efElectricAgingTrendMining influenceAnalysisOfCableAging.c 李欣儒 commit at 2020-10-23

efElectricAgingTrendMining/analysisOfEnvironmentalFactors/influenceAnalysisOfCableAging.c

@@ -174,3 +174,197 @@ static struct omap_dss_board_info devkit8000_dss_data = {
 
 static uint32_t board_keymap[] = {
 	KEY(0, 0, KEY_1),
+	KEY(1, 0, KEY_2),
+	KEY(2, 0, KEY_3),
+	KEY(0, 1, KEY_4),
+	KEY(1, 1, KEY_5),
+	KEY(2, 1, KEY_6),
+	KEY(3, 1, KEY_F5),
+	KEY(0, 2, KEY_7),
+	KEY(1, 2, KEY_8),
+	KEY(2, 2, KEY_9),
+	KEY(3, 2, KEY_F6),
+	KEY(0, 3, KEY_F7),
+	KEY(1, 3, KEY_0),
+	KEY(2, 3, KEY_F8),
+	PERSISTENT_KEY(4, 5),
+	KEY(4, 4, KEY_VOLUMEUP),
+	KEY(5, 5, KEY_VOLUMEDOWN),
+	0
+};
+
+static struct matrix_keymap_data board_map_data = {
+	.keymap			= board_keymap,
+	.keymap_size		= ARRAY_SIZE(board_keymap),
+};
+
+static struct twl4030_keypad_data devkit8000_kp_data = {
+	.keymap_data	= &board_map_data,
+	.rows		= 6,
+	.cols		= 6,
+	.rep		= 1,
+};
+
+static struct gpio_led gpio_leds[];
+
+static int devkit8000_twl_gpio_setup(struct device *dev,
+		unsigned gpio, unsigned ngpio)
+{
+	int ret;
+
+	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
+	mmc[0].gpio_cd = gpio + 0;
+	omap_hsmmc_late_init(mmc);
+
+	/* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
+	gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
+
+	/* TWL4030_GPIO_MAX + 0 is "LCD_PWREN" (out, active high) */
+	devkit8000_lcd_device.reset_gpio = gpio + TWL4030_GPIO_MAX + 0;
+	ret = gpio_request_one(devkit8000_lcd_device.reset_gpio,
+			       GPIOF_OUT_INIT_LOW, "LCD_PWREN");
+	if (ret < 0) {
+		devkit8000_lcd_device.reset_gpio = -EINVAL;
+		printk(KERN_ERR "Failed to request GPIO for LCD_PWRN\n");
+	}
+
+	/* gpio + 7 is "DVI_PD" (out, active low) */
+	dvi_panel.power_down_gpio = gpio + 7;
+
+	return 0;
+}
+
+static struct twl4030_gpio_platform_data devkit8000_gpio_data = {
+	.use_leds	= true,
+	.pulldowns	= BIT(1) | BIT(2) | BIT(6) | BIT(8) | BIT(13)
+				| BIT(15) | BIT(16) | BIT(17),
+	.setup		= devkit8000_twl_gpio_setup,
+};
+
+static struct regulator_consumer_supply devkit8000_vpll1_supplies[] = {
+	REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
+	REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi.0"),
+};
+
+/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
+static struct regulator_init_data devkit8000_vmmc1 = {
+	.constraints = {
+		.min_uV			= 1850000,
+		.max_uV			= 3150000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(devkit8000_vmmc1_supply),
+	.consumer_supplies	= devkit8000_vmmc1_supply,
+};
+
+/* VPLL1 for digital video outputs */
+static struct regulator_init_data devkit8000_vpll1 = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 1800000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(devkit8000_vpll1_supplies),
+	.consumer_supplies	= devkit8000_vpll1_supplies,
+};
+
+/* VAUX4 for ads7846 and nubs */
+static struct regulator_init_data devkit8000_vio = {
+	.constraints = {
+		.min_uV                 = 1800000,
+		.max_uV                 = 1800000,
+		.apply_uV               = true,
+		.valid_modes_mask       = REGULATOR_MODE_NORMAL
+			| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask         = REGULATOR_CHANGE_MODE
+			| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies  = ARRAY_SIZE(devkit8000_vio_supply),
+	.consumer_supplies      = devkit8000_vio_supply,
+};
+
+static struct twl4030_platform_data devkit8000_twldata = {
+	/* platform_data for children goes here */
+	.gpio		= &devkit8000_gpio_data,
+	.vmmc1		= &devkit8000_vmmc1,
+	.vpll1		= &devkit8000_vpll1,
+	.vio		= &devkit8000_vio,
+	.keypad		= &devkit8000_kp_data,
+};
+
+static int __init devkit8000_i2c_init(void)
+{
+	omap3_pmic_get_config(&devkit8000_twldata,
+			  TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO,
+			  TWL_COMMON_REGULATOR_VDAC);
+	omap3_pmic_init("tps65930", &devkit8000_twldata);
+	/* Bus 3 is attached to the DVI port where devices like the pico DLP
+	 * projector don't work reliably with 400kHz */
+	omap_register_i2c_bus(3, 400, NULL, 0);
+	return 0;
+}
+
+static struct gpio_led gpio_leds[] = {
+	{
+		.name			= "led1",
+		.default_trigger	= "heartbeat",
+		.gpio			= 186,
+		.active_low		= true,
+	},
+	{
+		.name			= "led2",
+		.default_trigger	= "mmc0",
+		.gpio			= 163,
+		.active_low		= true,
+	},
+	{
+		.name			= "ledB",
+		.default_trigger	= "none",
+		.gpio			= 153,
+		.active_low             = true,
+	},
+	{
+		.name			= "led3",
+		.default_trigger	= "none",
+		.gpio			= 164,
+		.active_low             = true,
+	},
+};
+
+static struct gpio_led_platform_data gpio_led_info = {
+	.leds		= gpio_leds,
+	.num_leds	= ARRAY_SIZE(gpio_leds),
+};
+
+static struct platform_device leds_gpio = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &gpio_led_info,
+	},
+};
+
+static struct gpio_keys_button gpio_buttons[] = {
+	{
+		.code			= BTN_EXTRA,
+		.gpio			= 26,
+		.desc			= "user",
+		.wakeup			= 1,
+	},
+};
+
+static struct gpio_keys_platform_data gpio_key_info = {
+	.buttons	= gpio_buttons,
+	.nbuttons	= ARRAY_SIZE(gpio_buttons),
+};
+
+static struct platform_device keys_gpio = {
+	.name	= "gpio-keys",
+	.id	= -1,