waterDataStatisticsCrossAssociation preliminaryDataProcessing.c 韩正义 commit at 2020-12-09

waterDataStatisticsCrossAssociation/monitoringDataProcessing/preliminaryDataProcessing.c

@@ -235,3 +235,102 @@ void omap44xx_prm_save_and_clear_irqen(u32 *saved_mask)
 					OMAP4_PRM_IRQSTATUS_MPU_2_OFFSET);
 
 	omap4_prm_write_inst_reg(0, OMAP4430_PRM_OCP_SOCKET_INST,
+				 OMAP4_PRM_IRQENABLE_MPU_OFFSET);
+	omap4_prm_write_inst_reg(0, OMAP4430_PRM_OCP_SOCKET_INST,
+				 OMAP4_PRM_IRQENABLE_MPU_2_OFFSET);
+
+	/* OCP barrier */
+	omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST,
+				OMAP4_REVISION_PRM_OFFSET);
+}
+
+/**
+ * omap44xx_prm_restore_irqen - set PRM_IRQENABLE_MPU* registers from args
+ * @saved_mask: ptr to a u32 array of IRQENABLE bits saved previously
+ *
+ * Restore the PRM_IRQENABLE_MPU and PRM_IRQENABLE_MPU_2 registers from
+ * @saved_mask.  Intended to be used in the PRM interrupt handler resume
+ * callback to restore values saved by omap44xx_prm_save_and_clear_irqen().
+ * No OCP barrier should be needed here; any pending PRM interrupts will fire
+ * once the writes reach the PRM.  No return value.
+ */
+void omap44xx_prm_restore_irqen(u32 *saved_mask)
+{
+	omap4_prm_write_inst_reg(saved_mask[0], OMAP4430_PRM_OCP_SOCKET_INST,
+				 OMAP4_PRM_IRQENABLE_MPU_OFFSET);
+	omap4_prm_write_inst_reg(saved_mask[1], OMAP4430_PRM_OCP_SOCKET_INST,
+				 OMAP4_PRM_IRQENABLE_MPU_2_OFFSET);
+}
+
+/**
+ * omap44xx_prm_reconfigure_io_chain - clear latches and reconfigure I/O chain
+ *
+ * Clear any previously-latched I/O wakeup events and ensure that the
+ * I/O wakeup gates are aligned with the current mux settings.  Works
+ * by asserting WUCLKIN, waiting for WUCLKOUT to be asserted, and then
+ * deasserting WUCLKIN and waiting for WUCLKOUT to be deasserted.
+ * No return value. XXX Are the final two steps necessary?
+ */
+void omap44xx_prm_reconfigure_io_chain(void)
+{
+	int i = 0;
+
+	/* Trigger WUCLKIN enable */
+	omap4_prm_rmw_inst_reg_bits(OMAP4430_WUCLK_CTRL_MASK,
+				    OMAP4430_WUCLK_CTRL_MASK,
+				    OMAP4430_PRM_DEVICE_INST,
+				    OMAP4_PRM_IO_PMCTRL_OFFSET);
+	omap_test_timeout(
+		(((omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST,
+					   OMAP4_PRM_IO_PMCTRL_OFFSET) &
+		   OMAP4430_WUCLK_STATUS_MASK) >>
+		  OMAP4430_WUCLK_STATUS_SHIFT) == 1),
+		MAX_IOPAD_LATCH_TIME, i);
+	if (i == MAX_IOPAD_LATCH_TIME)
+		pr_warn("PRM: I/O chain clock line assertion timed out\n");
+
+	/* Trigger WUCLKIN disable */
+	omap4_prm_rmw_inst_reg_bits(OMAP4430_WUCLK_CTRL_MASK, 0x0,
+				    OMAP4430_PRM_DEVICE_INST,
+				    OMAP4_PRM_IO_PMCTRL_OFFSET);
+	omap_test_timeout(
+		(((omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST,
+					   OMAP4_PRM_IO_PMCTRL_OFFSET) &
+		   OMAP4430_WUCLK_STATUS_MASK) >>
+		  OMAP4430_WUCLK_STATUS_SHIFT) == 0),
+		MAX_IOPAD_LATCH_TIME, i);
+	if (i == MAX_IOPAD_LATCH_TIME)
+		pr_warn("PRM: I/O chain clock line deassertion timed out\n");
+
+	return;
+}
+
+/**
+ * omap44xx_prm_enable_io_wakeup - enable wakeup events from I/O wakeup latches
+ *
+ * Activates the I/O wakeup event latches and allows events logged by
+ * those latches to signal a wakeup event to the PRCM.  For I/O wakeups
+ * to occur, WAKEUPENABLE bits must be set in the pad mux registers, and
+ * omap44xx_prm_reconfigure_io_chain() must be called.  No return value.
+ */
+static void __init omap44xx_prm_enable_io_wakeup(void)
+{
+	omap4_prm_rmw_inst_reg_bits(OMAP4430_GLOBAL_WUEN_MASK,
+				    OMAP4430_GLOBAL_WUEN_MASK,
+				    OMAP4430_PRM_DEVICE_INST,
+				    OMAP4_PRM_IO_PMCTRL_OFFSET);
+}
+
+/**
+ * omap44xx_prm_read_reset_sources - return the last SoC reset source
+ *
+ * Return a u32 representing the last reset sources of the SoC.  The
+ * returned reset source bits are standardized across OMAP SoCs.
+ */
+static u32 omap44xx_prm_read_reset_sources(void)
+{
+	struct prm_reset_src_map *p;
+	u32 r = 0;
+	u32 v;
+
+	v = omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST,