+
+#define                  TX_COUNT  0x1fff     /* Number of bytes to be written to the selected endpoint Tx FIFO */
+
+/* Bit masks for USB_RXCSR */
+
+#define                RXPKTRDY_R  0x1        /* data packet in FIFO indicator */
+#define               FIFO_FULL_R  0x2        /* FIFO not empty */
+#define                 OVERRUN_R  0x4        /* TxPktRdy not set  for an IN token */
+#define               DATAERROR_R  0x8        /* Out packet cannot be loaded into Rx  FIFO */
+#define               FLUSHFIFO_R  0x10       /* flush endpoint FIFO */
+#define              STALL_SEND_R  0x20       /* issue a Stall handshake */
+#define              STALL_SENT_R  0x40       /* Stall handshake transmitted */
+#define        CLEAR_DATATOGGLE_R  0x80       /* clear endpoint data toggle */
+#define                INCOMPRX_R  0x100      /* indicates that a large packet is split */
+#define              DMAREQMODE_R  0x800      /* DMA mode (0 or 1) selection */
+#define                 DISNYET_R  0x1000     /* disable Nyet handshakes */
+#define              DMAREQ_ENA_R  0x2000     /* Enable DMA request for Tx EP */
+#define                     ISO_R  0x4000     /* enable Isochronous transfers */
+#define               AUTOCLEAR_R  0x8000     /* allows TxPktRdy to be set automatically */
+#define                  ERROR_RH  0x4        /* TxPktRdy not set  for an IN token host mode */
+#define                 REQPKT_RH  0x20       /* request an IN transaction host mode */
+#define         STALL_RECEIVED_RH  0x40       /* Stall handshake received host mode */
+#define               INCOMPRX_RH  0x100      /* indicates that a large packet is split host mode */
+#define             DMAREQMODE_RH  0x800      /* DMA mode (0 or 1) selection host mode */
+#define                AUTOREQ_RH  0x4000     /* sets ReqPkt automatically host mode */
+
+/* Bit masks for USB_RXCOUNT */
+
+#define                  RX_COUNT  0x1fff     /* Number of received bytes in the packet in the Rx FIFO */
+
+/* Bit masks for USB_TXTYPE */
+
+#define            TARGET_EP_NO_T  0xf        /* EP number */
+#define                PROTOCOL_T  0xc        /* transfer type */
+
+/* Bit masks for USB_TXINTERVAL */
+
+#define          TX_POLL_INTERVAL  0xff       /* polling interval for selected Tx EP */
+
+/* Bit masks for USB_RXTYPE */
+
+#define            TARGET_EP_NO_R  0xf        /* EP number */
+#define                PROTOCOL_R  0xc        /* transfer type */
+
+/* Bit masks for USB_RXINTERVAL */
+
+#define          RX_POLL_INTERVAL  0xff       /* polling interval for selected Rx EP */
+
+/* Bit masks for USB_DMA_INTERRUPT */
+
+#define                  DMA0_INT  0x1        /* DMA0 pending interrupt */
+#define                  DMA1_INT  0x2        /* DMA1 pending interrupt */
+#define                  DMA2_INT  0x4        /* DMA2 pending interrupt */
+#define                  DMA3_INT  0x8        /* DMA3 pending interrupt */
+#define                  DMA4_INT  0x10       /* DMA4 pending interrupt */
+#define                  DMA5_INT  0x20       /* DMA5 pending interrupt */
+#define                  DMA6_INT  0x40       /* DMA6 pending interrupt */
+#define                  DMA7_INT  0x80       /* DMA7 pending interrupt */
+
+/* Bit masks for USB_DMAxCONTROL */
+
+#define                   DMA_ENA  0x1        /* DMA enable */
+#define                 DIRECTION  0x2        /* direction of DMA transfer */
+#define                      MODE  0x4        /* DMA Bus error */
+#define                   INT_ENA  0x8        /* Interrupt enable */
+#define                     EPNUM  0xf0       /* EP number */
+#define                  BUSERROR  0x100      /* DMA Bus error */
+
+/* Bit masks for USB_DMAxADDRHIGH */
+
+#define             DMA_ADDR_HIGH  0xffff     /* Upper 16-bits of memory source/destination address for the DMA master channel */
+
+/* Bit masks for USB_DMAxADDRLOW */
+
+#define              DMA_ADDR_LOW  0xffff     /* Lower 16-bits of memory source/destination address for the DMA master channel */
+
+/* Bit masks for USB_DMAxCOUNTHIGH */
+
+#define            DMA_COUNT_HIGH  0xffff     /* Upper 16-bits of byte count of DMA transfer for DMA master channel */
+
+/* Bit masks for USB_DMAxCOUNTLOW */
+
+#define             DMA_COUNT_LOW  0xffff     /* Lower 16-bits of byte count of DMA transfer for DMA master channel */
+
+#endif /* _DEF_BF547_H */