waterDataPreprocessing waterPressureDataPreprocessingThread.c 韩正义 commit at 2020-12-31

waterDataPreprocessing/dataProcessing/waterPressureDataPreprocessingThread.c

@@ -322,3 +322,154 @@ static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c,
 	else
 		mmc->reg_offset = 0;
 
+	mmc->get_context_loss_count = hsmmc_get_context_loss;
+
+	mmc->slots[0].switch_pin = c->gpio_cd;
+	mmc->slots[0].gpio_wp = c->gpio_wp;
+
+	mmc->slots[0].remux = c->remux;
+	mmc->slots[0].init_card = c->init_card;
+
+	if (c->cover_only)
+		mmc->slots[0].cover = 1;
+
+	if (c->nonremovable)
+		mmc->slots[0].nonremovable = 1;
+
+	if (c->power_saving)
+		mmc->slots[0].power_saving = 1;
+
+	if (c->no_off)
+		mmc->slots[0].no_off = 1;
+
+	if (c->no_off_init)
+		mmc->slots[0].no_regulator_off_init = c->no_off_init;
+
+	if (c->vcc_aux_disable_is_sleep)
+		mmc->slots[0].vcc_aux_disable_is_sleep = 1;
+
+	/*
+	 * NOTE:  MMC slots should have a Vcc regulator set up.
+	 * This may be from a TWL4030-family chip, another
+	 * controllable regulator, or a fixed supply.
+	 *
+	 * temporary HACK: ocr_mask instead of fixed supply
+	 */
+	if (soc_is_am35xx())
+		mmc->slots[0].ocr_mask = MMC_VDD_165_195 |
+					 MMC_VDD_26_27 |
+					 MMC_VDD_27_28 |
+					 MMC_VDD_29_30 |
+					 MMC_VDD_30_31 |
+					 MMC_VDD_31_32;
+	else
+		mmc->slots[0].ocr_mask = c->ocr_mask;
+
+	if (!soc_is_am35xx())
+		mmc->slots[0].features |= HSMMC_HAS_PBIAS;
+
+	if (cpu_is_omap44xx() && (omap_rev() > OMAP4430_REV_ES1_0))
+		mmc->slots[0].features |= HSMMC_HAS_UPDATED_RESET;
+
+	switch (c->mmc) {
+	case 1:
+		if (mmc->slots[0].features & HSMMC_HAS_PBIAS) {
+			/* on-chip level shifting via PBIAS0/PBIAS1 */
+			if (cpu_is_omap44xx()) {
+				mmc->slots[0].before_set_reg =
+						omap4_hsmmc1_before_set_reg;
+				mmc->slots[0].after_set_reg =
+						omap4_hsmmc1_after_set_reg;
+			} else {
+				mmc->slots[0].before_set_reg =
+						omap_hsmmc1_before_set_reg;
+				mmc->slots[0].after_set_reg =
+						omap_hsmmc1_after_set_reg;
+			}
+		}
+
+		if (soc_is_am35xx())
+			mmc->slots[0].set_power = nop_mmc_set_power;
+
+		/* OMAP3630 HSMMC1 supports only 4-bit */
+		if (cpu_is_omap3630() &&
+				(c->caps & MMC_CAP_8_BIT_DATA)) {
+			c->caps &= ~MMC_CAP_8_BIT_DATA;
+			c->caps |= MMC_CAP_4_BIT_DATA;
+			mmc->slots[0].caps = c->caps;
+		}
+		break;
+	case 2:
+		if (soc_is_am35xx())
+			mmc->slots[0].set_power = am35x_hsmmc2_set_power;
+
+		if (c->ext_clock)
+			c->transceiver = 1;
+		if (c->transceiver && (c->caps & MMC_CAP_8_BIT_DATA)) {
+			c->caps &= ~MMC_CAP_8_BIT_DATA;
+			c->caps |= MMC_CAP_4_BIT_DATA;
+		}
+		if (mmc->slots[0].features & HSMMC_HAS_PBIAS) {
+			/* off-chip level shifting, or none */
+			mmc->slots[0].before_set_reg = hsmmc2_before_set_reg;
+			mmc->slots[0].after_set_reg = NULL;
+		}
+		break;
+	case 3:
+	case 4:
+	case 5:
+		mmc->slots[0].before_set_reg = NULL;
+		mmc->slots[0].after_set_reg = NULL;
+		break;
+	default:
+		pr_err("MMC%d configuration not supported!\n", c->mmc);
+		kfree(hc_name);
+		return -ENODEV;
+	}
+	return 0;
+}
+
+static int omap_hsmmc_done;
+
+void omap_hsmmc_late_init(struct omap2_hsmmc_info *c)
+{
+	struct platform_device *pdev;
+	struct omap_mmc_platform_data *mmc_pdata;
+	int res;
+
+	if (omap_hsmmc_done != 1)
+		return;
+
+	omap_hsmmc_done++;
+
+	for (; c->mmc; c++) {
+		if (!c->deferred)
+			continue;
+
+		pdev = c->pdev;
+		if (!pdev)
+			continue;
+
+		mmc_pdata = pdev->dev.platform_data;
+		if (!mmc_pdata)
+			continue;
+
+		mmc_pdata->slots[0].switch_pin = c->gpio_cd;
+		mmc_pdata->slots[0].gpio_wp = c->gpio_wp;
+
+		res = omap_device_register(pdev);
+		if (res)
+			pr_err("Could not late init MMC %s\n",
+			       c->name);
+	}
+}
+
+#define MAX_OMAP_MMC_HWMOD_NAME_LEN		16
+
+static void __init omap_hsmmc_init_one(struct omap2_hsmmc_info *hsmmcinfo,
+					int ctrl_nr)
+{
+	struct omap_hwmod *oh;
+	struct omap_hwmod *ohs[1];
+	struct omap_device *od;
+	struct platform_device *pdev;