|
|
@@ -136,3 +136,172 @@
|
|
|
#define MulticastFramesXmittedOK EMAC_TXC_MULTI /* Multicast TX Frame Count */
|
|
|
#define BroadcastFramesXmittedOK EMAC_TXC_BROAD /* Broadcast TX Frame Count */
|
|
|
#define FramesWithExcessiveDeferral EMAC_TXC_XS_DFR /* TX Frames With Excessive Deferral Count */
|
|
|
+#define MACControlFramesTransmitted EMAC_TXC_MACCTL /* MAC Control TX Frame Count */
|
|
|
+#define FramesTransmittedAll EMAC_TXC_ALLFRM /* Overall TX Frame Count */
|
|
|
+#define OctetsTransmittedAll EMAC_TXC_ALLOCT /* Overall TX Octet Count */
|
|
|
+#define FramesLenEq64Transmitted EMAC_TXC_EQ64 /* Good TX Frame Count - Byte Count x = 64 */
|
|
|
+#define FramesLen65_127Transmitted EMAC_TXC_LT128 /* Good TX Frame Count - Byte Count 64 < x < 128 */
|
|
|
+#define FramesLen128_255Transmitted EMAC_TXC_LT256 /* Good TX Frame Count - Byte Count 128 <= x < 256 */
|
|
|
+#define FramesLen256_511Transmitted EMAC_TXC_LT512 /* Good TX Frame Count - Byte Count 256 <= x < 512 */
|
|
|
+#define FramesLen512_1023Transmitted EMAC_TXC_LT1024 /* Good TX Frame Count - Byte Count 512 <= x < 1024 */
|
|
|
+#define FramesLen1024_MaxTransmitted EMAC_TXC_GE1024 /* Good TX Frame Count - Byte Count x >= 1024 */
|
|
|
+#define TxAbortedFrames EMAC_TXC_ABORT /* Total TX Frames Aborted Count */
|
|
|
+
|
|
|
+/***********************************************************************************
|
|
|
+** System MMR Register Bits And Macros
|
|
|
+**
|
|
|
+** Disclaimer: All macros are intended to make C and Assembly code more readable.
|
|
|
+** Use these macros carefully, as any that do left shifts for field
|
|
|
+** depositing will result in the lower order bits being destroyed. Any
|
|
|
+** macro that shifts left to properly position the bit-field should be
|
|
|
+** used as part of an OR to initialize a register and NOT as a dynamic
|
|
|
+** modifier UNLESS the lower order bits are saved and ORed back in when
|
|
|
+** the macro is used.
|
|
|
+*************************************************************************************/
|
|
|
+
|
|
|
+/************************ ETHERNET 10/100 CONTROLLER MASKS ************************/
|
|
|
+
|
|
|
+/* EMAC_OPMODE Masks */
|
|
|
+
|
|
|
+#define RE 0x00000001 /* Receiver Enable */
|
|
|
+#define ASTP 0x00000002 /* Enable Automatic Pad Stripping On RX Frames */
|
|
|
+#define HU 0x00000010 /* Hash Filter Unicast Address */
|
|
|
+#define HM 0x00000020 /* Hash Filter Multicast Address */
|
|
|
+#define PAM 0x00000040 /* Pass-All-Multicast Mode Enable */
|
|
|
+#define PR 0x00000080 /* Promiscuous Mode Enable */
|
|
|
+#define IFE 0x00000100 /* Inverse Filtering Enable */
|
|
|
+#define DBF 0x00000200 /* Disable Broadcast Frame Reception */
|
|
|
+#define PBF 0x00000400 /* Pass Bad Frames Enable */
|
|
|
+#define PSF 0x00000800 /* Pass Short Frames Enable */
|
|
|
+#define RAF 0x00001000 /* Receive-All Mode */
|
|
|
+#define TE 0x00010000 /* Transmitter Enable */
|
|
|
+#define DTXPAD 0x00020000 /* Disable Automatic TX Padding */
|
|
|
+#define DTXCRC 0x00040000 /* Disable Automatic TX CRC Generation */
|
|
|
+#define DC 0x00080000 /* Deferral Check */
|
|
|
+#define BOLMT 0x00300000 /* Back-Off Limit */
|
|
|
+#define BOLMT_10 0x00000000 /* 10-bit range */
|
|
|
+#define BOLMT_8 0x00100000 /* 8-bit range */
|
|
|
+#define BOLMT_4 0x00200000 /* 4-bit range */
|
|
|
+#define BOLMT_1 0x00300000 /* 1-bit range */
|
|
|
+#define DRTY 0x00400000 /* Disable TX Retry On Collision */
|
|
|
+#define LCTRE 0x00800000 /* Enable TX Retry On Late Collision */
|
|
|
+#define RMII 0x01000000 /* RMII/MII* Mode */
|
|
|
+#define RMII_10 0x02000000 /* Speed Select for RMII Port (10MBit/100MBit*) */
|
|
|
+#define FDMODE 0x04000000 /* Duplex Mode Enable (Full/Half*) */
|
|
|
+#define LB 0x08000000 /* Internal Loopback Enable */
|
|
|
+#define DRO 0x10000000 /* Disable Receive Own Frames (Half-Duplex Mode) */
|
|
|
+
|
|
|
+/* EMAC_STAADD Masks */
|
|
|
+
|
|
|
+#define STABUSY 0x00000001 /* Initiate Station Mgt Reg Access / STA Busy Stat */
|
|
|
+#define STAOP 0x00000002 /* Station Management Operation Code (Write/Read*) */
|
|
|
+#define STADISPRE 0x00000004 /* Disable Preamble Generation */
|
|
|
+#define STAIE 0x00000008 /* Station Mgt. Transfer Done Interrupt Enable */
|
|
|
+#define REGAD 0x000007C0 /* STA Register Address */
|
|
|
+#define PHYAD 0x0000F800 /* PHY Device Address */
|
|
|
+
|
|
|
+#define SET_REGAD(x) (((x)&0x1F)<< 6 ) /* Set STA Register Address */
|
|
|
+#define SET_PHYAD(x) (((x)&0x1F)<< 11 ) /* Set PHY Device Address */
|
|
|
+
|
|
|
+/* EMAC_STADAT Mask */
|
|
|
+
|
|
|
+#define STADATA 0x0000FFFF /* Station Management Data */
|
|
|
+
|
|
|
+/* EMAC_FLC Masks */
|
|
|
+
|
|
|
+#define FLCBUSY 0x00000001 /* Send Flow Ctrl Frame / Flow Ctrl Busy Status */
|
|
|
+#define FLCE 0x00000002 /* Flow Control Enable */
|
|
|
+#define PCF 0x00000004 /* Pass Control Frames */
|
|
|
+#define BKPRSEN 0x00000008 /* Enable Backpressure */
|
|
|
+#define FLCPAUSE 0xFFFF0000 /* Pause Time */
|
|
|
+
|
|
|
+#define SET_FLCPAUSE(x) (((x)&0xFFFF)<< 16) /* Set Pause Time */
|
|
|
+
|
|
|
+/* EMAC_WKUP_CTL Masks */
|
|
|
+
|
|
|
+#define CAPWKFRM 0x00000001 /* Capture Wake-Up Frames */
|
|
|
+#define MPKE 0x00000002 /* Magic Packet Enable */
|
|
|
+#define RWKE 0x00000004 /* Remote Wake-Up Frame Enable */
|
|
|
+#define GUWKE 0x00000008 /* Global Unicast Wake Enable */
|
|
|
+#define MPKS 0x00000020 /* Magic Packet Received Status */
|
|
|
+#define RWKS 0x00000F00 /* Wake-Up Frame Received Status, Filters 3:0 */
|
|
|
+
|
|
|
+/* EMAC_WKUP_FFCMD Masks */
|
|
|
+
|
|
|
+#define WF0_E 0x00000001 /* Enable Wake-Up Filter 0 */
|
|
|
+#define WF0_T 0x00000008 /* Wake-Up Filter 0 Addr Type (Multicast/Unicast*) */
|
|
|
+#define WF1_E 0x00000100 /* Enable Wake-Up Filter 1 */
|
|
|
+#define WF1_T 0x00000800 /* Wake-Up Filter 1 Addr Type (Multicast/Unicast*) */
|
|
|
+#define WF2_E 0x00010000 /* Enable Wake-Up Filter 2 */
|
|
|
+#define WF2_T 0x00080000 /* Wake-Up Filter 2 Addr Type (Multicast/Unicast*) */
|
|
|
+#define WF3_E 0x01000000 /* Enable Wake-Up Filter 3 */
|
|
|
+#define WF3_T 0x08000000 /* Wake-Up Filter 3 Addr Type (Multicast/Unicast*) */
|
|
|
+
|
|
|
+/* EMAC_WKUP_FFOFF Masks */
|
|
|
+
|
|
|
+#define WF0_OFF 0x000000FF /* Wake-Up Filter 0 Pattern Offset */
|
|
|
+#define WF1_OFF 0x0000FF00 /* Wake-Up Filter 1 Pattern Offset */
|
|
|
+#define WF2_OFF 0x00FF0000 /* Wake-Up Filter 2 Pattern Offset */
|
|
|
+#define WF3_OFF 0xFF000000 /* Wake-Up Filter 3 Pattern Offset */
|
|
|
+
|
|
|
+#define SET_WF0_OFF(x) (((x)&0xFF)<< 0 ) /* Set Wake-Up Filter 0 Byte Offset */
|
|
|
+#define SET_WF1_OFF(x) (((x)&0xFF)<< 8 ) /* Set Wake-Up Filter 1 Byte Offset */
|
|
|
+#define SET_WF2_OFF(x) (((x)&0xFF)<< 16 ) /* Set Wake-Up Filter 2 Byte Offset */
|
|
|
+#define SET_WF3_OFF(x) (((x)&0xFF)<< 24 ) /* Set Wake-Up Filter 3 Byte Offset */
|
|
|
+/* Set ALL Offsets */
|
|
|
+#define SET_WF_OFFS(x0,x1,x2,x3) (SET_WF0_OFF((x0))|SET_WF1_OFF((x1))|SET_WF2_OFF((x2))|SET_WF3_OFF((x3)))
|
|
|
+
|
|
|
+/* EMAC_WKUP_FFCRC0 Masks */
|
|
|
+
|
|
|
+#define WF0_CRC 0x0000FFFF /* Wake-Up Filter 0 Pattern CRC */
|
|
|
+#define WF1_CRC 0xFFFF0000 /* Wake-Up Filter 1 Pattern CRC */
|
|
|
+
|
|
|
+#define SET_WF0_CRC(x) (((x)&0xFFFF)<< 0 ) /* Set Wake-Up Filter 0 Target CRC */
|
|
|
+#define SET_WF1_CRC(x) (((x)&0xFFFF)<< 16 ) /* Set Wake-Up Filter 1 Target CRC */
|
|
|
+
|
|
|
+/* EMAC_WKUP_FFCRC1 Masks */
|
|
|
+
|
|
|
+#define WF2_CRC 0x0000FFFF /* Wake-Up Filter 2 Pattern CRC */
|
|
|
+#define WF3_CRC 0xFFFF0000 /* Wake-Up Filter 3 Pattern CRC */
|
|
|
+
|
|
|
+#define SET_WF2_CRC(x) (((x)&0xFFFF)<< 0 ) /* Set Wake-Up Filter 2 Target CRC */
|
|
|
+#define SET_WF3_CRC(x) (((x)&0xFFFF)<< 16 ) /* Set Wake-Up Filter 3 Target CRC */
|
|
|
+
|
|
|
+/* EMAC_SYSCTL Masks */
|
|
|
+
|
|
|
+#define PHYIE 0x00000001 /* PHY_INT Interrupt Enable */
|
|
|
+#define RXDWA 0x00000002 /* Receive Frame DMA Word Alignment (Odd/Even*) */
|
|
|
+#define RXCKS 0x00000004 /* Enable RX Frame TCP/UDP Checksum Computation */
|
|
|
+#define TXDWA 0x00000010 /* Transmit Frame DMA Word Alignment (Odd/Even*) */
|
|
|
+#define MDCDIV 0x00003F00 /* SCLK:MDC Clock Divisor [MDC=SCLK/(2*(N+1))] */
|
|
|
+
|
|
|
+#define SET_MDCDIV(x) (((x)&0x3F)<< 8) /* Set MDC Clock Divisor */
|
|
|
+
|
|
|
+/* EMAC_SYSTAT Masks */
|
|
|
+
|
|
|
+#define PHYINT 0x00000001 /* PHY_INT Interrupt Status */
|
|
|
+#define MMCINT 0x00000002 /* MMC Counter Interrupt Status */
|
|
|
+#define RXFSINT 0x00000004 /* RX Frame-Status Interrupt Status */
|
|
|
+#define TXFSINT 0x00000008 /* TX Frame-Status Interrupt Status */
|
|
|
+#define WAKEDET 0x00000010 /* Wake-Up Detected Status */
|
|
|
+#define RXDMAERR 0x00000020 /* RX DMA Direction Error Status */
|
|
|
+#define TXDMAERR 0x00000040 /* TX DMA Direction Error Status */
|
|
|
+#define STMDONE 0x00000080 /* Station Mgt. Transfer Done Interrupt Status */
|
|
|
+
|
|
|
+/* EMAC_RX_STAT, EMAC_RX_STKY, and EMAC_RX_IRQE Masks */
|
|
|
+
|
|
|
+#define RX_FRLEN 0x000007FF /* Frame Length In Bytes */
|
|
|
+#define RX_COMP 0x00001000 /* RX Frame Complete */
|
|
|
+#define RX_OK 0x00002000 /* RX Frame Received With No Errors */
|
|
|
+#define RX_LONG 0x00004000 /* RX Frame Too Long Error */
|
|
|
+#define RX_ALIGN 0x00008000 /* RX Frame Alignment Error */
|
|
|
+#define RX_CRC 0x00010000 /* RX Frame CRC Error */
|
|
|
+#define RX_LEN 0x00020000 /* RX Frame Length Error */
|
|
|
+#define RX_FRAG 0x00040000 /* RX Frame Fragment Error */
|
|
|
+#define RX_ADDR 0x00080000 /* RX Frame Address Filter Failed Error */
|
|
|
+#define RX_DMAO 0x00100000 /* RX Frame DMA Overrun Error */
|
|
|
+#define RX_PHY 0x00200000 /* RX Frame PHY Error */
|
|
|
+#define RX_LATE 0x00400000 /* RX Frame Late Collision Error */
|
|
|
+#define RX_RANGE 0x00800000 /* RX Frame Length Field Out of Range Error */
|
|
|
+#define RX_MULTI 0x01000000 /* RX Multicast Frame Indicator */
|
|
|
+#define RX_BROAD 0x02000000 /* RX Broadcast Frame Indicator */
|
邵敏