efDataStatistics connectTheSignalSlot.c 韩正义 commit at 2020-09-09

efDataStatistics/monitoringDataProcessing/connectTheSignalSlot.c

@@ -0,0 +1,167 @@
+/*
+ * arch/arm/mach-orion5x/kurobox_pro-setup.c
+ *
+ * Maintainer: Ronen Shitrit <rshitrit@marvell.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/delay.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/nand.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/i2c.h>
+#include <linux/serial_reg.h>
+#include <linux/ata_platform.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include <mach/orion5x.h>
+#include <linux/platform_data/mtd-orion_nand.h>
+#include "common.h"
+#include "mpp.h"
+
+/*****************************************************************************
+ * KUROBOX-PRO Info
+ ****************************************************************************/
+
+/*
+ * 256K NOR flash Device bus boot chip select
+ */
+
+#define KUROBOX_PRO_NOR_BOOT_BASE	0xf4000000
+#define KUROBOX_PRO_NOR_BOOT_SIZE	SZ_256K
+
+/*
+ * 256M NAND flash on Device bus chip select 1
+ */
+
+#define KUROBOX_PRO_NAND_BASE		0xfc000000
+#define KUROBOX_PRO_NAND_SIZE		SZ_2M
+
+/*****************************************************************************
+ * 256MB NAND Flash on Device bus CS0
+ ****************************************************************************/
+
+static struct mtd_partition kurobox_pro_nand_parts[] = {
+	{
+		.name	= "uImage",
+		.offset	= 0,
+		.size	= SZ_4M,
+	}, {
+		.name	= "rootfs",
+		.offset	= SZ_4M,
+		.size	= SZ_64M,
+	}, {
+		.name	= "extra",
+		.offset	= SZ_4M + SZ_64M,
+		.size	= SZ_256M - (SZ_4M + SZ_64M),
+	},
+};
+
+static struct resource kurobox_pro_nand_resource = {
+	.flags		= IORESOURCE_MEM,
+	.start		= KUROBOX_PRO_NAND_BASE,
+	.end		= KUROBOX_PRO_NAND_BASE + KUROBOX_PRO_NAND_SIZE - 1,
+};
+
+static struct orion_nand_data kurobox_pro_nand_data = {
+	.parts		= kurobox_pro_nand_parts,
+	.nr_parts	= ARRAY_SIZE(kurobox_pro_nand_parts),
+	.cle		= 0,
+	.ale		= 1,
+	.width		= 8,
+};
+
+static struct platform_device kurobox_pro_nand_flash = {
+	.name		= "orion_nand",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &kurobox_pro_nand_data,
+	},
+	.resource	= &kurobox_pro_nand_resource,
+	.num_resources	= 1,
+};
+
+/*****************************************************************************
+ * 256KB NOR Flash on BOOT Device
+ ****************************************************************************/
+
+static struct physmap_flash_data kurobox_pro_nor_flash_data = {
+	.width		= 1,
+};
+
+static struct resource kurobox_pro_nor_flash_resource = {
+	.flags			= IORESOURCE_MEM,
+	.start			= KUROBOX_PRO_NOR_BOOT_BASE,
+	.end			= KUROBOX_PRO_NOR_BOOT_BASE + KUROBOX_PRO_NOR_BOOT_SIZE - 1,
+};
+
+static struct platform_device kurobox_pro_nor_flash = {
+	.name			= "physmap-flash",
+	.id			= 0,
+	.dev		= {
+		.platform_data	= &kurobox_pro_nor_flash_data,
+	},
+	.num_resources		= 1,
+	.resource		= &kurobox_pro_nor_flash_resource,
+};
+
+/*****************************************************************************
+ * PCI
+ ****************************************************************************/
+
+static int __init kurobox_pro_pci_map_irq(const struct pci_dev *dev, u8 slot,
+	u8 pin)
+{
+	int irq;
+
+	/*
+	 * Check for devices with hard-wired IRQs.
+	 */
+	irq = orion5x_pci_map_irq(dev, slot, pin);
+	if (irq != -1)
+		return irq;
+
+	/*
+	 * PCI isn't used on the Kuro
+	 */
+	return -1;
+}
+
+static struct hw_pci kurobox_pro_pci __initdata = {
+	.nr_controllers	= 2,
+	.setup		= orion5x_pci_sys_setup,
+	.scan		= orion5x_pci_sys_scan_bus,
+	.map_irq	= kurobox_pro_pci_map_irq,
+};
+
+static int __init kurobox_pro_pci_init(void)
+{
+	if (machine_is_kurobox_pro()) {
+		orion5x_pci_disable();
+		pci_common_init(&kurobox_pro_pci);
+	}
+
+	return 0;
+}
+
+subsys_initcall(kurobox_pro_pci_init);
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+
+static struct mv643xx_eth_platform_data kurobox_pro_eth_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
+};
+
+/*****************************************************************************
+ * RTC 5C372a on I2C bus