waterDataDiscreteRateMining synchronousMemoryDatabase.c 徐寅秋 commit at 2020-12-07

waterDataDiscreteRateMining/varianceCalculation/synchronousMemoryDatabase.c

@@ -178,3 +178,167 @@ static void bonito_fpga_init(void)
 	}
 
 	irq_set_chained_handler(evt2irq(0x0340), bonito_fpga_irq_demux);
+	irq_set_irq_type(evt2irq(0x0340), IRQ_TYPE_LEVEL_LOW);
+}
+
+/*
+* PMIC settings
+*
+* FIXME
+*
+* bonito board needs some settings by pmic which use i2c access.
+* pmic settings use device_initcall() here for use it.
+*/
+static __u8 *pmic_settings = NULL;
+static __u8 pmic_do_2A[] = {
+	0x1C, 0x09,
+	0x1A, 0x80,
+	0xff, 0xff,
+};
+
+static int __init pmic_init(void)
+{
+	struct i2c_adapter *a = i2c_get_adapter(0);
+	struct i2c_msg msg;
+	__u8 buf[2];
+	int i, ret;
+
+	if (!pmic_settings)
+		return 0;
+	if (!a)
+		return 0;
+
+	msg.addr	= 0x46;
+	msg.buf		= buf;
+	msg.len		= 2;
+	msg.flags	= 0;
+
+	for (i = 0; ; i += 2) {
+		buf[0] = pmic_settings[i + 0];
+		buf[1] = pmic_settings[i + 1];
+
+		if ((0xff == buf[0]) && (0xff == buf[1]))
+			break;
+
+		ret = i2c_transfer(a, &msg, 1);
+		if (ret < 0) {
+			pr_err("i2c transfer fail\n");
+			break;
+		}
+	}
+
+	return 0;
+}
+device_initcall(pmic_init);
+
+/*
+ * LCDC0
+ */
+static const struct fb_videomode lcdc0_mode = {
+	.name		= "WVGA Panel",
+	.xres		= 800,
+	.yres		= 480,
+	.left_margin	= 88,
+	.right_margin	= 40,
+	.hsync_len	= 128,
+	.upper_margin	= 20,
+	.lower_margin	= 5,
+	.vsync_len	= 5,
+	.sync		= 0,
+};
+
+static struct sh_mobile_lcdc_info lcdc0_info = {
+	.clock_source	= LCDC_CLK_BUS,
+	.ch[0] = {
+		.chan			= LCDC_CHAN_MAINLCD,
+		.fourcc = V4L2_PIX_FMT_RGB565,
+		.interface_type		= RGB24,
+		.clock_divider		= 5,
+		.flags			= 0,
+		.lcd_modes		= &lcdc0_mode,
+		.num_modes		= 1,
+		.panel_cfg = {
+			.width	= 152,
+			.height = 91,
+		},
+	},
+};
+
+static struct resource lcdc0_resources[] = {
+	[0] = {
+		.name	= "LCDC0",
+		.start	= 0xfe940000,
+		.end	= 0xfe943fff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= intcs_evt2irq(0x0580),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device lcdc0_device = {
+	.name		= "sh_mobile_lcdc_fb",
+	.id		= 0,
+	.resource	= lcdc0_resources,
+	.num_resources	= ARRAY_SIZE(lcdc0_resources),
+	.dev	= {
+		.platform_data	= &lcdc0_info,
+		.coherent_dma_mask = ~0,
+	},
+};
+
+/*
+ * SMSC 9221
+ */
+static struct resource smsc_resources[] = {
+	[0] = {
+		.start		= 0x18010000,
+		.end		= 0x18011000 - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= FPGA_ETH_IRQ,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct smsc911x_platform_config smsc_platdata = {
+	.flags		= SMSC911X_USE_16BIT,
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
+};
+
+static struct platform_device smsc_device = {
+	.name		= "smsc911x",
+	.dev  = {
+		.platform_data = &smsc_platdata,
+	},
+	.resource	= smsc_resources,
+	.num_resources	= ARRAY_SIZE(smsc_resources),
+};
+
+/*
+ * core board devices
+ */
+static struct platform_device *bonito_core_devices[] __initdata = {
+};
+
+/*
+ * base board devices
+ */
+static struct platform_device *bonito_base_devices[] __initdata = {
+	&lcdc0_device,
+	&smsc_device,
+};
+
+/*
+ * map I/O
+ */
+static struct map_desc bonito_io_desc[] __initdata = {
+	/*
+	 * for FPGA (0x1800000-0x19ffffff)
+	 * 0x18000000-0x18002000 -> 0xf0003000-0xf0005000
+	 */
+	{