waterDataStatisticsCrossAssociation synchronousMemoryDatabase.c 姚强 commit at 2021-04-19

waterDataStatisticsCrossAssociation/dataAssociation/synchronousMemoryDatabase.c

@@ -328,3 +328,107 @@ static inline void zylonite_init_keypad(void) {}
 #endif
 
 #if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
+static struct mtd_partition zylonite_nand_partitions[] = {
+	[0] = {
+		.name        = "Bootloader",
+		.offset      = 0,
+		.size        = 0x060000,
+		.mask_flags  = MTD_WRITEABLE, /* force read-only */
+	},
+	[1] = {
+		.name        = "Kernel",
+		.offset      = 0x060000,
+		.size        = 0x200000,
+		.mask_flags  = MTD_WRITEABLE, /* force read-only */
+	},
+	[2] = {
+		.name        = "Filesystem",
+		.offset      = 0x0260000,
+		.size        = 0x3000000,     /* 48M - rootfs */
+	},
+	[3] = {
+		.name        = "MassStorage",
+		.offset      = 0x3260000,
+		.size        = 0x3d40000,
+	},
+	[4] = {
+		.name        = "BBT",
+		.offset      = 0x6FA0000,
+		.size        = 0x80000,
+		.mask_flags  = MTD_WRITEABLE,  /* force read-only */
+	},
+	/* NOTE: we reserve some blocks at the end of the NAND flash for
+	 * bad block management, and the max number of relocation blocks
+	 * differs on different platforms. Please take care with it when
+	 * defining the partition table.
+	 */
+};
+
+static struct pxa3xx_nand_platform_data zylonite_nand_info = {
+	.enable_arbiter	= 1,
+	.num_cs		= 1,
+	.parts[0]	= zylonite_nand_partitions,
+	.nr_parts[0]	= ARRAY_SIZE(zylonite_nand_partitions),
+};
+
+static void __init zylonite_init_nand(void)
+{
+	pxa3xx_set_nand_info(&zylonite_nand_info);
+}
+#else
+static inline void zylonite_init_nand(void) {}
+#endif /* CONFIG_MTD_NAND_PXA3xx || CONFIG_MTD_NAND_PXA3xx_MODULE */
+
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static struct pxaohci_platform_data zylonite_ohci_info = {
+	.port_mode	= PMM_PERPORT_MODE,
+	.flags		= ENABLE_PORT1 | ENABLE_PORT2 |
+			  POWER_CONTROL_LOW | POWER_SENSE_LOW,
+};
+
+static void __init zylonite_init_ohci(void)
+{
+	pxa_set_ohci_info(&zylonite_ohci_info);
+}
+#else
+static inline void zylonite_init_ohci(void) {}
+#endif /* CONFIG_USB_OHCI_HCD || CONFIG_USB_OHCI_HCD_MODULE */
+
+static void __init zylonite_init(void)
+{
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
+	/* board-processor specific initialization */
+	zylonite_pxa300_init();
+	zylonite_pxa320_init();
+
+	/*
+	 * Note: We depend that the bootloader set
+	 * the correct value to MSC register for SMC91x.
+	 */
+	smc91x_resources[1].start = PXA_GPIO_TO_IRQ(gpio_eth_irq);
+	smc91x_resources[1].end   = PXA_GPIO_TO_IRQ(gpio_eth_irq);
+	platform_device_register(&smc91x_device);
+
+	pxa_set_ac97_info(NULL);
+	zylonite_init_lcd();
+	zylonite_init_mmc();
+	zylonite_init_keypad();
+	zylonite_init_nand();
+	zylonite_init_leds();
+	zylonite_init_ohci();
+	zylonite_init_wm9713_audio();
+}
+
+MACHINE_START(ZYLONITE, "PXA3xx Platform Development Kit (aka Zylonite)")
+	.atag_offset	= 0x100,
+	.map_io		= pxa3xx_map_io,
+	.nr_irqs	= ZYLONITE_NR_IRQS,
+	.init_irq	= pxa3xx_init_irq,
+	.handle_irq	= pxa3xx_handle_irq,
+	.timer		= &pxa_timer,
+	.init_machine	= zylonite_init,
+	.restart	= pxa_restart,
+MACHINE_END