efElectricAgingTrendMining cablePowerDataOperation.c 韩正义 commit at 2021-02-05

efElectricAgingTrendMining/databaseOperation/cablePowerDataOperation.c

@@ -508,3 +508,96 @@ static struct regulator_init_data sdp4430_vusim = {
 		.max_uV			= 2900000,
 		.apply_uV		= true,
 		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask	 = REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static struct twl6040_codec_data twl6040_codec = {
+	/* single-step ramp for headset and handsfree */
+	.hs_left_step	= 0x0f,
+	.hs_right_step	= 0x0f,
+	.hf_left_step	= 0x1d,
+	.hf_right_step	= 0x1d,
+};
+
+static struct twl6040_vibra_data twl6040_vibra = {
+	.vibldrv_res = 8,
+	.vibrdrv_res = 3,
+	.viblmotor_res = 10,
+	.vibrmotor_res = 10,
+	.vddvibl_uV = 0,	/* fixed volt supply - VBAT */
+	.vddvibr_uV = 0,	/* fixed volt supply - VBAT */
+};
+
+static struct twl6040_platform_data twl6040_data = {
+	.codec		= &twl6040_codec,
+	.vibra		= &twl6040_vibra,
+	.audpwron_gpio	= 127,
+};
+
+static struct i2c_board_info __initdata sdp4430_i2c_1_boardinfo[] = {
+	{
+		I2C_BOARD_INFO("twl6040", 0x4b),
+		.irq = 119 + OMAP44XX_IRQ_GIC_START,
+		.platform_data = &twl6040_data,
+	},
+};
+
+static struct twl4030_platform_data sdp4430_twldata = {
+	/* Regulators */
+	.vusim		= &sdp4430_vusim,
+	.vaux1		= &sdp4430_vaux1,
+};
+
+static struct i2c_board_info __initdata sdp4430_i2c_3_boardinfo[] = {
+	{
+		I2C_BOARD_INFO("tmp105", 0x48),
+	},
+	{
+		I2C_BOARD_INFO("bh1780", 0x29),
+	},
+};
+static struct i2c_board_info __initdata sdp4430_i2c_4_boardinfo[] = {
+	{
+		I2C_BOARD_INFO("hmc5843", 0x1e),
+	},
+};
+static int __init omap4_i2c_init(void)
+{
+	omap4_pmic_get_config(&sdp4430_twldata, TWL_COMMON_PDATA_USB,
+			TWL_COMMON_REGULATOR_VDAC |
+			TWL_COMMON_REGULATOR_VAUX2 |
+			TWL_COMMON_REGULATOR_VAUX3 |
+			TWL_COMMON_REGULATOR_VMMC |
+			TWL_COMMON_REGULATOR_VPP |
+			TWL_COMMON_REGULATOR_VANA |
+			TWL_COMMON_REGULATOR_VCXIO |
+			TWL_COMMON_REGULATOR_VUSB |
+			TWL_COMMON_REGULATOR_CLK32KG |
+			TWL_COMMON_REGULATOR_V1V8 |
+			TWL_COMMON_REGULATOR_V2V1);
+	omap4_pmic_init("twl6030", &sdp4430_twldata, sdp4430_i2c_1_boardinfo,
+			ARRAY_SIZE(sdp4430_i2c_1_boardinfo));
+	omap_register_i2c_bus(2, 400, NULL, 0);
+	omap_register_i2c_bus(3, 400, sdp4430_i2c_3_boardinfo,
+				ARRAY_SIZE(sdp4430_i2c_3_boardinfo));
+	omap_register_i2c_bus(4, 400, sdp4430_i2c_4_boardinfo,
+				ARRAY_SIZE(sdp4430_i2c_4_boardinfo));
+	return 0;
+}
+
+static void __init omap_sfh7741prox_init(void)
+{
+	int error;
+
+	error = gpio_request_one(OMAP4_SFH7741_ENABLE_GPIO,
+				 GPIOF_OUT_INIT_LOW, "sfh7741");
+	if (error < 0)
+		pr_err("%s:failed to request GPIO %d, error %d\n",
+			__func__, OMAP4_SFH7741_ENABLE_GPIO, error);
+}
+
+#ifdef CONFIG_OMAP_MUX