waterDataStatisticsCrossAssociation hiddenDangerAnalysis.c 吉超博 commit at 2021-02-08

waterDataStatisticsCrossAssociation/dataAssociation/hiddenDangerAnalysis.c

@@ -508,3 +508,128 @@ struct platform_device zeus_max6369_device = {
 };
 
 static struct platform_device *zeus_devices[] __initdata = {
+	&zeus_serial_device,
+	&zeus_mtd_devices[0],
+	&zeus_dm9k0_device,
+	&zeus_dm9k1_device,
+	&zeus_sram_device,
+	&zeus_leds_device,
+	&zeus_pcmcia_device,
+	&zeus_max6369_device,
+};
+
+/* AC'97 */
+static pxa2xx_audio_ops_t zeus_ac97_info = {
+	.reset_gpio = 95,
+};
+
+
+/*
+ * USB host
+ */
+
+static int zeus_ohci_init(struct device *dev)
+{
+	int err;
+
+	/* Switch on port 2. */
+	if ((err = gpio_request(ZEUS_USB2_PWREN_GPIO, "USB2_PWREN"))) {
+		dev_err(dev, "Can't request USB2_PWREN\n");
+		return err;
+	}
+
+	if ((err = gpio_direction_output(ZEUS_USB2_PWREN_GPIO, 1))) {
+		gpio_free(ZEUS_USB2_PWREN_GPIO);
+		dev_err(dev, "Can't enable USB2_PWREN\n");
+		return err;
+	}
+
+	/* Port 2 is shared between host and client interface. */
+	UP2OCR = UP2OCR_HXOE | UP2OCR_HXS | UP2OCR_DMPDE | UP2OCR_DPPDE;
+
+	return 0;
+}
+
+static void zeus_ohci_exit(struct device *dev)
+{
+	/* Power-off port 2 */
+	gpio_direction_output(ZEUS_USB2_PWREN_GPIO, 0);
+	gpio_free(ZEUS_USB2_PWREN_GPIO);
+}
+
+static struct pxaohci_platform_data zeus_ohci_platform_data = {
+	.port_mode	= PMM_NPS_MODE,
+	/* Clear Power Control Polarity Low and set Power Sense
+	 * Polarity Low. Supply power to USB ports. */
+	.flags		= ENABLE_PORT_ALL | POWER_SENSE_LOW,
+	.init		= zeus_ohci_init,
+	.exit		= zeus_ohci_exit,
+};
+
+/*
+ * Flat Panel
+ */
+
+static void zeus_lcd_power(int on, struct fb_var_screeninfo *si)
+{
+	gpio_set_value(ZEUS_LCD_EN_GPIO, on);
+}
+
+static void zeus_backlight_power(int on)
+{
+	gpio_set_value(ZEUS_BKLEN_GPIO, on);
+}
+
+static int zeus_setup_fb_gpios(void)
+{
+	int err;
+
+	if ((err = gpio_request(ZEUS_LCD_EN_GPIO, "LCD_EN")))
+		goto out_err;
+
+	if ((err = gpio_direction_output(ZEUS_LCD_EN_GPIO, 0)))
+		goto out_err_lcd;
+
+	if ((err = gpio_request(ZEUS_BKLEN_GPIO, "BKLEN")))
+		goto out_err_lcd;
+
+	if ((err = gpio_direction_output(ZEUS_BKLEN_GPIO, 0)))
+		goto out_err_bkl;
+
+	return 0;
+
+out_err_bkl:
+	gpio_free(ZEUS_BKLEN_GPIO);
+out_err_lcd:
+	gpio_free(ZEUS_LCD_EN_GPIO);
+out_err:
+	return err;
+}
+
+static struct pxafb_mode_info zeus_fb_mode_info[] = {
+	{
+		.pixclock       = 39722,
+
+		.xres           = 640,
+		.yres           = 480,
+
+		.bpp            = 16,
+
+		.hsync_len      = 63,
+		.left_margin    = 16,
+		.right_margin   = 81,
+
+		.vsync_len      = 2,
+		.upper_margin   = 12,
+		.lower_margin   = 31,
+
+		.sync		= 0,
+	},
+};
+
+static struct pxafb_mach_info zeus_fb_info = {
+	.modes			= zeus_fb_mode_info,
+	.num_modes		= 1,
+	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+	.pxafb_lcd_power	= zeus_lcd_power,
+	.pxafb_backlight_power	= zeus_backlight_power,