waterDataFluctuationCorrelation hiddenDangerAnalysis.c 李欣儒 commit at 2021-02-19

waterDataFluctuationCorrelation/fluctuationCorrelationOfFireHydrant/hiddenDangerAnalysis.c

@@ -645,3 +645,81 @@ static struct vpbe_enc_mode_info dm644xevm_enc_std_timing[] = {
 	},
 };
 
+/* venc dv preset timings */
+static struct vpbe_enc_mode_info dm644xevm_enc_preset_timing[] = {
+	{
+		.name		= "480p59_94",
+		.timings_type	= VPBE_ENC_CUSTOM_TIMINGS,
+		.dv_timings	= V4L2_DV_BT_CEA_720X480P59_94,
+		.interlaced	= 0,
+		.xres		= 720,
+		.yres		= 480,
+		.aspect		= {1, 1},
+		.fps		= {5994, 100},
+		.left_margin	= 0x80,
+		.upper_margin	= 0x20,
+	},
+	{
+		.name		= "576p50",
+		.timings_type	= VPBE_ENC_CUSTOM_TIMINGS,
+		.dv_timings	= V4L2_DV_BT_CEA_720X576P50,
+		.interlaced	= 0,
+		.xres		= 720,
+		.yres		= 576,
+		.aspect		= {1, 1},
+		.fps		= {50, 1},
+		.left_margin	= 0x7e,
+		.upper_margin	= 0x30,
+	},
+};
+
+/*
+ * The outputs available from VPBE + encoders. Keep the order same
+ * as that of encoders. First those from venc followed by that from
+ * encoders. Index in the output refers to index on a particular encoder.
+ * Driver uses this index to pass it to encoder when it supports more
+ * than one output. Userspace applications use index of the array to
+ * set an output.
+ */
+static struct vpbe_output dm644xevm_vpbe_outputs[] = {
+	{
+		.output		= {
+			.index		= 0,
+			.name		= "Composite",
+			.type		= V4L2_OUTPUT_TYPE_ANALOG,
+			.std		= VENC_STD_ALL,
+			.capabilities	= V4L2_OUT_CAP_STD,
+		},
+		.subdev_name	= VPBE_VENC_SUBDEV_NAME,
+		.default_mode	= "ntsc",
+		.num_modes	= ARRAY_SIZE(dm644xevm_enc_std_timing),
+		.modes		= dm644xevm_enc_std_timing,
+	},
+	{
+		.output		= {
+			.index		= 1,
+			.name		= "Component",
+			.type		= V4L2_OUTPUT_TYPE_ANALOG,
+			.capabilities	= V4L2_OUT_CAP_DV_TIMINGS,
+		},
+		.subdev_name	= VPBE_VENC_SUBDEV_NAME,
+		.default_mode	= "480p59_94",
+		.num_modes	= ARRAY_SIZE(dm644xevm_enc_preset_timing),
+		.modes		= dm644xevm_enc_preset_timing,
+	},
+};
+
+static struct vpbe_config dm644xevm_display_cfg = {
+	.module_name	= "dm644x-vpbe-display",
+	.i2c_adapter_id	= 1,
+	.osd		= {
+		.module_name	= VPBE_OSD_SUBDEV_NAME,
+	},
+	.venc		= {
+		.module_name	= VPBE_VENC_SUBDEV_NAME,
+	},
+	.num_outputs	= ARRAY_SIZE(dm644xevm_vpbe_outputs),
+	.outputs	= dm644xevm_vpbe_outputs,
+};
+
+static struct platform_device *davinci_evm_devices[] __initdata = {