waterDataFluctuationCorrelation hiddenDangerAnalysis.c 吉超博 commit at 2021-02-03

waterDataFluctuationCorrelation/fluctuationCorrelationOfSprayEnd/hiddenDangerAnalysis.c

@@ -1298,3 +1298,87 @@ static struct vpif_display_config da850_vpif_display_config = {
 		.output_count = ARRAY_SIZE(da850_ch0_outputs),
 	},
 	.card_name    = "DA850/OMAP-L138 Video Display",
+};
+
+static __init void da850_vpif_init(void)
+{
+	int ret;
+
+	ret = da850_register_vpif();
+	if (ret)
+		pr_warn("da850_evm_init: VPIF setup failed: %d\n", ret);
+
+	ret = davinci_cfg_reg_list(da850_vpif_capture_pins);
+	if (ret)
+		pr_warn("da850_evm_init: VPIF capture mux setup failed: %d\n",
+			ret);
+
+	ret = da850_register_vpif_capture(&da850_vpif_capture_config);
+	if (ret)
+		pr_warn("da850_evm_init: VPIF capture setup failed: %d\n", ret);
+
+	ret = davinci_cfg_reg_list(da850_vpif_display_pins);
+	if (ret)
+		pr_warn("da850_evm_init: VPIF display mux setup failed: %d\n",
+			ret);
+
+	ret = da850_register_vpif_display(&da850_vpif_display_config);
+	if (ret)
+		pr_warn("da850_evm_init: VPIF display setup failed: %d\n", ret);
+}
+
+#else
+static __init void da850_vpif_init(void) {}
+#endif
+
+#ifdef CONFIG_DA850_WL12XX
+
+static void wl12xx_set_power(int index, bool power_on)
+{
+	static bool power_state;
+
+	pr_debug("Powering %s wl12xx", power_on ? "on" : "off");
+
+	if (power_on == power_state)
+		return;
+	power_state = power_on;
+
+	if (power_on) {
+		/* Power up sequence required for wl127x devices */
+		gpio_set_value(DA850_WLAN_EN, 1);
+		usleep_range(15000, 15000);
+		gpio_set_value(DA850_WLAN_EN, 0);
+		usleep_range(1000, 1000);
+		gpio_set_value(DA850_WLAN_EN, 1);
+		msleep(70);
+	} else {
+		gpio_set_value(DA850_WLAN_EN, 0);
+	}
+}
+
+static struct davinci_mmc_config da850_wl12xx_mmc_config = {
+	.set_power	= wl12xx_set_power,
+	.wires		= 4,
+	.max_freq	= 25000000,
+	.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_NONREMOVABLE |
+			  MMC_CAP_POWER_OFF_CARD,
+	.version	= MMC_CTLR_VERSION_2,
+};
+
+static const short da850_wl12xx_pins[] __initconst = {
+	DA850_MMCSD1_DAT_0, DA850_MMCSD1_DAT_1, DA850_MMCSD1_DAT_2,
+	DA850_MMCSD1_DAT_3, DA850_MMCSD1_CLK, DA850_MMCSD1_CMD,
+	DA850_GPIO6_9, DA850_GPIO6_10,
+	-1
+};
+
+static struct wl12xx_platform_data da850_wl12xx_wlan_data __initdata = {
+	.irq			= -1,
+	.board_ref_clock	= WL12XX_REFCLOCK_38,
+	.platform_quirks	= WL12XX_PLATFORM_QUIRK_EDGE_IRQ,
+};
+
+static __init int da850_wl12xx_init(void)
+{
+	int ret;
+