waterHeterogeneousDataSynchronization alarmMemoryDefinition.c 袁开兴 commit at 2020-10-20

waterHeterogeneousDataSynchronization/dataSharedMemory/alarmMemoryDefinition.c

@@ -77,3 +77,110 @@ static struct fixed_voltage_config snowball_gpio_en_3v3_data = {
        .supply_name            = "EN-3V3",
        .gpio                   = SNOWBALL_EN_3V3_ETH_GPIO,
        .microvolts             = 3300000,
+       .enable_high            = 1,
+       .init_data              = &gpio_en_3v3_regulator,
+       .startup_delay          = 5000, /* 1200us */
+};
+
+static struct platform_device snowball_gpio_en_3v3_regulator_dev = {
+       .name   = "reg-fixed-voltage",
+       .id     = 1,
+       .dev    = {
+               .platform_data  = &snowball_gpio_en_3v3_data,
+       },
+};
+
+static struct ab8500_gpio_platform_data ab8500_gpio_pdata = {
+	.gpio_base		= MOP500_AB8500_PIN_GPIO(1),
+	.irq_base		= MOP500_AB8500_VIR_GPIO_IRQ_BASE,
+	/* config_reg is the initial configuration of ab8500 pins.
+	 * The pins can be configured as GPIO or alt functions based
+	 * on value present in GpioSel1 to GpioSel6 and AlternatFunction
+	 * register. This is the array of 7 configuration settings.
+	 * One has to compile time decide these settings. Below is the
+	 * explanation of these setting
+	 * GpioSel1 = 0x00 => Pins GPIO1 to GPIO8 are not used as GPIO
+	 * GpioSel2 = 0x1E => Pins GPIO10 to GPIO13 are configured as GPIO
+	 * GpioSel3 = 0x80 => Pin GPIO24 is configured as GPIO
+	 * GpioSel4 = 0x01 => Pin GPIo25 is configured as GPIO
+	 * GpioSel5 = 0x7A => Pins GPIO34, GPIO36 to GPIO39 are conf as GPIO
+	 * GpioSel6 = 0x00 => Pins GPIO41 & GPIo42 are not configured as GPIO
+	 * AlternaFunction = 0x00 => If Pins GPIO10 to 13 are not configured
+	 * as GPIO then this register selectes the alternate fucntions
+	 */
+	.config_reg		= {0x00, 0x1E, 0x80, 0x01,
+					0x7A, 0x00, 0x00},
+};
+
+/* ab8500-codec */
+static struct ab8500_codec_platform_data ab8500_codec_pdata = {
+	.amics =  {
+		.mic1_type = AMIC_TYPE_DIFFERENTIAL,
+		.mic2_type = AMIC_TYPE_DIFFERENTIAL,
+		.mic1a_micbias = AMIC_MICBIAS_VAMIC1,
+		.mic1b_micbias = AMIC_MICBIAS_VAMIC1,
+		.mic2_micbias = AMIC_MICBIAS_VAMIC2
+	},
+	.ear_cmv = EAR_CMV_0_95V
+};
+
+static struct gpio_keys_button snowball_key_array[] = {
+	{
+		.gpio           = 32,
+		.type           = EV_KEY,
+		.code           = KEY_1,
+		.desc           = "userpb",
+		.active_low     = 1,
+		.debounce_interval = 50,
+		.wakeup         = 1,
+	},
+	{
+		.gpio           = 151,
+		.type           = EV_KEY,
+		.code           = KEY_2,
+		.desc           = "extkb1",
+		.active_low     = 1,
+		.debounce_interval = 50,
+		.wakeup         = 1,
+	},
+	{
+		.gpio           = 152,
+		.type           = EV_KEY,
+		.code           = KEY_3,
+		.desc           = "extkb2",
+		.active_low     = 1,
+		.debounce_interval = 50,
+		.wakeup         = 1,
+	},
+	{
+		.gpio           = 161,
+		.type           = EV_KEY,
+		.code           = KEY_4,
+		.desc           = "extkb3",
+		.active_low     = 1,
+		.debounce_interval = 50,
+		.wakeup         = 1,
+	},
+	{
+		.gpio           = 162,
+		.type           = EV_KEY,
+		.code           = KEY_5,
+		.desc           = "extkb4",
+		.active_low     = 1,
+		.debounce_interval = 50,
+		.wakeup         = 1,
+	},
+};
+
+static struct gpio_keys_platform_data snowball_key_data = {
+	.buttons        = snowball_key_array,
+	.nbuttons       = ARRAY_SIZE(snowball_key_array),
+};
+
+static struct platform_device snowball_key_dev = {
+	.name           = "gpio-keys",
+	.id             = -1,
+	.dev            = {
+		.platform_data  = &snowball_key_data,
+	}
+};