efDataStatistics synchronousMemoryDatabase.c 张芬 commit at 2021-03-22

efDataStatistics/calculationOfAlarmUnprocessedData/synchronousMemoryDatabase.c

@@ -298,3 +298,166 @@ static struct omap_usb_config innovator1510_usb_config __initdata = {
 	.pins[1]	= 6,
 	.pins[2]	= 6,		/* Conflicts with UART2 */
 
+	.register_dev	= 1,
+	.pins[0]	= 2,
+};
+
+static struct omap_lcd_config innovator1510_lcd_config __initdata = {
+	.ctrl_name	= "internal",
+};
+#endif
+
+#ifdef CONFIG_ARCH_OMAP16XX
+static struct omap_usb_config h2_usb_config __initdata = {
+	/* usb1 has a Mini-AB port and external isp1301 transceiver */
+	.otg		= 2,
+
+#ifdef	CONFIG_USB_GADGET_OMAP
+	.hmc_mode	= 19,	/* 0:host(off) 1:dev|otg 2:disabled */
+	/* .hmc_mode	= 21,*/	/* 0:host(off) 1:dev(loopback) 2:host(loopback) */
+#elif	defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+	/* NONSTANDARD CABLE NEEDED (B-to-Mini-B) */
+	.hmc_mode	= 20,	/* 1:dev|otg(off) 1:host 2:disabled */
+#endif
+
+	.pins[1]	= 3,
+};
+
+static struct omap_lcd_config innovator1610_lcd_config __initdata = {
+	.ctrl_name	= "internal",
+};
+#endif
+
+#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+
+static int mmc_set_power(struct device *dev, int slot, int power_on,
+				int vdd)
+{
+	if (power_on)
+		__raw_writeb(__raw_readb(OMAP1510_FPGA_POWER) | (1 << 3),
+				OMAP1510_FPGA_POWER);
+	else
+		__raw_writeb(__raw_readb(OMAP1510_FPGA_POWER) & ~(1 << 3),
+				OMAP1510_FPGA_POWER);
+
+	return 0;
+}
+
+/*
+ * Innovator could use the following functions tested:
+ * - mmc_get_wp that uses OMAP_MPUIO(3)
+ * - mmc_get_cover_state that uses FPGA F4 UIO43
+ */
+static struct omap_mmc_platform_data mmc1_data = {
+	.nr_slots                       = 1,
+	.slots[0]       = {
+		.set_power		= mmc_set_power,
+		.wires			= 4,
+		.name                   = "mmcblk",
+	},
+};
+
+static struct omap_mmc_platform_data *mmc_data[OMAP16XX_NR_MMC];
+
+static void __init innovator_mmc_init(void)
+{
+	mmc_data[0] = &mmc1_data;
+	omap1_init_mmc(mmc_data, OMAP15XX_NR_MMC);
+}
+
+#else
+static inline void innovator_mmc_init(void)
+{
+}
+#endif
+
+static void __init innovator_init(void)
+{
+	if (cpu_is_omap1510())
+		omap1510_fpga_init_irq();
+	innovator_init_smc91x();
+
+#ifdef CONFIG_ARCH_OMAP15XX
+	if (cpu_is_omap1510()) {
+		unsigned char reg;
+
+		/* mux pins for uarts */
+		omap_cfg_reg(UART1_TX);
+		omap_cfg_reg(UART1_RTS);
+		omap_cfg_reg(UART2_TX);
+		omap_cfg_reg(UART2_RTS);
+		omap_cfg_reg(UART3_TX);
+		omap_cfg_reg(UART3_RX);
+
+		reg = __raw_readb(OMAP1510_FPGA_POWER);
+		reg |= OMAP1510_FPGA_PCR_COM1_EN;
+		__raw_writeb(reg, OMAP1510_FPGA_POWER);
+		udelay(10);
+
+		reg = __raw_readb(OMAP1510_FPGA_POWER);
+		reg |= OMAP1510_FPGA_PCR_COM2_EN;
+		__raw_writeb(reg, OMAP1510_FPGA_POWER);
+		udelay(10);
+
+		platform_add_devices(innovator1510_devices, ARRAY_SIZE(innovator1510_devices));
+		spi_register_board_info(innovator1510_boardinfo,
+				ARRAY_SIZE(innovator1510_boardinfo));
+	}
+#endif
+#ifdef CONFIG_ARCH_OMAP16XX
+	if (!cpu_is_omap1510()) {
+		innovator1610_smc91x_resources[1].start = gpio_to_irq(0);
+		innovator1610_smc91x_resources[1].end = gpio_to_irq(0);
+		platform_add_devices(innovator1610_devices, ARRAY_SIZE(innovator1610_devices));
+	}
+#endif
+
+#ifdef CONFIG_ARCH_OMAP15XX
+	if (cpu_is_omap1510()) {
+		omap1_usb_init(&innovator1510_usb_config);
+		omapfb_set_lcd_config(&innovator1510_lcd_config);
+	}
+#endif
+#ifdef CONFIG_ARCH_OMAP16XX
+	if (cpu_is_omap1610()) {
+		omap1_usb_init(&h2_usb_config);
+		omapfb_set_lcd_config(&innovator1610_lcd_config);
+	}
+#endif
+	omap_serial_init();
+	omap_register_i2c_bus(1, 100, NULL, 0);
+	innovator_mmc_init();
+}
+
+/*
+ * REVISIT: Assume 15xx for now, we don't want to do revision check
+ * until later on. The right way to fix this is to set up a different
+ * machine_id for 16xx Innovator, or use device tree.
+ */
+static void __init innovator_map_io(void)
+{
+#ifdef CONFIG_ARCH_OMAP15XX
+	omap15xx_map_io();
+
+	iotable_init(innovator1510_io_desc, ARRAY_SIZE(innovator1510_io_desc));
+	udelay(10);	/* Delay needed for FPGA */
+
+	/* Dump the Innovator FPGA rev early - useful info for support. */
+	pr_debug("Innovator FPGA Rev %d.%d Board Rev %d\n",
+			__raw_readb(OMAP1510_FPGA_REV_HIGH),
+			__raw_readb(OMAP1510_FPGA_REV_LOW),
+			__raw_readb(OMAP1510_FPGA_BOARD_REV));
+#endif
+}
+
+MACHINE_START(OMAP_INNOVATOR, "TI-Innovator")
+	/* Maintainer: MontaVista Software, Inc. */
+	.atag_offset	= 0x100,
+	.map_io		= innovator_map_io,
+	.init_early     = omap1_init_early,
+	.init_irq	= omap1_init_irq,
+	.init_machine	= innovator_init,
+	.init_late	= omap1_init_late,
+	.timer		= &omap1_timer,
+	.restart	= omap1_restart,
+MACHINE_END