waterInvestigationHiddenDanger rtuDataOperation.c 徐寅秋 commit at 2021-03-15

waterInvestigationHiddenDanger/databaseOperation/rtuDataOperation.c

@@ -361,3 +361,65 @@ static struct twl4030_platform_data sdp3430_twldata = {
 	/* platform_data for children goes here */
 	.gpio		= &sdp3430_gpio_data,
 	.keypad		= &sdp3430_kp_data,
+
+	.vaux1		= &sdp3430_vaux1,
+	.vaux2		= &sdp3430_vaux2,
+	.vaux3		= &sdp3430_vaux3,
+	.vaux4		= &sdp3430_vaux4,
+	.vmmc1		= &sdp3430_vmmc1,
+	.vmmc2		= &sdp3430_vmmc2,
+	.vsim		= &sdp3430_vsim,
+};
+
+static int __init omap3430_i2c_init(void)
+{
+	/* i2c1 for PMIC only */
+	omap3_pmic_get_config(&sdp3430_twldata,
+			TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_BCI |
+			TWL_COMMON_PDATA_MADC | TWL_COMMON_PDATA_AUDIO,
+			TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
+	sdp3430_twldata.vdac->constraints.apply_uV = true;
+	sdp3430_twldata.vpll2->constraints.apply_uV = true;
+	sdp3430_twldata.vpll2->constraints.name = "VDVI";
+
+	omap3_pmic_init("twl4030", &sdp3430_twldata);
+
+	/* i2c2 on camera connector (for sensor control) and optional isp1301 */
+	omap_register_i2c_bus(2, 400, NULL, 0);
+	/* i2c3 on display connector (for DVI, tfp410) */
+	omap_register_i2c_bus(3, 400, NULL, 0);
+	return 0;
+}
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+
+static struct omap_smc91x_platform_data board_smc91x_data = {
+	.cs		= 3,
+	.flags		= GPMC_MUX_ADD_DATA | GPMC_TIMINGS_SMC91C96 |
+				IORESOURCE_IRQ_LOWLEVEL,
+};
+
+static void __init board_smc91x_init(void)
+{
+	if (omap_rev() > OMAP3430_REV_ES1_0)
+		board_smc91x_data.gpio_irq = 6;
+	else
+		board_smc91x_data.gpio_irq = 29;
+
+	gpmc_smc91x_init(&board_smc91x_data);
+}
+
+#else
+
+static inline void board_smc91x_init(void)
+{
+}
+
+#endif
+
+static void enable_board_wakeup_source(void)
+{
+	/* T2 interrupt line (keypad) */
+	omap_mux_init_signal("sys_nirq",
+		OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP);
+}