efDataPreprocessing memoryOperation.c 吉超博 commit at 2021-01-29

efDataPreprocessing/dataSharedMemory/memoryOperation.c

@@ -192,3 +192,162 @@ static struct irq_domain_ops vic_irqdomain_ops = {
  * @base: The base address of the VIC.
  * @irq: The base IRQ for the VIC.
  * @valid_sources: bitmask of valid interrupts
+ * @resume_sources: bitmask of interrupts allowed for resume sources.
+ * @node: The device tree node associated with the VIC.
+ *
+ * Register the VIC with the system device tree so that it can be notified
+ * of suspend and resume requests and ensure that the correct actions are
+ * taken to re-instate the settings on resume.
+ *
+ * This also configures the IRQ domain for the VIC.
+ */
+static void __init vic_register(void __iomem *base, unsigned int irq,
+				u32 valid_sources, u32 resume_sources,
+				struct device_node *node)
+{
+	struct vic_device *v;
+	int i;
+
+	if (vic_id >= ARRAY_SIZE(vic_devices)) {
+		printk(KERN_ERR "%s: too few VICs, increase CONFIG_ARM_VIC_NR\n", __func__);
+		return;
+	}
+
+	v = &vic_devices[vic_id];
+	v->base = base;
+	v->valid_sources = valid_sources;
+	v->resume_sources = resume_sources;
+	v->irq = irq;
+	vic_id++;
+	v->domain = irq_domain_add_simple(node, fls(valid_sources), irq,
+					  &vic_irqdomain_ops, v);
+	/* create an IRQ mapping for each valid IRQ */
+	for (i = 0; i < fls(valid_sources); i++)
+		if (valid_sources & (1 << i))
+			irq_create_mapping(v->domain, i);
+}
+
+static void vic_ack_irq(struct irq_data *d)
+{
+	void __iomem *base = irq_data_get_irq_chip_data(d);
+	unsigned int irq = d->hwirq;
+	writel(1 << irq, base + VIC_INT_ENABLE_CLEAR);
+	/* moreover, clear the soft-triggered, in case it was the reason */
+	writel(1 << irq, base + VIC_INT_SOFT_CLEAR);
+}
+
+static void vic_mask_irq(struct irq_data *d)
+{
+	void __iomem *base = irq_data_get_irq_chip_data(d);
+	unsigned int irq = d->hwirq;
+	writel(1 << irq, base + VIC_INT_ENABLE_CLEAR);
+}
+
+static void vic_unmask_irq(struct irq_data *d)
+{
+	void __iomem *base = irq_data_get_irq_chip_data(d);
+	unsigned int irq = d->hwirq;
+	writel(1 << irq, base + VIC_INT_ENABLE);
+}
+
+#if defined(CONFIG_PM)
+static struct vic_device *vic_from_irq(unsigned int irq)
+{
+        struct vic_device *v = vic_devices;
+	unsigned int base_irq = irq & ~31;
+	int id;
+
+	for (id = 0; id < vic_id; id++, v++) {
+		if (v->irq == base_irq)
+			return v;
+	}
+
+	return NULL;
+}
+
+static int vic_set_wake(struct irq_data *d, unsigned int on)
+{
+	struct vic_device *v = vic_from_irq(d->irq);
+	unsigned int off = d->hwirq;
+	u32 bit = 1 << off;
+
+	if (!v)
+		return -EINVAL;
+
+	if (!(bit & v->resume_sources))
+		return -EINVAL;
+
+	if (on)
+		v->resume_irqs |= bit;
+	else
+		v->resume_irqs &= ~bit;
+
+	return 0;
+}
+#else
+#define vic_set_wake NULL
+#endif /* CONFIG_PM */
+
+static struct irq_chip vic_chip = {
+	.name		= "VIC",
+	.irq_ack	= vic_ack_irq,
+	.irq_mask	= vic_mask_irq,
+	.irq_unmask	= vic_unmask_irq,
+	.irq_set_wake	= vic_set_wake,
+};
+
+static void __init vic_disable(void __iomem *base)
+{
+	writel(0, base + VIC_INT_SELECT);
+	writel(0, base + VIC_INT_ENABLE);
+	writel(~0, base + VIC_INT_ENABLE_CLEAR);
+	writel(0, base + VIC_ITCR);
+	writel(~0, base + VIC_INT_SOFT_CLEAR);
+}
+
+static void __init vic_clear_interrupts(void __iomem *base)
+{
+	unsigned int i;
+
+	writel(0, base + VIC_PL190_VECT_ADDR);
+	for (i = 0; i < 19; i++) {
+		unsigned int value;
+
+		value = readl(base + VIC_PL190_VECT_ADDR);
+		writel(value, base + VIC_PL190_VECT_ADDR);
+	}
+}
+
+/*
+ * The PL190 cell from ARM has been modified by ST to handle 64 interrupts.
+ * The original cell has 32 interrupts, while the modified one has 64,
+ * replocating two blocks 0x00..0x1f in 0x20..0x3f. In that case
+ * the probe function is called twice, with base set to offset 000
+ *  and 020 within the page. We call this "second block".
+ */
+static void __init vic_init_st(void __iomem *base, unsigned int irq_start,
+			       u32 vic_sources, struct device_node *node)
+{
+	unsigned int i;
+	int vic_2nd_block = ((unsigned long)base & ~PAGE_MASK) != 0;
+
+	/* Disable all interrupts initially. */
+	vic_disable(base);
+
+	/*
+	 * Make sure we clear all existing interrupts. The vector registers
+	 * in this cell are after the second block of general registers,
+	 * so we can address them using standard offsets, but only from
+	 * the second base address, which is 0x20 in the page
+	 */
+	if (vic_2nd_block) {
+		vic_clear_interrupts(base);
+
+		/* ST has 16 vectors as well, but we don't enable them by now */
+		for (i = 0; i < 16; i++) {
+			void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4);
+			writel(0, reg);
+		}
+
+		writel(32, base + VIC_PL190_DEF_VECT_ADDR);
+	}