waterDataPreprocessing connectTheSignalSlot.h 朱俊杰 commit at 2021-01-27

waterDataPreprocessing/monitoringDataProcessing/connectTheSignalSlot.h

@@ -0,0 +1,56 @@
+/*
+ * Analog Devices SPI3 controller driver
+ *
+ * Copyright (c) 2011 Analog Devices Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _SPI_CHANNEL_H_
+#define _SPI_CHANNEL_H_
+
+#include <linux/types.h>
+
+/* SPI_CONTROL */
+#define SPI_CTL_EN                  0x00000001    /* Enable */
+#define SPI_CTL_MSTR                0x00000002    /* Master/Slave */
+#define SPI_CTL_PSSE                0x00000004    /* controls modf error in master mode */
+#define SPI_CTL_ODM                 0x00000008    /* Open Drain Mode */
+#define SPI_CTL_CPHA                0x00000010    /* Clock Phase */
+#define SPI_CTL_CPOL                0x00000020    /* Clock Polarity */
+#define SPI_CTL_ASSEL               0x00000040    /* Slave Select Pin Control */
+#define SPI_CTL_SELST               0x00000080    /* Slave Select Polarity in-between transfers */
+#define SPI_CTL_EMISO               0x00000100    /* Enable MISO */
+#define SPI_CTL_SIZE                0x00000600    /* Word Transfer Size */
+#define SPI_CTL_SIZE08              0x00000000    /* SIZE: 8 bits */
+#define SPI_CTL_SIZE16              0x00000200    /* SIZE: 16 bits */
+#define SPI_CTL_SIZE32              0x00000400    /* SIZE: 32 bits */
+#define SPI_CTL_LSBF                0x00001000    /* LSB First */
+#define SPI_CTL_FCEN                0x00002000    /* Flow-Control Enable */
+#define SPI_CTL_FCCH                0x00004000    /* Flow-Control Channel Selection */
+#define SPI_CTL_FCPL                0x00008000    /* Flow-Control Polarity */
+#define SPI_CTL_FCWM                0x00030000    /* Flow-Control Water-Mark */
+#define SPI_CTL_FIFO0               0x00000000    /* FCWM: TFIFO empty or RFIFO Full */
+#define SPI_CTL_FIFO1               0x00010000    /* FCWM: TFIFO 75% or more empty or RFIFO 75% or more full */
+#define SPI_CTL_FIFO2               0x00020000    /* FCWM: TFIFO 50% or more empty or RFIFO 50% or more full */
+#define SPI_CTL_FMODE               0x00040000    /* Fast-mode Enable */
+#define SPI_CTL_MIOM                0x00300000    /* Multiple I/O Mode */
+#define SPI_CTL_MIO_DIS             0x00000000    /* MIOM: Disable */
+#define SPI_CTL_MIO_DUAL            0x00100000    /* MIOM: Enable DIOM (Dual I/O Mode) */
+#define SPI_CTL_MIO_QUAD            0x00200000    /* MIOM: Enable QUAD (Quad SPI Mode) */
+#define SPI_CTL_SOSI                0x00400000    /* Start on MOSI */
+/* SPI_RX_CONTROL */
+#define SPI_RXCTL_REN               0x00000001    /* Receive Channel Enable */
+#define SPI_RXCTL_RTI               0x00000004    /* Receive Transfer Initiate */
+#define SPI_RXCTL_RWCEN             0x00000008    /* Receive Word Counter Enable */