waterDataStatistics alarmDataOperation.c 朱涛 commit at 2021-04-19

waterDataStatistics/databaseOperation/alarmDataOperation.c

@@ -3923,3 +3923,170 @@ int omap_hwmod_for_each_by_class(const char *classname,
 
 	if (!classname || !fn)
 		return -EINVAL;
+
+	pr_debug("omap_hwmod: %s: looking for modules of class %s\n",
+		 __func__, classname);
+
+	list_for_each_entry(temp_oh, &omap_hwmod_list, node) {
+		if (!strcmp(temp_oh->class->name, classname)) {
+			pr_debug("omap_hwmod: %s: %s: calling callback fn\n",
+				 __func__, temp_oh->name);
+			ret = (*fn)(temp_oh, user);
+			if (ret)
+				break;
+		}
+	}
+
+	if (ret)
+		pr_debug("omap_hwmod: %s: iterator terminated early: %d\n",
+			 __func__, ret);
+
+	return ret;
+}
+
+/**
+ * omap_hwmod_set_postsetup_state - set the post-_setup() state for this hwmod
+ * @oh: struct omap_hwmod *
+ * @state: state that _setup() should leave the hwmod in
+ *
+ * Sets the hwmod state that @oh will enter at the end of _setup()
+ * (called by omap_hwmod_setup_*()).  See also the documentation
+ * for _setup_postsetup(), above.  Returns 0 upon success or
+ * -EINVAL if there is a problem with the arguments or if the hwmod is
+ * in the wrong state.
+ */
+int omap_hwmod_set_postsetup_state(struct omap_hwmod *oh, u8 state)
+{
+	int ret;
+	unsigned long flags;
+
+	if (!oh)
+		return -EINVAL;
+
+	if (state != _HWMOD_STATE_DISABLED &&
+	    state != _HWMOD_STATE_ENABLED &&
+	    state != _HWMOD_STATE_IDLE)
+		return -EINVAL;
+
+	spin_lock_irqsave(&oh->_lock, flags);
+
+	if (oh->_state != _HWMOD_STATE_REGISTERED) {
+		ret = -EINVAL;
+		goto ohsps_unlock;
+	}
+
+	oh->_postsetup_state = state;
+	ret = 0;
+
+ohsps_unlock:
+	spin_unlock_irqrestore(&oh->_lock, flags);
+
+	return ret;
+}
+
+/**
+ * omap_hwmod_get_context_loss_count - get lost context count
+ * @oh: struct omap_hwmod *
+ *
+ * Returns the context loss count of associated @oh
+ * upon success, or zero if no context loss data is available.
+ *
+ * On OMAP4, this queries the per-hwmod context loss register,
+ * assuming one exists.  If not, or on OMAP2/3, this queries the
+ * enclosing powerdomain context loss count.
+ */
+int omap_hwmod_get_context_loss_count(struct omap_hwmod *oh)
+{
+	struct powerdomain *pwrdm;
+	int ret = 0;
+
+	if (soc_ops.get_context_lost)
+		return soc_ops.get_context_lost(oh);
+
+	pwrdm = omap_hwmod_get_pwrdm(oh);
+	if (pwrdm)
+		ret = pwrdm_get_context_loss_count(pwrdm);
+
+	return ret;
+}
+
+/**
+ * omap_hwmod_no_setup_reset - prevent a hwmod from being reset upon setup
+ * @oh: struct omap_hwmod *
+ *
+ * Prevent the hwmod @oh from being reset during the setup process.
+ * Intended for use by board-*.c files on boards with devices that
+ * cannot tolerate being reset.  Must be called before the hwmod has
+ * been set up.  Returns 0 upon success or negative error code upon
+ * failure.
+ */
+int omap_hwmod_no_setup_reset(struct omap_hwmod *oh)
+{
+	if (!oh)
+		return -EINVAL;
+
+	if (oh->_state != _HWMOD_STATE_REGISTERED) {
+		pr_err("omap_hwmod: %s: cannot prevent setup reset; in wrong state\n",
+			oh->name);
+		return -EINVAL;
+	}
+
+	oh->flags |= HWMOD_INIT_NO_RESET;
+
+	return 0;
+}
+
+/**
+ * omap_hwmod_pad_route_irq - route an I/O pad wakeup to a particular MPU IRQ
+ * @oh: struct omap_hwmod * containing hwmod mux entries
+ * @pad_idx: array index in oh->mux of the hwmod mux entry to route wakeup
+ * @irq_idx: the hwmod mpu_irqs array index of the IRQ to trigger on wakeup
+ *
+ * When an I/O pad wakeup arrives for the dynamic or wakeup hwmod mux
+ * entry number @pad_idx for the hwmod @oh, trigger the interrupt
+ * service routine for the hwmod's mpu_irqs array index @irq_idx.  If
+ * this function is not called for a given pad_idx, then the ISR
+ * associated with @oh's first MPU IRQ will be triggered when an I/O
+ * pad wakeup occurs on that pad.  Note that @pad_idx is the index of
+ * the _dynamic or wakeup_ entry: if there are other entries not
+ * marked with OMAP_DEVICE_PAD_WAKEUP or OMAP_DEVICE_PAD_REMUX, these
+ * entries are NOT COUNTED in the dynamic pad index.  This function
+ * must be called separately for each pad that requires its interrupt
+ * to be re-routed this way.  Returns -EINVAL if there is an argument
+ * problem or if @oh does not have hwmod mux entries or MPU IRQs;
+ * returns -ENOMEM if memory cannot be allocated; or 0 upon success.
+ *
+ * XXX This function interface is fragile.  Rather than using array
+ * indexes, which are subject to unpredictable change, it should be
+ * using hwmod IRQ names, and some other stable key for the hwmod mux
+ * pad records.
+ */
+int omap_hwmod_pad_route_irq(struct omap_hwmod *oh, int pad_idx, int irq_idx)
+{
+	int nr_irqs;
+
+	might_sleep();
+
+	if (!oh || !oh->mux || !oh->mpu_irqs || pad_idx < 0 ||
+	    pad_idx >= oh->mux->nr_pads_dynamic)
+		return -EINVAL;
+
+	/* Check the number of available mpu_irqs */
+	for (nr_irqs = 0; oh->mpu_irqs[nr_irqs].irq >= 0; nr_irqs++)
+		;
+
+	if (irq_idx >= nr_irqs)
+		return -EINVAL;
+
+	if (!oh->mux->irqs) {
+		/* XXX What frees this? */
+		oh->mux->irqs = kzalloc(sizeof(int) * oh->mux->nr_pads_dynamic,
+			GFP_KERNEL);
+		if (!oh->mux->irqs)
+			return -ENOMEM;
+	}
+	oh->mux->irqs[pad_idx] = irq_idx;
+
+	return 0;
+}
+