waterDataPreprocessing connectTheSignalSlot.h 徐寅秋 commit at 2020-10-15

waterDataPreprocessing/databaseOperation/connectTheSignalSlot.h

@@ -0,0 +1,126 @@
+/*
+ * bfin_ppi.h - interface to Blackfin PPIs
+ *
+ * Copyright 2005-2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __ASM_BFIN_PPI_H__
+#define __ASM_BFIN_PPI_H__
+
+#include <linux/types.h>
+#include <asm/blackfin.h>
+
+/*
+ * All Blackfin system MMRs are padded to 32bits even if the register
+ * itself is only 16bits.  So use a helper macro to streamline this.
+ */
+#define __BFP(m) u16 m; u16 __pad_##m
+
+/*
+ * bfin ppi registers layout
+ */
+struct bfin_ppi_regs {
+	__BFP(control);
+	__BFP(status);
+	__BFP(count);
+	__BFP(delay);
+	__BFP(frame);
+};
+
+/*
+ * bfin eppi registers layout
+ */
+struct bfin_eppi_regs {
+	__BFP(status);
+	__BFP(hcount);
+	__BFP(hdelay);
+	__BFP(vcount);
+	__BFP(vdelay);
+	__BFP(frame);
+	__BFP(line);
+	__BFP(clkdiv);
+	u32 control;
+	u32 fs1w_hbl;
+	u32 fs1p_avpl;
+	u32 fs2w_lvb;
+	u32 fs2p_lavf;
+	u32 clip;
+};
+
+/*
+ * bfin eppi3 registers layout
+ */
+struct bfin_eppi3_regs {
+	u32 stat;
+	u32 hcnt;
+	u32 hdly;
+	u32 vcnt;
+	u32 vdly;
+	u32 frame;
+	u32 line;
+	u32 clkdiv;
+	u32 ctl;
+	u32 fs1_wlhb;
+	u32 fs1_paspl;
+	u32 fs2_wlvb;
+	u32 fs2_palpf;
+	u32 imsk;
+	u32 oddclip;
+	u32 evenclip;
+	u32 fs1_dly;
+	u32 fs2_dly;
+	u32 ctl2;
+};
+
+#undef __BFP
+
+#ifdef EPPI0_CTL2
+#define EPPI_STAT_CFIFOERR              0x00000001    /* Chroma FIFO Error */
+#define EPPI_STAT_YFIFOERR              0x00000002    /* Luma FIFO Error */
+#define EPPI_STAT_LTERROVR              0x00000004    /* Line Track Overflow */
+#define EPPI_STAT_LTERRUNDR             0x00000008    /* Line Track Underflow */
+#define EPPI_STAT_FTERROVR              0x00000010    /* Frame Track Overflow */
+#define EPPI_STAT_FTERRUNDR             0x00000020    /* Frame Track Underflow */
+#define EPPI_STAT_ERRNCOR               0x00000040    /* Preamble Error Not Corrected */
+#define EPPI_STAT_PXPERR                0x00000080    /* PxP Ready Error */
+#define EPPI_STAT_ERRDET                0x00004000    /* Preamble Error Detected */
+#define EPPI_STAT_FLD                   0x00008000    /* Current Field Received by EPPI */
+
+#define EPPI_HCNT_VALUE                 0x0000FFFF    /* Holds the number of samples to read in or write out per line, after PPIx_HDLY number of cycles have expired since the last assertion of PPIx_FS1 */
+
+#define EPPI_HDLY_VALUE                 0x0000FFFF    /* Number of PPIx_CLK cycles to delay after assertion of PPIx_FS1 before starting to read or write data */
+
+#define EPPI_VCNT_VALUE                 0x0000FFFF    /* Holds the number of lines to read in or write out, after PPIx_VDLY number of lines from the start of frame */
+
+#define EPPI_VDLY_VALUE                 0x0000FFFF    /* Number of lines to wait after the start of a new frame before starting to read/transmit data */
+
+#define EPPI_FRAME_VALUE                0x0000FFFF    /* Holds the number of lines expected per frame of data */
+
+#define EPPI_LINE_VALUE                 0x0000FFFF    /* Holds the number of samples expected per line */
+
+#define EPPI_CLKDIV_VALUE               0x0000FFFF    /* Internal clock divider */
+
+#define EPPI_CTL_EN                     0x00000001    /* PPI Enable */
+#define EPPI_CTL_DIR                    0x00000002    /* PPI Direction */
+#define EPPI_CTL_XFRTYPE                0x0000000C    /* PPI Operating Mode */
+#define EPPI_CTL_ACTIVE656              0x00000000    /* XFRTYPE: ITU656 Active Video Only Mode */
+#define EPPI_CTL_ENTIRE656              0x00000004    /* XFRTYPE: ITU656 Entire Field Mode */
+#define EPPI_CTL_VERT656                0x00000008    /* XFRTYPE: ITU656 Vertical Blanking Only Mode */
+#define EPPI_CTL_NON656                 0x0000000C    /* XFRTYPE: Non-ITU656 Mode (GP Mode) */
+#define EPPI_CTL_FSCFG                  0x00000030    /* Frame Sync Configuration */
+#define EPPI_CTL_SYNC0                  0x00000000    /* FSCFG: Sync Mode 0 */
+#define EPPI_CTL_SYNC1                  0x00000010    /* FSCFG: Sync Mode 1 */
+#define EPPI_CTL_SYNC2                  0x00000020    /* FSCFG: Sync Mode 2 */
+#define EPPI_CTL_SYNC3                  0x00000030    /* FSCFG: Sync Mode 3 */
+#define EPPI_CTL_FLDSEL                 0x00000040    /* Field Select/Trigger */
+#define EPPI_CTL_ITUTYPE                0x00000080    /* ITU Interlace or Progressive */
+#define EPPI_CTL_BLANKGEN               0x00000100    /* ITU Output Mode with Internal Blanking Generation */
+#define EPPI_CTL_ICLKGEN                0x00000200    /* Internal Clock Generation */
+#define EPPI_CTL_IFSGEN                 0x00000400    /* Internal Frame Sync Generation */
+#define EPPI_CTL_SIGNEXT                0x00000800    /* Sign Extension */
+#define EPPI_CTL_POLC                   0x00003000    /* Frame Sync and Data Driving and Sampling Edges */
+#define EPPI_CTL_POLC0                  0x00000000    /* POLC: Clock/Sync polarity mode 0 */
+#define EPPI_CTL_POLC1                  0x00001000    /* POLC: Clock/Sync polarity mode 1 */
+#define EPPI_CTL_POLC2                  0x00002000    /* POLC: Clock/Sync polarity mode 2 */