efElectricAgingTrendMining cablePowerDataOperation.c 韩正义 commit at 2020-10-23

efElectricAgingTrendMining/databaseOperation/cablePowerDataOperation.c

@@ -243,3 +243,119 @@ static struct gpio_led sdp4430_gpio_leds[] = {
 
 static struct gpio_keys_button sdp4430_gpio_keys[] = {
 	{
+		.desc			= "Proximity Sensor",
+		.type			= EV_SW,
+		.code			= SW_FRONT_PROXIMITY,
+		.gpio			= OMAP4_SFH7741_SENSOR_OUTPUT_GPIO,
+		.active_low		= 0,
+	}
+};
+
+static struct gpio_led_platform_data sdp4430_led_data = {
+	.leds	= sdp4430_gpio_leds,
+	.num_leds	= ARRAY_SIZE(sdp4430_gpio_leds),
+};
+
+static struct led_pwm sdp4430_pwm_leds[] = {
+	{
+		.name		= "omap4:green:chrg",
+		.pwm_id		= 1,
+		.max_brightness	= 255,
+		.pwm_period_ns	= 7812500,
+	},
+};
+
+static struct led_pwm_platform_data sdp4430_pwm_data = {
+	.num_leds	= ARRAY_SIZE(sdp4430_pwm_leds),
+	.leds		= sdp4430_pwm_leds,
+};
+
+static struct platform_device sdp4430_leds_pwm = {
+	.name	= "leds_pwm",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &sdp4430_pwm_data,
+	},
+};
+
+static int omap_prox_activate(struct device *dev)
+{
+	gpio_set_value(OMAP4_SFH7741_ENABLE_GPIO , 1);
+	return 0;
+}
+
+static void omap_prox_deactivate(struct device *dev)
+{
+	gpio_set_value(OMAP4_SFH7741_ENABLE_GPIO , 0);
+}
+
+static struct gpio_keys_platform_data sdp4430_gpio_keys_data = {
+	.buttons	= sdp4430_gpio_keys,
+	.nbuttons	= ARRAY_SIZE(sdp4430_gpio_keys),
+	.enable		= omap_prox_activate,
+	.disable	= omap_prox_deactivate,
+};
+
+static struct platform_device sdp4430_gpio_keys_device = {
+	.name	= "gpio-keys",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &sdp4430_gpio_keys_data,
+	},
+};
+
+static struct platform_device sdp4430_leds_gpio = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &sdp4430_led_data,
+	},
+};
+static struct spi_board_info sdp4430_spi_board_info[] __initdata = {
+	{
+		.modalias               = "ks8851",
+		.bus_num                = 1,
+		.chip_select            = 0,
+		.max_speed_hz           = 24000000,
+		/*
+		 * .irq is set to gpio_to_irq(ETH_KS8851_IRQ)
+		 * in omap_4430sdp_init
+		 */
+	},
+};
+
+static struct gpio sdp4430_eth_gpios[] __initdata = {
+	{ ETH_KS8851_POWER_ON,	GPIOF_OUT_INIT_HIGH,	"eth_power"	},
+	{ ETH_KS8851_QUART,	GPIOF_OUT_INIT_HIGH,	"quart"		},
+	{ ETH_KS8851_IRQ,	GPIOF_IN,		"eth_irq"	},
+};
+
+static int __init omap_ethernet_init(void)
+{
+	int status;
+
+	/* Request of GPIO lines */
+	status = gpio_request_array(sdp4430_eth_gpios,
+				    ARRAY_SIZE(sdp4430_eth_gpios));
+	if (status)
+		pr_err("Cannot request ETH GPIOs\n");
+
+	return status;
+}
+
+static struct regulator_consumer_supply sdp4430_vbat_supply[] = {
+	REGULATOR_SUPPLY("vddvibl", "twl6040-vibra"),
+	REGULATOR_SUPPLY("vddvibr", "twl6040-vibra"),
+};
+
+static struct regulator_init_data sdp4430_vbat_data = {
+	.constraints = {
+		.always_on	= 1,
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(sdp4430_vbat_supply),
+	.consumer_supplies	= sdp4430_vbat_supply,
+};
+
+static struct fixed_voltage_config sdp4430_vbat_pdata = {
+	.supply_name	= "VBAT",
+	.microvolts	= 3750000,