efHeterogeneousSynchronization alarmMemoryDefinition.c 姚强 commit at 2021-03-31

efHeterogeneousSynchronization/dataSharedMemory/alarmMemoryDefinition.c

@@ -370,3 +370,146 @@ ioc_error(__u32 stat0, __u32 stat1)
 		"target abort", "bad address parity", "page table read error",
 		"invalid page", "data error"
 	};
+	unsigned code = (stat0 & IOC_CODE) >> IOC_CODE_SHIFT;
+	unsigned cmd  = (stat0 & IOC_CMD)  >> IOC_CMD_SHIFT;
+
+	printk("    %s initiated PCI %s cycle to address %x"
+	       " failed due to %s.\n",
+	       code > 3 ? "PCI" : "CPU", pci_cmd[cmd], stat1, err_name[code]);
+
+	if (code == 5 || code == 6) {
+		printk("    (Error occurred at PCI memory address %x.)\n",
+		       (stat0 & ~IOC_P_NBR));
+	}
+	if (stat0 & IOC_LOST) {
+		printk("    Other PCI errors occurred simultaneously.\n");
+	}
+}
+
+void
+lca_machine_check(unsigned long vector, unsigned long la_ptr)
+{
+	const char * reason;
+	union el_lca el;
+
+	el.c = (struct el_common *) la_ptr;
+
+	wrmces(rdmces());	/* reset machine check pending flag */
+
+	printk(KERN_CRIT "LCA machine check: vector=%#lx pc=%#lx code=%#x\n",
+	       vector, get_irq_regs()->pc, (unsigned int) el.c->code);
+
+	/*
+	 * The first quadword after the common header always seems to
+	 * be the machine check reason---don't know why this isn't
+	 * part of the common header instead.  In the case of a long
+	 * logout frame, the upper 32 bits is the machine check
+	 * revision level, which we ignore for now.
+	 */
+	switch ((unsigned int) el.c->code) {
+	case MCHK_K_TPERR:	reason = "tag parity error"; break;
+	case MCHK_K_TCPERR:	reason = "tag control parity error"; break;
+	case MCHK_K_HERR:	reason = "access to non-existent memory"; break;
+	case MCHK_K_ECC_C:	reason = "correctable ECC error"; break;
+	case MCHK_K_ECC_NC:	reason = "non-correctable ECC error"; break;
+	case MCHK_K_CACKSOFT:	reason = "MCHK_K_CACKSOFT"; break;
+	case MCHK_K_BUGCHECK:	reason = "illegal exception in PAL mode"; break;
+	case MCHK_K_OS_BUGCHECK: reason = "callsys in kernel mode"; break;
+	case MCHK_K_DCPERR:	reason = "d-cache parity error"; break;
+	case MCHK_K_ICPERR:	reason = "i-cache parity error"; break;
+	case MCHK_K_SIO_SERR:	reason = "SIO SERR occurred on PCI bus"; break;
+	case MCHK_K_SIO_IOCHK:	reason = "SIO IOCHK occurred on ISA bus"; break;
+	case MCHK_K_DCSR:	reason = "MCHK_K_DCSR"; break;
+	case MCHK_K_UNKNOWN:
+	default:		reason = "unknown"; break;
+	}
+
+	switch (el.c->size) {
+	case sizeof(struct el_lca_mcheck_short):
+		printk(KERN_CRIT
+		       "  Reason: %s (short frame%s, dc_stat=%#lx):\n",
+		       reason, el.c->retry ? ", retryable" : "",
+		       el.s->dc_stat);
+		if (el.s->esr & ESR_EAV) {
+			mem_error(el.s->esr, el.s->ear);
+		}
+		if (el.s->ioc_stat0 & IOC_ERR) {
+			ioc_error(el.s->ioc_stat0, el.s->ioc_stat1);
+		}
+		break;
+
+	case sizeof(struct el_lca_mcheck_long):
+		printk(KERN_CRIT "  Reason: %s (long frame%s):\n",
+		       reason, el.c->retry ? ", retryable" : "");
+		printk(KERN_CRIT
+		       "    reason: %#lx  exc_addr: %#lx  dc_stat: %#lx\n", 
+		       el.l->pt[0], el.l->exc_addr, el.l->dc_stat);
+		printk(KERN_CRIT "    car: %#lx\n", el.l->car);
+		if (el.l->esr & ESR_EAV) {
+			mem_error(el.l->esr, el.l->ear);
+		}
+		if (el.l->ioc_stat0 & IOC_ERR) {
+			ioc_error(el.l->ioc_stat0, el.l->ioc_stat1);
+		}
+		break;
+
+	default:
+		printk(KERN_CRIT "  Unknown errorlog size %d\n", el.c->size);
+	}
+
+	/* Dump the logout area to give all info.  */
+#ifdef CONFIG_VERBOSE_MCHECK
+	if (alpha_verbose_mcheck > 1) {
+		unsigned long * ptr = (unsigned long *) la_ptr;
+		long i;
+		for (i = 0; i < el.c->size / sizeof(long); i += 2) {
+			printk(KERN_CRIT " +%8lx %016lx %016lx\n",
+			       i*sizeof(long), ptr[i], ptr[i+1]);
+		}
+	}
+#endif /* CONFIG_VERBOSE_MCHECK */
+}
+
+/*
+ * The following routines are needed to support the SPEED changing
+ * necessary to successfully manage the thermal problem on the AlphaBook1.
+ */
+
+void
+lca_clock_print(void)
+{
+        long    pmr_reg;
+
+        pmr_reg = LCA_READ_PMR;
+
+        printk("Status of clock control:\n");
+        printk("\tPrimary clock divisor\t0x%lx\n", LCA_GET_PRIMARY(pmr_reg));
+        printk("\tOverride clock divisor\t0x%lx\n", LCA_GET_OVERRIDE(pmr_reg));
+        printk("\tInterrupt override is %s\n",
+	       (pmr_reg & LCA_PMR_INTO) ? "on" : "off"); 
+        printk("\tDMA override is %s\n",
+	       (pmr_reg & LCA_PMR_DMAO) ? "on" : "off"); 
+
+}
+
+int
+lca_get_clock(void)
+{
+        long    pmr_reg;
+
+        pmr_reg = LCA_READ_PMR;
+        return(LCA_GET_PRIMARY(pmr_reg));
+
+}
+
+void
+lca_clock_fiddle(int divisor)
+{
+        long    pmr_reg;
+
+        pmr_reg = LCA_READ_PMR;
+        LCA_SET_PRIMARY_CLOCK(pmr_reg, divisor);
+	/* lca_norm_clock = divisor; */
+        LCA_WRITE_PMR(pmr_reg);
+        mb();
+}