waterDataStatisticsCrossAssociation connectionSignalSlot.h 朱俊杰 commit at 2021-02-07

waterDataStatisticsCrossAssociation/monitoringDataProcessing/connectionSignalSlot.h

@@ -948,3 +948,154 @@
 #define B3WAT_1			0x10000000  /* B3 Write Access Time = 1 cycle					*/
 #define B3WAT_2			0x20000000  /* B3 Write Access Time = 2 cycles					*/
 #define B3WAT_3			0x30000000  /* B3 Write Access Time = 3 cycles					*/
+#define B3WAT_4			0x40000000  /* B3 Write Access Time = 4 cycles					*/
+#define B3WAT_5			0x50000000  /* B3 Write Access Time = 5 cycles					*/
+#define B3WAT_6			0x60000000  /* B3 Write Access Time = 6 cycles					*/
+#define B3WAT_7			0x70000000  /* B3 Write Access Time = 7 cycles					*/
+#define B3WAT_8			0x80000000  /* B3 Write Access Time = 8 cycles					*/
+#define B3WAT_9			0x90000000  /* B3 Write Access Time = 9 cycles					*/
+#define B3WAT_10		0xA0000000  /* B3 Write Access Time = 10 cycles					*/
+#define B3WAT_11		0xB0000000  /* B3 Write Access Time = 11 cycles					*/
+#define B3WAT_12		0xC0000000  /* B3 Write Access Time = 12 cycles					*/
+#define B3WAT_13		0xD0000000  /* B3 Write Access Time = 13 cycles					*/
+#define B3WAT_14		0xE0000000  /* B3 Write Access Time = 14 cycles					*/
+#define B3WAT_15		0xF0000000  /* B3 Write Access Time = 15 cycles					*/
+
+
+/* **********************  SDRAM CONTROLLER MASKS  **********************************************/
+/* EBIU_SDGCTL Masks																			*/
+#define SCTLE			0x00000001	/* Enable SDRAM Signals										*/
+#define CL_2			0x00000008	/* SDRAM CAS Latency = 2 cycles								*/
+#define CL_3			0x0000000C	/* SDRAM CAS Latency = 3 cycles								*/
+#define PASR_ALL		0x00000000	/* All 4 SDRAM Banks Refreshed In Self-Refresh				*/
+#define PASR_B0_B1		0x00000010	/* SDRAM Banks 0 and 1 Are Refreshed In Self-Refresh		*/
+#define PASR_B0			0x00000020	/* Only SDRAM Bank 0 Is Refreshed In Self-Refresh			*/
+#define TRAS_1			0x00000040	/* SDRAM tRAS = 1 cycle										*/
+#define TRAS_2			0x00000080	/* SDRAM tRAS = 2 cycles									*/
+#define TRAS_3			0x000000C0	/* SDRAM tRAS = 3 cycles									*/
+#define TRAS_4			0x00000100	/* SDRAM tRAS = 4 cycles									*/
+#define TRAS_5			0x00000140	/* SDRAM tRAS = 5 cycles									*/
+#define TRAS_6			0x00000180	/* SDRAM tRAS = 6 cycles									*/
+#define TRAS_7			0x000001C0	/* SDRAM tRAS = 7 cycles									*/
+#define TRAS_8			0x00000200	/* SDRAM tRAS = 8 cycles									*/
+#define TRAS_9			0x00000240	/* SDRAM tRAS = 9 cycles									*/
+#define TRAS_10			0x00000280	/* SDRAM tRAS = 10 cycles									*/
+#define TRAS_11			0x000002C0	/* SDRAM tRAS = 11 cycles									*/
+#define TRAS_12			0x00000300	/* SDRAM tRAS = 12 cycles									*/
+#define TRAS_13			0x00000340	/* SDRAM tRAS = 13 cycles									*/
+#define TRAS_14			0x00000380	/* SDRAM tRAS = 14 cycles									*/
+#define TRAS_15			0x000003C0	/* SDRAM tRAS = 15 cycles									*/
+#define TRP_1			0x00000800	/* SDRAM tRP = 1 cycle										*/
+#define TRP_2			0x00001000	/* SDRAM tRP = 2 cycles										*/
+#define TRP_3			0x00001800	/* SDRAM tRP = 3 cycles										*/
+#define TRP_4			0x00002000	/* SDRAM tRP = 4 cycles										*/
+#define TRP_5			0x00002800	/* SDRAM tRP = 5 cycles										*/
+#define TRP_6			0x00003000	/* SDRAM tRP = 6 cycles										*/
+#define TRP_7			0x00003800	/* SDRAM tRP = 7 cycles										*/
+#define TRCD_1			0x00008000	/* SDRAM tRCD = 1 cycle										*/
+#define TRCD_2			0x00010000	/* SDRAM tRCD = 2 cycles									*/
+#define TRCD_3			0x00018000	/* SDRAM tRCD = 3 cycles									*/
+#define TRCD_4			0x00020000	/* SDRAM tRCD = 4 cycles									*/
+#define TRCD_5			0x00028000	/* SDRAM tRCD = 5 cycles									*/
+#define TRCD_6			0x00030000	/* SDRAM tRCD = 6 cycles									*/
+#define TRCD_7			0x00038000	/* SDRAM tRCD = 7 cycles									*/
+#define TWR_1			0x00080000	/* SDRAM tWR = 1 cycle										*/
+#define TWR_2			0x00100000	/* SDRAM tWR = 2 cycles										*/
+#define TWR_3			0x00180000	/* SDRAM tWR = 3 cycles										*/
+#define PUPSD			0x00200000	/* Power-Up Start Delay (15 SCLK Cycles Delay)				*/
+#define PSM				0x00400000	/* Power-Up Sequence (Mode Register Before/After* Refresh)	*/
+#define PSS				0x00800000	/* Enable Power-Up Sequence on Next SDRAM Access			*/
+#define SRFS			0x01000000	/* Enable SDRAM Self-Refresh Mode							*/
+#define EBUFE			0x02000000	/* Enable External Buffering Timing							*/
+#define FBBRW			0x04000000	/* Enable Fast Back-To-Back Read To Write					*/
+#define EMREN			0x10000000	/* Extended Mode Register Enable							*/
+#define TCSR			0x20000000	/* Temp-Compensated Self-Refresh Value (85/45* Deg C)		*/
+#define CDDBG			0x40000000	/* Tristate SDRAM Controls During Bus Grant					*/
+
+/* EBIU_SDBCTL Masks																		*/
+#define EBE				0x0001		/* Enable SDRAM External Bank							*/
+#define EBSZ_16			0x0000		/* SDRAM External Bank Size = 16MB	*/
+#define EBSZ_32			0x0002		/* SDRAM External Bank Size = 32MB	*/
+#define EBSZ_64			0x0004		/* SDRAM External Bank Size = 64MB	*/
+#define EBSZ_128		0x0006		/* SDRAM External Bank Size = 128MB		*/
+#define EBSZ_256		0x0008		/* SDRAM External Bank Size = 256MB 	*/
+#define EBSZ_512		0x000A		/* SDRAM External Bank Size = 512MB		*/
+#define EBCAW_8			0x0000		/* SDRAM External Bank Column Address Width = 8 Bits	*/
+#define EBCAW_9			0x0010		/* SDRAM External Bank Column Address Width = 9 Bits	*/
+#define EBCAW_10		0x0020		/* SDRAM External Bank Column Address Width = 10 Bits	*/
+#define EBCAW_11		0x0030		/* SDRAM External Bank Column Address Width = 11 Bits	*/
+
+/* EBIU_SDSTAT Masks														*/
+#define SDCI			0x0001		/* SDRAM Controller Idle 				*/
+#define SDSRA			0x0002		/* SDRAM Self-Refresh Active			*/
+#define SDPUA			0x0004		/* SDRAM Power-Up Active 				*/
+#define SDRS			0x0008		/* SDRAM Will Power-Up On Next Access	*/
+#define SDEASE			0x0010		/* SDRAM EAB Sticky Error Status		*/
+#define BGSTAT			0x0020		/* Bus Grant Status						*/
+
+
+/* **************************  DMA CONTROLLER MASKS  ********************************/
+
+/* DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP Masks								*/
+#define CTYPE			0x0040	/* DMA Channel Type Indicator (Memory/Peripheral*)	*/
+#define PMAP			0xF000	/* Peripheral Mapped To This Channel				*/
+#define PMAP_PPI		0x0000	/* 		PPI Port DMA								*/
+#define	PMAP_EMACRX		0x1000	/* 		Ethernet Receive DMA						*/
+#define PMAP_EMACTX		0x2000	/* 		Ethernet Transmit DMA						*/
+#define PMAP_SPORT0RX	0x3000	/* 		SPORT0 Receive DMA							*/
+#define PMAP_SPORT0TX	0x4000	/* 		SPORT0 Transmit DMA							*/
+#define PMAP_SPORT1RX	0x5000	/* 		SPORT1 Receive DMA							*/
+#define PMAP_SPORT1TX	0x6000	/* 		SPORT1 Transmit DMA							*/
+#define PMAP_SPI		0x7000	/* 		SPI Port DMA								*/
+#define PMAP_UART0RX	0x8000	/* 		UART0 Port Receive DMA						*/
+#define PMAP_UART0TX	0x9000	/* 		UART0 Port Transmit DMA						*/
+#define	PMAP_UART1RX	0xA000	/* 		UART1 Port Receive DMA						*/
+#define	PMAP_UART1TX	0xB000	/* 		UART1 Port Transmit DMA						*/
+
+/*  ************  PARALLEL PERIPHERAL INTERFACE (PPI) MASKS *************/
+/*  PPI_CONTROL Masks													*/
+#define PORT_EN			0x0001		/* PPI Port Enable					*/
+#define PORT_DIR		0x0002		/* PPI Port Direction				*/
+#define XFR_TYPE		0x000C		/* PPI Transfer Type				*/
+#define PORT_CFG		0x0030		/* PPI Port Configuration			*/
+#define FLD_SEL			0x0040		/* PPI Active Field Select			*/
+#define PACK_EN			0x0080		/* PPI Packing Mode					*/
+#define DMA32			0x0100		/* PPI 32-bit DMA Enable			*/
+#define SKIP_EN			0x0200		/* PPI Skip Element Enable			*/
+#define SKIP_EO			0x0400		/* PPI Skip Even/Odd Elements		*/
+#define DLEN_8			0x0000		/* Data Length = 8 Bits				*/
+#define DLEN_10			0x0800		/* Data Length = 10 Bits			*/
+#define DLEN_11			0x1000		/* Data Length = 11 Bits			*/
+#define DLEN_12			0x1800		/* Data Length = 12 Bits			*/
+#define DLEN_13			0x2000		/* Data Length = 13 Bits			*/
+#define DLEN_14			0x2800		/* Data Length = 14 Bits			*/
+#define DLEN_15			0x3000		/* Data Length = 15 Bits			*/
+#define DLEN_16			0x3800		/* Data Length = 16 Bits			*/
+#define DLENGTH			0x3800		/* PPI Data Length  */
+#define POLC			0x4000		/* PPI Clock Polarity				*/
+#define POLS			0x8000		/* PPI Frame Sync Polarity			*/
+
+/* PPI_STATUS Masks														*/
+#define FLD				0x0400		/* Field Indicator					*/
+#define FT_ERR			0x0800		/* Frame Track Error				*/
+#define OVR				0x1000		/* FIFO Overflow Error				*/
+#define UNDR			0x2000		/* FIFO Underrun Error				*/
+#define ERR_DET			0x4000		/* Error Detected Indicator			*/
+#define ERR_NCOR		0x8000		/* Error Not Corrected Indicator	*/
+
+
+/* Omit CAN masks from defBF534.h */
+
+/*  *******************  PIN CONTROL REGISTER MASKS  ************************/
+/* PORT_MUX Masks															*/
+#define	PJSE			0x0001			/* Port J SPI/SPORT Enable			*/
+#define	PJSE_SPORT		0x0000			/* 		Enable TFS0/DT0PRI			*/
+#define	PJSE_SPI		0x0001			/* 		Enable SPI_SSEL3:2			*/
+
+#define	PJCE(x)			(((x)&0x3)<<1)	/* Port J CAN/SPI/SPORT Enable		*/
+#define	PJCE_SPORT		0x0000			/* 		Enable DR0SEC/DT0SEC		*/
+#define	PJCE_CAN		0x0002			/* 		Enable CAN RX/TX			*/
+#define	PJCE_SPI		0x0004			/* 		Enable SPI_SSEL7			*/
+
+#define	PFDE			0x0008			/* Port F DMA Request Enable		*/
+#define	PFDE_UART		0x0000			/* 		Enable UART0 RX/TX			*/