waterDataFluctuationCorrelation fluctuationAnalysisOfFireHydrantData.c 张婷 commit at 2021-01-13

waterDataFluctuationCorrelation/fluctuationCorrelationOfFireHydrant/fluctuationAnalysisOfFireHydrantData.c

@@ -498,3 +498,128 @@ fail:
 
 	/* Read SW5 to set up NAND + keypad _or_ OneNAND (sync read).
 	 * NOTE:  SW4 bus width setting must match!
+	 */
+	if ((__raw_readb(cpld + CPLD_SWITCH) & BIT(5)) == 0) {
+		/* external keypad mux */
+		mux |= BIT(7);
+
+		platform_add_devices(dm365_evm_nand_devices,
+				ARRAY_SIZE(dm365_evm_nand_devices));
+	} else {
+		/* no OneNAND support yet */
+	}
+
+	/* Leave external chips in reset when unused. */
+	resets = BIT(3) | BIT(2) | BIT(1) | BIT(0);
+
+	/* Static video input config with SN74CBT16214 1-of-3 mux:
+	 *  - port b1 == tvp7002 (mux lowbits == 1 or 6)
+	 *  - port b2 == imager (mux lowbits == 2 or 7)
+	 *  - port b3 == tvp5146 (mux lowbits == 5)
+	 *
+	 * Runtime switching could work too, with limitations.
+	 */
+	if (have_imager()) {
+		label = "HD imager";
+		mux |= 2;
+
+		/* externally mux MMC1/ENET/AIC33 to imager */
+		mux |= BIT(6) | BIT(5) | BIT(3);
+	} else {
+		struct davinci_soc_info *soc_info = &davinci_soc_info;
+
+		/* we can use MMC1 ... */
+		dm365evm_mmc_configure();
+		davinci_setup_mmc(1, &dm365evm_mmc_config);
+
+		/* ... and ENET ... */
+		dm365evm_emac_configure();
+		soc_info->emac_pdata->phy_id = DM365_EVM_PHY_ID;
+		resets &= ~BIT(3);
+
+		/* ... and AIC33 */
+		resets &= ~BIT(1);
+
+		if (have_tvp7002()) {
+			mux |= 1;
+			resets &= ~BIT(2);
+			label = "tvp7002 HD";
+		} else {
+			/* default to tvp5146 */
+			mux |= 5;
+			resets &= ~BIT(0);
+			label = "tvp5146 SD";
+		}
+	}
+	__raw_writeb(mux, cpld + CPLD_MUX);
+	__raw_writeb(resets, cpld + CPLD_RESETS);
+	pr_info("EVM: %s video input\n", label);
+
+	/* REVISIT export switches: NTSC/PAL (SW5.6), EXTRA1 (SW5.2), etc */
+}
+
+static struct davinci_uart_config uart_config __initdata = {
+	.enabled_uarts = (1 << 0),
+};
+
+static void __init dm365_evm_map_io(void)
+{
+	/* setup input configuration for VPFE input devices */
+	dm365_set_vpfe_config(&vpfe_cfg);
+	dm365_init();
+}
+
+static struct spi_eeprom at25640 = {
+	.byte_len	= SZ_64K / 8,
+	.name		= "at25640",
+	.page_size	= 32,
+	.flags		= EE_ADDR2,
+};
+
+static struct spi_board_info dm365_evm_spi_info[] __initconst = {
+	{
+		.modalias	= "at25",
+		.platform_data	= &at25640,
+		.max_speed_hz	= 10 * 1000 * 1000,
+		.bus_num	= 0,
+		.chip_select	= 0,
+		.mode		= SPI_MODE_0,
+	},
+};
+
+static __init void dm365_evm_init(void)
+{
+	evm_init_i2c();
+	davinci_serial_init(&uart_config);
+
+	dm365evm_emac_configure();
+	dm365evm_mmc_configure();
+
+	davinci_setup_mmc(0, &dm365evm_mmc_config);
+
+	/* maybe setup mmc1/etc ... _after_ mmc0 */
+	evm_init_cpld();
+
+#ifdef CONFIG_SND_DM365_AIC3X_CODEC
+	dm365_init_asp(&dm365_evm_snd_data);
+#elif defined(CONFIG_SND_DM365_VOICE_CODEC)
+	dm365_init_vc(&dm365_evm_snd_data);
+#endif
+	dm365_init_rtc();
+	dm365_init_ks(&dm365evm_ks_data);
+
+	dm365_init_spi0(BIT(0), dm365_evm_spi_info,
+			ARRAY_SIZE(dm365_evm_spi_info));
+}
+
+MACHINE_START(DAVINCI_DM365_EVM, "DaVinci DM365 EVM")
+	.atag_offset	= 0x100,
+	.map_io		= dm365_evm_map_io,
+	.init_irq	= davinci_irq_init,
+	.timer		= &davinci_timer,
+	.init_machine	= dm365_evm_init,
+	.init_late	= davinci_init_late,
+	.dma_zone_size	= SZ_128M,
+	.restart	= davinci_restart,
+MACHINE_END
+