|
|
@@ -0,0 +1,164 @@
|
|
|
+/*
|
|
|
+ * linux/arch/arm/mach-omap1/board-osk.c
|
|
|
+ *
|
|
|
+ * Board specific init for OMAP5912 OSK
|
|
|
+ *
|
|
|
+ * Written by Dirk Behme <dirk.behme@de.bosch.com>
|
|
|
+ *
|
|
|
+ * This program is free software; you can redistribute it and/or modify it
|
|
|
+ * under the terms of the GNU General Public License as published by the
|
|
|
+ * Free Software Foundation; either version 2 of the License, or (at your
|
|
|
+ * option) any later version.
|
|
|
+ *
|
|
|
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
|
|
|
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
|
|
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
|
|
|
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
|
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
|
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
|
|
|
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
|
|
|
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
|
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
|
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
|
+ *
|
|
|
+ * You should have received a copy of the GNU General Public License along
|
|
|
+ * with this program; if not, write to the Free Software Foundation, Inc.,
|
|
|
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
|
+ */
|
|
|
+#include <linux/gpio.h>
|
|
|
+#include <linux/kernel.h>
|
|
|
+#include <linux/init.h>
|
|
|
+#include <linux/platform_device.h>
|
|
|
+#include <linux/interrupt.h>
|
|
|
+#include <linux/irq.h>
|
|
|
+#include <linux/i2c.h>
|
|
|
+#include <linux/leds.h>
|
|
|
+#include <linux/smc91x.h>
|
|
|
+#include <linux/omapfb.h>
|
|
|
+#include <linux/mtd/mtd.h>
|
|
|
+#include <linux/mtd/partitions.h>
|
|
|
+#include <linux/mtd/physmap.h>
|
|
|
+#include <linux/i2c/tps65010.h>
|
|
|
+#include <linux/platform_data/gpio-omap.h>
|
|
|
+#include <linux/platform_data/omap1_bl.h>
|
|
|
+
|
|
|
+#include <asm/mach-types.h>
|
|
|
+#include <asm/mach/arch.h>
|
|
|
+#include <asm/mach/map.h>
|
|
|
+
|
|
|
+#include <mach/flash.h>
|
|
|
+#include <mach/mux.h>
|
|
|
+#include <mach/tc.h>
|
|
|
+
|
|
|
+#include <mach/hardware.h>
|
|
|
+#include <mach/usb.h>
|
|
|
+
|
|
|
+#include "common.h"
|
|
|
+
|
|
|
+/* At OMAP5912 OSK the Ethernet is directly connected to CS1 */
|
|
|
+#define OMAP_OSK_ETHR_START 0x04800300
|
|
|
+
|
|
|
+/* TPS65010 has four GPIOs. nPG and LED2 can be treated like GPIOs with
|
|
|
+ * alternate pin configurations for hardware-controlled blinking.
|
|
|
+ */
|
|
|
+#define OSK_TPS_GPIO_BASE (OMAP_MAX_GPIO_LINES + 16 /* MPUIO */)
|
|
|
+# define OSK_TPS_GPIO_USB_PWR_EN (OSK_TPS_GPIO_BASE + 0)
|
|
|
+# define OSK_TPS_GPIO_LED_D3 (OSK_TPS_GPIO_BASE + 1)
|
|
|
+# define OSK_TPS_GPIO_LAN_RESET (OSK_TPS_GPIO_BASE + 2)
|
|
|
+# define OSK_TPS_GPIO_DSP_PWR_EN (OSK_TPS_GPIO_BASE + 3)
|
|
|
+# define OSK_TPS_GPIO_LED_D9 (OSK_TPS_GPIO_BASE + 4)
|
|
|
+# define OSK_TPS_GPIO_LED_D2 (OSK_TPS_GPIO_BASE + 5)
|
|
|
+
|
|
|
+static struct mtd_partition osk_partitions[] = {
|
|
|
+ /* bootloader (U-Boot, etc) in first sector */
|
|
|
+ {
|
|
|
+ .name = "bootloader",
|
|
|
+ .offset = 0,
|
|
|
+ .size = SZ_128K,
|
|
|
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
|
|
|
+ },
|
|
|
+ /* bootloader params in the next sector */
|
|
|
+ {
|
|
|
+ .name = "params",
|
|
|
+ .offset = MTDPART_OFS_APPEND,
|
|
|
+ .size = SZ_128K,
|
|
|
+ .mask_flags = 0,
|
|
|
+ }, {
|
|
|
+ .name = "kernel",
|
|
|
+ .offset = MTDPART_OFS_APPEND,
|
|
|
+ .size = SZ_2M,
|
|
|
+ .mask_flags = 0
|
|
|
+ }, {
|
|
|
+ .name = "filesystem",
|
|
|
+ .offset = MTDPART_OFS_APPEND,
|
|
|
+ .size = MTDPART_SIZ_FULL,
|
|
|
+ .mask_flags = 0
|
|
|
+ }
|
|
|
+};
|
|
|
+
|
|
|
+static struct physmap_flash_data osk_flash_data = {
|
|
|
+ .width = 2,
|
|
|
+ .set_vpp = omap1_set_vpp,
|
|
|
+ .parts = osk_partitions,
|
|
|
+ .nr_parts = ARRAY_SIZE(osk_partitions),
|
|
|
+};
|
|
|
+
|
|
|
+static struct resource osk_flash_resource = {
|
|
|
+ /* this is on CS3, wherever it's mapped */
|
|
|
+ .flags = IORESOURCE_MEM,
|
|
|
+};
|
|
|
+
|
|
|
+static struct platform_device osk5912_flash_device = {
|
|
|
+ .name = "physmap-flash",
|
|
|
+ .id = 0,
|
|
|
+ .dev = {
|
|
|
+ .platform_data = &osk_flash_data,
|
|
|
+ },
|
|
|
+ .num_resources = 1,
|
|
|
+ .resource = &osk_flash_resource,
|
|
|
+};
|
|
|
+
|
|
|
+static struct smc91x_platdata osk5912_smc91x_info = {
|
|
|
+ .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
|
|
|
+ .leda = RPC_LED_100_10,
|
|
|
+ .ledb = RPC_LED_TX_RX,
|
|
|
+};
|
|
|
+
|
|
|
+static struct resource osk5912_smc91x_resources[] = {
|
|
|
+ [0] = {
|
|
|
+ .start = OMAP_OSK_ETHR_START, /* Physical */
|
|
|
+ .end = OMAP_OSK_ETHR_START + 0xf,
|
|
|
+ .flags = IORESOURCE_MEM,
|
|
|
+ },
|
|
|
+ [1] = {
|
|
|
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
|
|
|
+ },
|
|
|
+};
|
|
|
+
|
|
|
+static struct platform_device osk5912_smc91x_device = {
|
|
|
+ .name = "smc91x",
|
|
|
+ .id = -1,
|
|
|
+ .dev = {
|
|
|
+ .platform_data = &osk5912_smc91x_info,
|
|
|
+ },
|
|
|
+ .num_resources = ARRAY_SIZE(osk5912_smc91x_resources),
|
|
|
+ .resource = osk5912_smc91x_resources,
|
|
|
+};
|
|
|
+
|
|
|
+static struct resource osk5912_cf_resources[] = {
|
|
|
+ [0] = {
|
|
|
+ .flags = IORESOURCE_IRQ,
|
|
|
+ },
|
|
|
+};
|
|
|
+
|
|
|
+static struct platform_device osk5912_cf_device = {
|
|
|
+ .name = "omap_cf",
|
|
|
+ .id = -1,
|
|
|
+ .dev = {
|
|
|
+ .platform_data = (void *) 2 /* CS2 */,
|
|
|
+ },
|
|
|
+ .num_resources = ARRAY_SIZE(osk5912_cf_resources),
|
|
|
+ .resource = osk5912_cf_resources,
|
|
|
+};
|
|
|
+
|
|
|
+static struct platform_device *osk5912_devices[] __initdata = {
|
