Ver Fonte

waterDataStatistics functionDefinition.c 李欣儒 commit at 2020-12-18

李欣儒 há 4 anos atrás
pai
commit
49e532d663
1 ficheiros alterados com 127 adições e 0 exclusões
  1. 127 0
      waterDataStatistics/alarmDataCalculation/functionDefinition.c

+ 127 - 0
waterDataStatistics/alarmDataCalculation/functionDefinition.c

@@ -1858,3 +1858,130 @@ static struct omap_hwmod omap3xxx_pre_es3_mmc2_hwmod = {
 
 static struct omap_hwmod omap3xxx_es3plus_mmc2_hwmod = {
 	.name		= "mmc2",
+	.mpu_irqs	= omap34xx_mmc2_mpu_irqs,
+	.sdma_reqs	= omap34xx_mmc2_sdma_reqs,
+	.opt_clks	= omap34xx_mmc2_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(omap34xx_mmc2_opt_clks),
+	.main_clk	= "mmchs2_fck",
+	.prcm		= {
+		.omap2 = {
+			.module_offs = CORE_MOD,
+			.prcm_reg_id = 1,
+			.module_bit = OMAP3430_EN_MMC2_SHIFT,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP3430_ST_MMC2_SHIFT,
+		},
+	},
+	.class		= &omap34xx_mmc_class,
+};
+
+/* MMC/SD/SDIO3 */
+
+static struct omap_hwmod_irq_info omap34xx_mmc3_mpu_irqs[] = {
+	{ .irq = 94 + OMAP_INTC_START, },
+	{ .irq = -1 },
+};
+
+static struct omap_hwmod_dma_info omap34xx_mmc3_sdma_reqs[] = {
+	{ .name = "tx",	.dma_req = 77, },
+	{ .name = "rx",	.dma_req = 78, },
+	{ .dma_req = -1 }
+};
+
+static struct omap_hwmod_opt_clk omap34xx_mmc3_opt_clks[] = {
+	{ .role = "dbck", .clk = "omap_32k_fck", },
+};
+
+static struct omap_hwmod omap3xxx_mmc3_hwmod = {
+	.name		= "mmc3",
+	.mpu_irqs	= omap34xx_mmc3_mpu_irqs,
+	.sdma_reqs	= omap34xx_mmc3_sdma_reqs,
+	.opt_clks	= omap34xx_mmc3_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(omap34xx_mmc3_opt_clks),
+	.main_clk	= "mmchs3_fck",
+	.prcm		= {
+		.omap2 = {
+			.prcm_reg_id = 1,
+			.module_bit = OMAP3430_EN_MMC3_SHIFT,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP3430_ST_MMC3_SHIFT,
+		},
+	},
+	.class		= &omap34xx_mmc_class,
+};
+
+/*
+ * 'usb_host_hs' class
+ * high-speed multi-port usb host controller
+ */
+
+static struct omap_hwmod_class_sysconfig omap3xxx_usb_host_hs_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= (SYSC_HAS_MIDLEMODE | SYSC_HAS_CLOCKACTIVITY |
+			   SYSC_HAS_SIDLEMODE | SYSC_HAS_ENAWAKEUP |
+			   SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			   MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap3xxx_usb_host_hs_hwmod_class = {
+	.name = "usb_host_hs",
+	.sysc = &omap3xxx_usb_host_hs_sysc,
+};
+
+static struct omap_hwmod_opt_clk omap3xxx_usb_host_hs_opt_clks[] = {
+	  { .role = "ehci_logic_fck", .clk = "usbhost_120m_fck", },
+};
+
+static struct omap_hwmod_irq_info omap3xxx_usb_host_hs_irqs[] = {
+	{ .name = "ohci-irq", .irq = 76 + OMAP_INTC_START, },
+	{ .name = "ehci-irq", .irq = 77 + OMAP_INTC_START, },
+	{ .irq = -1 },
+};
+
+static struct omap_hwmod omap3xxx_usb_host_hs_hwmod = {
+	.name		= "usb_host_hs",
+	.class		= &omap3xxx_usb_host_hs_hwmod_class,
+	.clkdm_name	= "l3_init_clkdm",
+	.mpu_irqs	= omap3xxx_usb_host_hs_irqs,
+	.main_clk	= "usbhost_48m_fck",
+	.prcm = {
+		.omap2 = {
+			.module_offs = OMAP3430ES2_USBHOST_MOD,
+			.prcm_reg_id = 1,
+			.module_bit = OMAP3430ES2_EN_USBHOST1_SHIFT,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP3430ES2_ST_USBHOST_IDLE_SHIFT,
+			.idlest_stdby_bit = OMAP3430ES2_ST_USBHOST_STDBY_SHIFT,
+		},
+	},
+	.opt_clks	= omap3xxx_usb_host_hs_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(omap3xxx_usb_host_hs_opt_clks),
+
+	/*
+	 * Errata: USBHOST Configured In Smart-Idle Can Lead To a Deadlock
+	 * id: i660
+	 *
+	 * Description:
+	 * In the following configuration :
+	 * - USBHOST module is set to smart-idle mode
+	 * - PRCM asserts idle_req to the USBHOST module ( This typically
+	 *   happens when the system is going to a low power mode : all ports
+	 *   have been suspended, the master part of the USBHOST module has
+	 *   entered the standby state, and SW has cut the functional clocks)
+	 * - an USBHOST interrupt occurs before the module is able to answer
+	 *   idle_ack, typically a remote wakeup IRQ.
+	 * Then the USB HOST module will enter a deadlock situation where it
+	 * is no more accessible nor functional.
+	 *
+	 * Workaround:
+	 * Don't use smart idle; use only force idle, hence HWMOD_SWSUP_SIDLE
+	 */
+
+	/*
+	 * Errata: USB host EHCI may stall when entering smart-standby mode
+	 * Id: i571
+	 *