waterDataFluctuationCorrelation definitionOfSprayWaveMemory.c 康雷 commit at 2020-10-27

waterDataFluctuationCorrelation/dataSharedMemory/definitionOfSprayWaveMemory.c

@@ -306,3 +306,202 @@ static void __init gsia18s_pcf_leds_init(void)
 {
 	platform_device_register(&pcf_leds1);
 	platform_device_register(&pcf_leds2);
+	platform_device_register(&pcf_leds3);
+}
+
+/*
+ * SPI busses.
+ */
+static struct spi_board_info gsia18s_spi_devices[] = {
+	{ /* User accessible spi0, cs0 used for communication with MSP RTC */
+		.modalias	= "spidev",
+		.bus_num	= 0,
+		.chip_select	= 0,
+		.max_speed_hz	= 580000,
+		.mode		= SPI_MODE_1,
+	},
+	{ /* User accessible spi1, cs0 used for communication with int. DSP */
+		.modalias	= "spidev",
+		.bus_num	= 1,
+		.chip_select	= 0,
+		.max_speed_hz	= 5600000,
+		.mode		= SPI_MODE_0,
+	},
+	{ /* User accessible spi1, cs1 used for communication with ext. DSP */
+		.modalias	= "spidev",
+		.bus_num	= 1,
+		.chip_select	= 1,
+		.max_speed_hz	= 5600000,
+		.mode		= SPI_MODE_0,
+	},
+	{ /* User accessible spi1, cs2 used for communication with ext. DSP */
+		.modalias	= "spidev",
+		.bus_num	= 1,
+		.chip_select	= 2,
+		.max_speed_hz	= 5600000,
+		.mode		= SPI_MODE_0,
+	},
+	{ /* User accessible spi1, cs3 used for communication with ext. DSP */
+		.modalias	= "spidev",
+		.bus_num	= 1,
+		.chip_select	= 3,
+		.max_speed_hz	= 5600000,
+		.mode		= SPI_MODE_0,
+	}
+};
+
+/*
+ * GPI Buttons
+ */
+static struct gpio_keys_button buttons[] = {
+	{
+		.gpio		= GPIO_TRIG_NET_IN,
+		.code		= BTN_1,
+		.desc		= "TRIG_NET_IN",
+		.type		= EV_KEY,
+		.active_low	= 0,
+		.wakeup		= 1,
+	},
+	{ /* SW80 on the GS_IA18_S-MN board*/
+		.gpio		= GPIO_CARD_UNMOUNT_0,
+		.code		= BTN_2,
+		.desc		= "Card umount 0",
+		.type		= EV_KEY,
+		.active_low	= 1,
+		.wakeup		= 1,
+	},
+	{ /* SW79 on the GS_IA18_S-MN board*/
+		.gpio		= GPIO_CARD_UNMOUNT_1,
+		.code		= BTN_3,
+		.desc		= "Card umount 1",
+		.type		= EV_KEY,
+		.active_low	= 1,
+		.wakeup		= 1,
+	},
+	{ /* SW280 on the GS_IA18-CB board*/
+		.gpio		= GPIO_KEY_POWER,
+		.code		= KEY_POWER,
+		.desc		= "Power Off Button",
+		.type		= EV_KEY,
+		.active_low	= 0,
+		.wakeup		= 1,
+	}
+};
+
+static struct gpio_keys_platform_data button_data = {
+	.buttons	= buttons,
+	.nbuttons	= ARRAY_SIZE(buttons),
+};
+
+static struct platform_device button_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &button_data,
+	}
+};
+
+static void __init gsia18s_add_device_buttons(void)
+{
+	at91_set_gpio_input(GPIO_TRIG_NET_IN, 1);
+	at91_set_deglitch(GPIO_TRIG_NET_IN, 1);
+	at91_set_gpio_input(GPIO_CARD_UNMOUNT_0, 1);
+	at91_set_deglitch(GPIO_CARD_UNMOUNT_0, 1);
+	at91_set_gpio_input(GPIO_CARD_UNMOUNT_1, 1);
+	at91_set_deglitch(GPIO_CARD_UNMOUNT_1, 1);
+	at91_set_gpio_input(GPIO_KEY_POWER, 0);
+	at91_set_deglitch(GPIO_KEY_POWER, 1);
+
+	platform_device_register(&button_device);
+}
+
+/*
+ * I2C
+ */
+static int pcf8574x_0x20_setup(struct i2c_client *client, int gpio,
+				unsigned int ngpio, void *context)
+{
+	int status;
+
+	status = gpio_request(gpio + PCF_GPIO_ETH_DETECT, "eth_det");
+	if (status < 0) {
+		pr_err("error: can't request GPIO%d\n",
+			gpio + PCF_GPIO_ETH_DETECT);
+		return status;
+	}
+	status = gpio_direction_input(gpio + PCF_GPIO_ETH_DETECT);
+	if (status < 0) {
+		pr_err("error: can't setup GPIO%d as input\n",
+			gpio + PCF_GPIO_ETH_DETECT);
+		return status;
+	}
+	status = gpio_export(gpio + PCF_GPIO_ETH_DETECT, false);
+	if (status < 0) {
+		pr_err("error: can't export GPIO%d\n",
+			gpio + PCF_GPIO_ETH_DETECT);
+		return status;
+	}
+	status = gpio_sysfs_set_active_low(gpio + PCF_GPIO_ETH_DETECT, 1);
+	if (status < 0) {
+		pr_err("error: gpio_sysfs_set active_low(GPIO%d, 1)\n",
+			gpio + PCF_GPIO_ETH_DETECT);
+		return status;
+	}
+
+	return 0;
+}
+
+static int pcf8574x_0x20_teardown(struct i2c_client *client, int gpio,
+					unsigned ngpio, void *context)
+{
+	gpio_free(gpio + PCF_GPIO_ETH_DETECT);
+	return 0;
+}
+
+static struct pcf857x_platform_data pcf20_pdata = {
+	.gpio_base	= GS_IA18_S_PCF_GPIO_BASE0,
+	.n_latch	= (1 << 4),
+	.setup		= pcf8574x_0x20_setup,
+	.teardown	= pcf8574x_0x20_teardown,
+};
+
+static struct pcf857x_platform_data pcf22_pdata = {
+	.gpio_base	= GS_IA18_S_PCF_GPIO_BASE1,
+};
+
+static struct pcf857x_platform_data pcf24_pdata = {
+	.gpio_base	= GS_IA18_S_PCF_GPIO_BASE2,
+};
+
+static struct i2c_board_info __initdata gsia18s_i2c_devices[] = {
+	{ /* U1 on the GS_IA18-CB_V3 board */
+		I2C_BOARD_INFO("pcf8574", 0x20),
+		.platform_data = &pcf20_pdata,
+	},
+	{ /* U1 on the GS_2G_OPT1-A_V0 board (Alarm) */
+		I2C_BOARD_INFO("pcf8574", 0x22),
+		.platform_data = &pcf22_pdata,
+	},
+	{ /* U1 on the GS_2G-OPT23-A_V0 board (Modem) */
+		I2C_BOARD_INFO("pcf8574", 0x24),
+		.platform_data = &pcf24_pdata,
+	},
+	{ /* U161 on the GS_IA18_S-MN board */
+		I2C_BOARD_INFO("24c1024", 0x50),
+	},
+	{ /* U162 on the GS_IA18_S-MN board */
+		I2C_BOARD_INFO("24c01", 0x53),
+	},
+};
+
+/*
+ * Compact Flash
+ */
+static struct at91_cf_data __initdata gsia18s_cf1_data = {
+	.irq_pin	= AT91_PIN_PA27,
+	.det_pin	= AT91_PIN_PB30,
+	.vcc_pin	= -EINVAL,
+	.rst_pin	= AT91_PIN_PB31,
+	.chipselect	= 5,
+	.flags		= AT91_CF_TRUE_IDE,