waterInvestigationHiddenDanger main.c 岳彩东 commit at 2021-04-25

waterInvestigationHiddenDanger/main.c

@@ -458,3 +458,90 @@ static void at91_lcdc_tft_power_control(int on)
 		at91_set_gpio_value(AT91_PIN_PA12, 0);	/* power up */
 	else
 		at91_set_gpio_value(AT91_PIN_PA12, 1);	/* power down */
+}
+
+static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
+	.lcdcon_is_backlight		= true,
+	.default_bpp			= 16,
+	.default_dmacon			= ATMEL_LCDC_DMAEN,
+	.default_lcdcon2		= AT91SAM9261_DEFAULT_TFT_LCDCON2,
+	.default_monspecs		= &at91fb_default_tft_monspecs,
+	.atmel_lcdfb_power_control	= at91_lcdc_tft_power_control,
+	.guard_time			= 1,
+#if defined(CONFIG_MACH_AT91SAM9G10EK)
+	.lcd_wiring_mode		= ATMEL_LCDC_WIRING_RGB,
+#endif
+};
+#endif
+
+#else
+static struct atmel_lcdfb_info __initdata ek_lcdc_data;
+#endif
+
+
+/*
+ * GPIO Buttons
+ */
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+static struct gpio_keys_button ek_buttons[] = {
+	{
+		.gpio		= AT91_PIN_PA27,
+		.code		= BTN_0,
+		.desc		= "Button 0",
+		.active_low	= 1,
+		.wakeup		= 1,
+	},
+	{
+		.gpio		= AT91_PIN_PA26,
+		.code		= BTN_1,
+		.desc		= "Button 1",
+		.active_low	= 1,
+		.wakeup		= 1,
+	},
+	{
+		.gpio		= AT91_PIN_PA25,
+		.code		= BTN_2,
+		.desc		= "Button 2",
+		.active_low	= 1,
+		.wakeup		= 1,
+	},
+	{
+		.gpio		= AT91_PIN_PA24,
+		.code		= BTN_3,
+		.desc		= "Button 3",
+		.active_low	= 1,
+		.wakeup		= 1,
+	}
+};
+
+static struct gpio_keys_platform_data ek_button_data = {
+	.buttons	= ek_buttons,
+	.nbuttons	= ARRAY_SIZE(ek_buttons),
+};
+
+static struct platform_device ek_button_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &ek_button_data,
+	}
+};
+
+static void __init ek_add_device_buttons(void)
+{
+	at91_set_gpio_input(AT91_PIN_PA27, 1);	/* btn0 */
+	at91_set_deglitch(AT91_PIN_PA27, 1);
+	at91_set_gpio_input(AT91_PIN_PA26, 1);	/* btn1 */
+	at91_set_deglitch(AT91_PIN_PA26, 1);
+	at91_set_gpio_input(AT91_PIN_PA25, 1);	/* btn2 */
+	at91_set_deglitch(AT91_PIN_PA25, 1);
+	at91_set_gpio_input(AT91_PIN_PA24, 1);	/* btn3 */
+	at91_set_deglitch(AT91_PIN_PA24, 1);
+
+	platform_device_register(&ek_button_device);
+}
+#else
+static void __init ek_add_device_buttons(void) {}
+#endif
+