浏览代码

waterDataPreprocessing normalDataOperation.c 徐寅秋 commit at 2021-02-22

徐寅秋 4 年之前
父节点
当前提交
e1c0686ccb
共有 1 个文件被更改,包括 153 次插入0 次删除
  1. 153 0
      waterDataPreprocessing/databaseOperation/normalDataOperation.c

+ 153 - 0
waterDataPreprocessing/databaseOperation/normalDataOperation.c

@@ -412,3 +412,156 @@ static int __init omap_mcspi_init(struct omap_hwmod *oh, void *unused)
 		pr_err("Memory allocation for McSPI device failed\n");
 		return -ENOMEM;
 	}
+
+	pdata->num_cs = mcspi_attrib->num_chipselect;
+	switch (oh->class->rev) {
+	case OMAP2_MCSPI_REV:
+	case OMAP3_MCSPI_REV:
+			pdata->regs_offset = 0;
+			break;
+	case OMAP4_MCSPI_REV:
+			pdata->regs_offset = OMAP4_MCSPI_REG_OFFSET;
+			break;
+	default:
+			pr_err("Invalid McSPI Revision value\n");
+			kfree(pdata);
+			return -EINVAL;
+	}
+
+	spi_num++;
+	pdev = omap_device_build(name, spi_num, oh, pdata,
+				sizeof(*pdata),	NULL, 0, 0);
+	WARN(IS_ERR(pdev), "Can't build omap_device for %s:%s\n",
+				name, oh->name);
+	kfree(pdata);
+	return 0;
+}
+
+static void omap_init_mcspi(void)
+{
+	omap_hwmod_for_each_by_class("mcspi", omap_mcspi_init, NULL);
+}
+
+#else
+static inline void omap_init_mcspi(void) {}
+#endif
+
+/**
+ * omap_init_rng - bind the RNG hwmod to the RNG omap_device
+ *
+ * Bind the RNG hwmod to the RNG omap_device.  No return value.
+ */
+static void omap_init_rng(void)
+{
+	struct omap_hwmod *oh;
+	struct platform_device *pdev;
+
+	oh = omap_hwmod_lookup("rng");
+	if (!oh)
+		return;
+
+	pdev = omap_device_build("omap_rng", -1, oh, NULL, 0, NULL, 0, 0);
+	WARN(IS_ERR(pdev), "Can't build omap_device for omap_rng\n");
+}
+
+#if defined(CONFIG_CRYPTO_DEV_OMAP_SHAM) || defined(CONFIG_CRYPTO_DEV_OMAP_SHAM_MODULE)
+
+#ifdef CONFIG_ARCH_OMAP2
+static struct resource omap2_sham_resources[] = {
+	{
+		.start	= OMAP24XX_SEC_SHA1MD5_BASE,
+		.end	= OMAP24XX_SEC_SHA1MD5_BASE + 0x64,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= 51 + OMAP_INTC_START,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+static int omap2_sham_resources_sz = ARRAY_SIZE(omap2_sham_resources);
+#else
+#define omap2_sham_resources		NULL
+#define omap2_sham_resources_sz		0
+#endif
+
+#ifdef CONFIG_ARCH_OMAP3
+static struct resource omap3_sham_resources[] = {
+	{
+		.start	= OMAP34XX_SEC_SHA1MD5_BASE,
+		.end	= OMAP34XX_SEC_SHA1MD5_BASE + 0x64,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= 49 + OMAP_INTC_START,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= OMAP34XX_DMA_SHA1MD5_RX,
+		.flags	= IORESOURCE_DMA,
+	}
+};
+static int omap3_sham_resources_sz = ARRAY_SIZE(omap3_sham_resources);
+#else
+#define omap3_sham_resources		NULL
+#define omap3_sham_resources_sz		0
+#endif
+
+static struct platform_device sham_device = {
+	.name		= "omap-sham",
+	.id		= -1,
+};
+
+static void omap_init_sham(void)
+{
+	if (cpu_is_omap24xx()) {
+		sham_device.resource = omap2_sham_resources;
+		sham_device.num_resources = omap2_sham_resources_sz;
+	} else if (cpu_is_omap34xx()) {
+		sham_device.resource = omap3_sham_resources;
+		sham_device.num_resources = omap3_sham_resources_sz;
+	} else {
+		pr_err("%s: platform not supported\n", __func__);
+		return;
+	}
+	platform_device_register(&sham_device);
+}
+#else
+static inline void omap_init_sham(void) { }
+#endif
+
+#if defined(CONFIG_CRYPTO_DEV_OMAP_AES) || defined(CONFIG_CRYPTO_DEV_OMAP_AES_MODULE)
+
+#ifdef CONFIG_ARCH_OMAP2
+static struct resource omap2_aes_resources[] = {
+	{
+		.start	= OMAP24XX_SEC_AES_BASE,
+		.end	= OMAP24XX_SEC_AES_BASE + 0x4C,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= OMAP24XX_DMA_AES_TX,
+		.flags	= IORESOURCE_DMA,
+	},
+	{
+		.start	= OMAP24XX_DMA_AES_RX,
+		.flags	= IORESOURCE_DMA,
+	}
+};
+static int omap2_aes_resources_sz = ARRAY_SIZE(omap2_aes_resources);
+#else
+#define omap2_aes_resources		NULL
+#define omap2_aes_resources_sz		0
+#endif
+
+#ifdef CONFIG_ARCH_OMAP3
+static struct resource omap3_aes_resources[] = {
+	{
+		.start	= OMAP34XX_SEC_AES_BASE,
+		.end	= OMAP34XX_SEC_AES_BASE + 0x4C,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= OMAP34XX_DMA_AES2_TX,
+		.flags	= IORESOURCE_DMA,
+	},
+	{